NEW WHEELS! - My Electric Hummer Has Liquids inside?
ฝัง
- เผยแพร่เมื่อ 13 ม.ค. 2022
- We got new tires for the Electric Humvee! HUGE thanks to Trail Built Off-road for hooking us up: team.trailbuiltoffroad.com/jer... See what new wheels and tires fit your machine. Today as we near completion of our Military HMMWV turned electric, we get some new tires, add gear oil to the hubs, as well as get the Transfercase and Torquebox buttoned up and ready to roll. Cuz rolling will come soon.
Watch all the EV Humvee build videos in order HERE: • Electric EV Humvee - T...
Get my Shirts and Razor Knife here! www.jerryrigknife.com/
Anker is named as the Official Charging Partner of JerryRigEverything: ankerfast.club/JREpartnership
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
LARGE tool kit: amzn.to/2DURcr7
Travel Tool Kit: amzn.to/30LKXOY
Mega Tool Kit: amzn.to/2OwequL
Plastic Pry tools: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
Replacement phone parts: www.fixez.com/?Jer...
The camera I used to film this video: amzn.to/2p7GtkX
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: click.dji.com/AI2tmSb0onM9XPV...
TO SEND ME STUFF: See my P.O. Box on my 'About page': / jerryrigeverything
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad. - แนวปฏิบัติและการใช้ชีวิต
![[TH] VCT Pacific Stage 2 - Week 1 Day 1 // DRX vs ZETA | BLD vs TS](http://i.ytimg.com/vi/AWaOqaxN6Y0/mqdefault.jpg)
I would love to watch a breakdown of how much the entire project cost Zack. If he is comfortable with sharing that information.
Yes my guy I commented this on multiple videos. Never gets any likes but hopefully he sees this one.
Maybe after its completed and working.
Not sure how that would work when he's constantly getting sponsors or calling in other experts who are friends, which would be paid labour for anyone else.
I think he said in one of these videos it would cost less then the new Tesla truck I have no idea how much they cost though 😂 that would be a ballpark estimate
He can't give that info. If the wife fines out he will have to go into hiding.
This series is seriously addicting
addictive
No joke
That is the truth!
@Instagram User what content do you make
It's not a mistake it's a masterpiece✨
I think the wheel tire combo looks fine. Matches the theme, and will be good even if you repaint it. I can't wait to see the first test drive of this build!
Honestly Jerry, whenever I get that notification about a new video, I drop and run to my PC to watch in 4K, all the lights off and make sure there is no one disturbing me. I LOVE these videos and I cannot wait for the end but also hope these type of videos never end.
The epitome of having too much time.
"all the lights off and make sure there is no one disturbing me"
What brand of tissue do you use?
We are super stoked to be a part of this awesome build! Thanks so much Zack for letting us get you rolling with new wheels & tires! 😎🤙
Seems he didn’t like them too much being that he edited them in the thumbnail.
@@o00p 😂😂
The thumbnail wheels though 🤣
@@o00p I'm pretty sure that's just a Tesla reference for the memes 😁
they look mega too!
👍🤘🤙
"the goal is not to end up on a fail video"... I didn't get that memo!!
🐐😂😂
you learn that the hard way so others don't.
you are an Icon electroboom. if you didnt fail you wouldnt win. I really like the part where you made linus suffer though.
Love your vids!!
😂😂😂😂😂😂
Check the date of manufacturing on those tires, might be good to keep for spares. Low chance they're still the originals from all that time ago. Also cracking on the sidewall is more dangerous than cracking on the tread, especially with tires that durable I wouldn't worry too much about the cracks you show. Just make sure the side of them aren't cracking, that's how you get blowouts like Westin 😁
Such a fun project and a great series. Well done Zack.
the man gives us kg so we understand 😊
thanks
I am the cool kid from Germany making videos for the USA and the rest of the world. I will make your day so don't say nay to me today, dear atari
same here
He also translated 5 USA wheels to the rest of the world
Still don't understand they don't use the europe based metric system
@@cas8454 America still thinks rest of the world will follow them. Not anymore
This project is just badass, I've never seen something like this. Beautifully executed, nicely documented and full of interesting facts. I'm totally in love with the series and I can't wait for what is coming!
