Using Sends To Add FX On The X32 Rack

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ก.พ. 2021
  • In 2017 many people are getting into the Audio Book Narration Profession. The requirements concerning the ACX, as well as other Audio Book distributors are both extensive as well as easy to accomplish if you can grasp the basic concepts of Audio Requirements.
    Hello, my name is Dana and I have been recording the “Spoken Word” for 45 years. I have analyzed close to 10,000 Podcast files using the recommended standards set forth by the Audio Engineering Society, commonly referred to as the AES, to wit I am a Proud Member of.
    I am an active Narrator with the ACX. I also teach Home Recording. I have taught thousands of people how to record professional audio concerning the “Spoken Word” commonly referred to as “Speech”. If you plan on joining any of these organizations or dive into recording, I invite you to check out my other videos as well as my website @ www.danatucker.com. You can also join our community at www.x32rack.com.

ความคิดเห็น • 30

  • @IsmaelMulti
    @IsmaelMulti 3 หลายเดือนก่อน +1

    Thanks, Mr. Tucker

    • @DanaTucker1
      @DanaTucker1  3 หลายเดือนก่อน

      You’re very welcome!!

  • @JamesBermingham
    @JamesBermingham ปีที่แล้ว

    Great video again. Eagerly awaiting my X32r and these videos are just the tonic for my eager anticipation on receiving my sound board.

    • @DanaTucker1
      @DanaTucker1  ปีที่แล้ว

      You are going to love it! I have recently written some books and epubs you may find helpful as well. You can check them out here. danatucker.com/books-epubs/

  • @eddieabundiz4798
    @eddieabundiz4798 3 ปีที่แล้ว

    Im glad I found your videos! Very informative and clear. Your videos have been very helpful thank you so much! Keep up the great work!

    • @DanaTucker1
      @DanaTucker1  3 ปีที่แล้ว +1

      Awesome, thank you!

  • @kyleAradufite
    @kyleAradufite 2 ปีที่แล้ว

    Thanks for this!!
    It was very helpful!

    • @DanaTucker1
      @DanaTucker1  2 ปีที่แล้ว

      Glad it was helpful!

  • @davidjohn8277
    @davidjohn8277 ปีที่แล้ว +1

    Just got the X32 Rack in.. Hoping to figure it out.. Will be looking at your videos.. Wish you were here near Indiana.. You be worth the drive and instruction fee..

    • @DanaTucker1
      @DanaTucker1  ปีที่แล้ว

      Hey @davidjohn8277, just so you know I do one on one training via Zoom, worldwide. You can check it out here. danatucker.com/

  • @Doortodoorgeek
    @Doortodoorgeek 3 ปีที่แล้ว

    damn you're good, so much knowledge!!!

    • @DanaTucker1
      @DanaTucker1  3 ปีที่แล้ว +1

      Hey Brother. My greatness is lacking compared to yours! Aint nothing changed, I still spend hours reading through the manuals. ;-)

  • @stevendickerson8453
    @stevendickerson8453 4 วันที่ผ่านมา +1

    heloo mr obvious , long time listener and first time caller. I know this may be a dumb question but is this also how you send fx to mix buses??? Thank you

    • @DanaTucker1
      @DanaTucker1  4 วันที่ผ่านมา

      Thanks for the belly laugh this morning! Your question has two answers. 1. If you want to assign all your vocals to mix bus 1, then you can assign the FX to affect any audio signal going into bus 1, by assigning the FX to bus one. 2. If you want to assign the FX to a specific channel input into bus 1, then you would use the Sends and Returns feature.

  • @TheMellowYellowDrummer
    @TheMellowYellowDrummer 6 หลายเดือนก่อน +1

    Why do my effects only work through Bus1 and if I do 2 effects it shrieks loud …

    • @TheMellowYellowDrummer
      @TheMellowYellowDrummer 6 หลายเดือนก่อน

      My computer only recognizes bus1-5 and nothing I assign to bus 2-5 even come through my main mix (bus1)
      I’m so confused

    • @TheMellowYellowDrummer
      @TheMellowYellowDrummer 6 หลายเดือนก่อน

      If I go to the part where you turn the effects down through bud 13 that doesn’t work I can only turn them down through bus 1…

    • @DanaTucker1
      @DanaTucker1  6 หลายเดือนก่อน

      The only thing I can think of is you have your tap points set to pre fader. You need to change them to post fader.

  • @johnpearce3397
    @johnpearce3397 2 ปีที่แล้ว

    Can you get the combinator FX (multiband compressor) that is on the X32 full size mixer on the X32 rack? The FX description link doesn't show it and I'm wondering if it's possible to get it on the X32 rack. Thanks!

    • @DanaTucker1
      @DanaTucker1  2 ปีที่แล้ว +1

      I am running version 4.06 and it is available on the rack. Keep in mind that you have some effects on racks 1 through 4, that are not available on racks 5 through 8.

    • @johnpearce3397
      @johnpearce3397 2 ปีที่แล้ว +1

      @@DanaTucker1 thanks! I double checked and you’re right it’s on fx1-4. Thanks for responding!

  • @OSLiveTV
    @OSLiveTV 2 ปีที่แล้ว +1

    I don't understand the FX channels. I understand you can send the channel to the BUS with it. But, I don't want to take up a BUS. Why can't I apply the FX to the channel and adjust it on that channel? I can see it on the meters but I don't hear an effect.

    • @OSLiveTV
      @OSLiveTV 2 ปีที่แล้ว

      Wait! I figured it out!

    • @DanaTucker1
      @DanaTucker1  2 ปีที่แล้ว +2

      I am glad you figured it out. FX 5-8 are for inserting channels. FX 1-4 are for sends.

    • @OSLiveTV
      @OSLiveTV 2 ปีที่แล้ว

      @@DanaTucker1 Is it possible to route the signal to the Aux channel, insert an FX, and use it as a BUS? Instead of BUS13 for instance.

    • @DanaTucker1
      @DanaTucker1  2 ปีที่แล้ว +1

      Not like you are thinking. You can do it, but it will be for only one source.

  • @letsfolknl
    @letsfolknl 2 ปีที่แล้ว

    Can we do it the same with our in ear monitor?

    • @DanaTucker1
      @DanaTucker1  2 ปีที่แล้ว

      Yes and you would add t into the bus you have the effect added to.

  • @user-nm6sw6wy3p
    @user-nm6sw6wy3p 2 ปีที่แล้ว

    Hello! You can ask for your videos to make subtitles in Russian. I will be very grateful to you. You have an interesting channel. But I just don't know English.

    • @DanaTucker1
      @DanaTucker1  2 ปีที่แล้ว

      I could try but I don't even know how would I even do that.