Thank you!
@@JerryRigEverything can I have the engine
@@JerryRigEverything I believe a scam is using your page, pretending that a comment won a prize, please see above 👆🏽👆🏽
I agree with this comment!! Jerry is badass over all!! So good job!!
@@JerryRigEverything 65 q
Great looking tires! Cool to hear the weight differences too. Thank you for teaching us as you are learning. Be Safe n healthy.
Very cool. I love your choice of tires and am fascinated by your whole rebuild. I had wanted to do the same with my old 1971 Series IIA Land Rover, but c'est la guerre. THanks for sharing your adventure!
Putting that intro of garage opening on repeat 😍
Where's the link to the run flat tire video?
@@yass123 in the description box
You made me watch the intro again.. Dang it!!!
It was so worth it...
@@yass123 it's named "what inside bullet proof tesla tires"
Nil I have lost all respect for what’s inside
Nice thumbnail! I can send you the Jag's old Tesla wheels if you want to put those on the Hummer :)
Judging by the thumbnail response, that would bother.... just about everyone.
@@JerryRigEverything I was looking for the thumbnail comment
@@JerryRigEverything Tesla wheels would look good. Disappointed when they didn't go on
@@JerryRigEverything I believe a scam is using your page, pretending that a comment won a prize, please see above 👆🏽👆🏽
@@JerryRigEverything I believe a scam is using your page, pretending that a comment won a prize, please see above 👆🏽👆🏽
Zach, I count six different kinds of liquids (not four):
1) brake fluid
2) power steering fluid (VAVOLINE)
3) wheel hub oil (MASTER PRO)
4) transfer case gear oil (RED LINE)
5) EV torque box gear oil (ROYAL PURPLE)
6) battery coolant
… seven if you are going to run a windshield washer pump/tank
Don't forget the wiper fluid
@@modeus905 yes … as I mentioned in my comment, wiper fluid would be #7
@@392HEMI32 what about blinker fluid
"out with the old, in with the new" - chrisfix
Seven, forgot the front and rear differentials
I was happy to see you ordered 5 wheels and tires enabling you to have a spare. We all saw what you did to that Rivian tire. :D
Awesome build project and way different than watching you mouse-proof a cabin. Cheers man!!
Now to schedule tire rotations with all five tires, so they all get used.
First time being this early. I’m a huge fan. Since I live in Seoul, S. Korea, Hummer vehicles are extremely rare, well, almost extinct here. So thanks for this upload 👍🏻
Not exactly like they’re everywhere in America either. Especially a real humvee. I have driven one on a freeway and on the streets numerous times when I was in the army. I promise you it’s far from special. They are the most uncomfortable, terrible to drive vehicles ever !!! Sharp edges and metal everywhere. Everything is hard and metal.
@@yourmommashouse 😂
Since the tires are rotational mass the effects of reduced weight are way more than just the absolute weight difference, so that 30lb/tire reduction is significant! Also any thoughts on safeguarding the drive select so it doesn't accidentally get slapped down to reverse while you're moving?
Change the switch to lock covered toggle were the cover needs to be moved (opened) to select reverse.
what's the point of a spare tire then ?
Whats odd to me, was an experiment I did with my 95 hummer. My 12 bolts with runflats and MT tires are 165 each (oof!)
I put on a set of aluminum rim and hiway tread tires from a friends pickup that was 0.25” shorter measured on the truck so sidewall flex was accounted for. Chalk tested tread so it was optimal like my tires were. I saw zero gain in mpg or the 0-60 time. Ran two tanks of fuel to get descent comparison.
The 6.5 diesel does get way worse mpg in hummer than pickups- so maybe already over taxed engine just couldn’t benifit at that level of gearing. Weight is not any more than my k3500 with 6.5 was, actually a hair less.
Another Hummer anomaly? Haha
@@udayparjane In case he needs it? What do you mean
I guess the computer doesn`t change the direction with the vehicle moving.
I love watching your electric hummer build I look forward to every video when it comes out and I'm looking forward to the next one. It makes me want to go out and try something new and go out of my comfort zone.
Love watching your videos, Zach.
From working in the garden on the ranch and your Hummer, all very interesting and thanks for sharing.
Hearing "out with the old, in with the new" brought back ChrisFix :)
Sane
That never gets oldd
"Out with the old, in with the new"
Man i swear nothing makes me smile more than Zac referring to Chrisfix.
Hey guys!!
Greetings from Finland! This project is so cool! I've enjoyed very much following it! Those wheels and rims look very 👍! Can't wait to see your first drive!
Can’t wait to see this out ripping. It is getting so close. Curious to see it out on some trails.
As an amazon warehouse worker, yes, yes i did know you can get tires shipped. Totally fucks with pallet building.
JFYI: the RTV should be applied to both the inner area and around the outside of the bolt holes. Not a crazy deal here, but with cast-iron the 3-4thou of gap created by the sealant on the inside of the bolt hole and not on the outside can crack the bolting tabs off when torqued down.
Good idea!
@@JerryRigEverything What is original purpose of the hub/wheel cap hollow rods? 2:55
@@ajtechtalks Probably for anchor points to strap the vehicle down during transport by sea/air. They are heavy, so they need multiple points of contact to keep them from becoming inadvertent missiles in the cargo bay. Air takeoff and landings are sometimes very steep, and all the sloshing of a ship makes it even more important to have as many strap points as possible.
@@ajtechtalks he says it in the video. Tie downs. Meaning securing the vehicle for transportation. There would be a shackle that lines up with that tube, and a bolt that attached the shackle to the hollow tube.
@@blazerchris5444 Indeed. Look up National Airlines flight 102. The 747 literally fell out of the sky shortly after take-off from a base in Afghanistan because an MRAP (successor to the Humvee) wasn't adequately secured. The MRAP came loose during ascent and crashed into the rear bulkhead of the plane, wrecking hydraulics and a jackscrew controlling the horizontal stabilizer in the process.
Wheels of good taste. Manly, not flashy. Proper for the purpose.
Great functionalities they included in that website.
your patient's and skill is off the charts. lots of money doesn't hurt as well.
"Out with the old, in with the new." is a tag line ChrisFix often uses, who also happens to have a Hummer. Future collab coming? :)
Would love to see that one
I doubt it...
I was searching the comments for this. Love me some ChrisFix videos.
HOPEFULLY...... Make this happen guys!!
i think it was intentional
I think this has to be said: Thank you Zack for including us people not fluent in Freedom Units. Awesome as usual. Gratz
Super excited for the finished project.
Instantly helpful! I’ve been trying to find a good parts store online for a while. Thank you jerry.
2:20 That's a ChrisFix reference. Did you change your tires because of his recent short?
i kept waiting for those tesla covers that never came
click bait
I'm glad they didn't cause Elon musk should go in a wood chipper
@@stutterpunk9573 Agreed
Thank God they never came, I was so worried when I saw the thumbnail 😅.
@@Shaddow798 we should be friends
It's looking really good! Wheels are perfect.
Everytime I watch one of these I wonder how much time and effort goes into behind the scenes talking to people, companies and finding out what is needed to get to the next step. I am enjoying this series.
It is starting to feel like this is everyone’s truck. We are are looking forward to going for a drive!
Coolant(excited for that video), transfer case, portal hubs, torque box, differentials, power steering, brakes, and _maybe_ windshield washer fluid. I count 7 or 8 liquids. Granted, some are duplicates, but there are plenty of liquids in there.
You forgot blinker fluid
And tire fluid.
You also forgot the oil in the shock absorbers, those have a special liquid as well
I forgot about power steering and washer fluid.
@@kristianstaalby8499 I don't think an electric/modern car needs blinker fluid, as the blinkers are electric
Great work man! It’s coming along nicely! Can’t wait to see you zipping around in this bad ass humvee.
I think the flat black matt was the way to go with those wheels and the tires look great. I love watching your build on this as it takes me back to my time in the Army and pushing those things to the limits. Keep up the good work.
I smile like a fool when I see an update
Wheels look spot on, good job. Can't wait to see this run
Outstanding vid! Very informative, looking forward to seeing the completed project
Jerry Love keeping up with your vids my man .iv got all my friends to watch your Projects here in Scotland .
You gotta get the rear mount for that spare man, complete the look and save the bedspace
Always waiting for your video on this project.
Love from India ❤️❤️
It's been almost a month since this last video about the HUMM EV you posted. I hope nothing went wrong 🙏🏻 and i hope it's finished soon cz we're so excited about this 🙌🏻
sweet ride! can’t wait for the roadtest!
This series taught me a lot about electric cars and also cars in general....I also wanted to have a project like this but my limited budget became a hindrance. I cant tell how badly I wait for new uploads to come. Hope I can start with my own project soon.
More like electric armoured cars ... 😂🤭👍🏼
Hi Jerry,
Did you'll paint or put a Dbrand Stick on the Hummer ?
😂😂
Dbrand for sure.
@@RamRam-dp1bj pls no, keep unique original paint
It 'll look great when painted black or matte black I think. Curious what it 'll end up with.
Thank you for your newscaster type voice. I can listen at 2x speed and understand everything you’re saying. Great video too 👍
Awesome build!!! Also, that wheel/tire package fits the vehicle perfectly.
The tire weight saving is huge, the biggest impact it has on the centrifugal weight savings of your unsprung weight. The road handling increasing exponentially
Can't wait to see this on the road! Nice tires and wheels, btw! I saw that episode where Westen was trying to drive his Hummer back across country.🤣 If it weren't for the crappy tires, he may have made it!!😆
So excited for the test drive ! 🤞
I like those tyres. The notion of having them mounted and balanced ready to drive is great.
That looks so good! 😀
Very cool as usual Zach!! So awesome to see the progress. Getting so close now? Re fluids, what about differential fluid and brake fluid? Those count!
I appreciate you documenting all this.. pretty cool gearhead stuff.
Also, don't forget to order from rareseeds or other good seed sites with your lady for the garden coming up.. start your seeds now man.
The wheels are perfect, but i love matte blacke paint heh.
Great wheels! Having watched Dakar the last few weeks I think these come pretty close. Keep up the good work.
This series is an inspiration for everyone out there wanting their own custom sets of wheels
Big fan of this series ☺️☺️
Appreciate informative videos like these.
Jerry your workmanship is really good.
Man I’m loving this series, can’t wait to see it done’
The Steering box also has some hydraulic oil fluid inside and the washer liquid required to wash the windshield is another system that use fluid in any cars ev included..
@@poplaurentiu4148 cool?
I've actually watched every minute of the Humvee series - a first on TH-cam and I want more... 😍
Well done Zack! I wonder what I'll do when this project is done 😂
Looking goooooood! I like your choice for wheels and tires I think it depends on what you’re going to do for a paint job. If a different tire would look better? I really think you should think about a clearcoat varnish finish give it that used but finished look that so many resto mod’s are sporting these days. Good luck Zack see you next video!
This project will not be a failure............. I luv all your videos....
This series is sick❤
This makes me feel like the old days before DVR, on Demand or Streaming, when you had to watch your TV show when it aired. Yes I know I can watch this anytime, but every episode ends with a Cliff hanger and I can wait to see the next. I watch as soon as I can after you publish. This is the most interesting show on any platform.
My favourite series so far, super excited for the next one
voice is so silky smooth... very cool humvee
I would love to see you doing a side to side long route with ChrisFix on his Hummer! Also describing the differences and him rating "your setup"
At 08:53, you're almost in the best position to mount that tire! Scoot a little closer, straighten out the right leg and once the holes are in line with the lug nuts, squeeze them thighs to raise the tire up to height before sliding it into place. Love the conversion so far man!
Totally Awesome Build!
I was seriously worried when I saw the thumbnail, but good job! love the series! thanks for sharing!
i’m so exited to see this thing go off road
yeaaaaaaaaaaaaaaaaaaaaaaah
US TOO!
and get towed out...
Great as always! I guess water and windshield washer fluid are 2 more liquids inside the vehicle. Not strictly necessary but not far from.
Love this channel im still waiting on my pre order Hummer EV 1st Edition
It is looking really good with those lowkey wheels. Eagerly waiting for the next update.
This has been one of my most favorite YT projects of all time. JRE you have really nailed this one! I must see more like this! I feel like this is the next evolution of the channel and I think you see it too.
I've been following this transformation and I must really congratulate you Zack. The rims and tires are spot on! Can't wait to see some off road footage, or maybe some smartphone durability test under those bad boys ;)
Those wheels look awesome Zack!
I do like the black wheels. It's a good fit for the Hummer. Thank you for the awesome video series.
Damn 2 seconds bro. Absolutely love the vids, said it once ill say it ugain thank you so much for allowing us to take this journey with you. LOVE THE HUMMER! CANT WAIT TO SEE IT AT THE END!
I'm most excited to see it painted, I'd love for everything to be recoated in sand (color) but my ocd will be happy regardless so long as everything has a consistent color
"But since we're here" yes!!
And..
That zap would be pheNOMinally bright and hot.
Awesome jerry, nice tires can’t wait to check out website to trail built off-road for my 4 runner
I love how we've been following this project for almost a year and we still have not seen the cables been organized XD
Lmao yeah
It makes my heart feel warm is fuzzy to hear you throw out a chris fix slogan! Love the build, keep it up!
Not a car enthusiast but it's refreshing to see non-gadget videos. I also find it respectable when someone builds anything from scratch or almost from scratch. Refurbishing or upgrading old things to be modern. Good project and interesting to learn a new thing or two about cars in general.
The wheels you’ve installed on the Hummer fits it Heritage! Fantastic choice and loving the videos
You are saving 13KG on each tire. that's insane! usually, when you save weight on rotating objects like UDP and tires you get amazing gains on acceleration and performance. well done!
The stock wheels on my Jetta were 29 pounds each. And they were only 15 inches in diameter
My new wheels are 13 pounds each and are 18 inches in diameter
Huge difference
Random thought about the Tesla's not including a spare- My Dad' Model 3 picks up nails like a magnet. He's needed 6 new tires in 2.5 years of ownership, because the stock whels have sound insulation inside that makes it impossible to plug.
How would anything being inside make it "impossible" to plug?
You mean tire shops just refuse to do so?
@@Nevir202 Their is a foam insulation mated to the rubber on the back side of the tread. I assume that makes it contract around a plug differently, because we tried mutiple times to no avail.
Looks absolutely beautiful
Tires look awesome.....Thanks🇺🇸
10:10 My current car (2020 model) didn't come with a spare tire, either. Instead it came with a combo compressor/repair device. When switched one way, it just acts as an air compressor. When switched another way, it injects a sealant into the air flow to fix standard punctures. Tesla probably throws something similar in their cars. Not much help in case of a blow-out, but I think blow-outs have become exceedingly rare for road-only vehicles.
To everyone who is reading this, you probably won't see me again so i hope you have a great life and achieve your dreams. Happy new year❤️😁
Commenting to boost engagements. You are incredibly entertaining. I can't imagine how much you work on this channel.
Those wheels are spot on!