How to replace rear springs and shocks on a Fiat Panda 4x4 - UK Panda 4x4
ฝัง
- เผยแพร่เมื่อ 13 ก.พ. 2021
- Lift spacers available here: www.ebay.co.uk/usr/uk-tema4x4...
Music:
Airglow - New Touch
Home - Above All
Home - Synchronize
Music can be found here:
Free Music Archive www.freemusicarchive.org/
RoyaltyFreePlanet / @royaltyfreeplanet
Get Merch!
ukpanda4x4.creator-spring.com
Join us through Facebook & Instagram for more tomfoolery.
ukpanda4x4
groups/UKPanda4x4
ukpanda4x4 - ยานยนต์และพาหนะ
Hi mate , well done from Italy 🇮🇹
Full walk round video ....and things to look out for as a new buyer on a panda 4x4 would be a great video....this one 10/10 easy to follow what you did for anyone doing the same ...top job pal.
Thanks so much! This is exactly the upgrade I was about to make! Greetings from Italy
Really enjoyed the video especially when watching somebody else do all the work! Regards Mick
Thanks for providing many subtitles.!
After watching your videos i just bought a panda 4x4
Loving your work! Keep it up 👍🏼
Thanks very much for this video.
Ive been thinking about changing the rear shocks and springs on our Panda Cross.
Thanks for sharing and keep em coming
The only difficult bit is fitting the new springs but it just takes muscle rather than skill or experience. It's an easy job only requiring simple hand tools so go for it!
@@LastOfTheLookers1 I have some straps that I use when removing coil springs and refitting them.
They worked on Land Rover Discovery springs so they shouldn't have any problems with the Panda ones.
Where did you get the Springs and Shocks from?
@@GrandadBaz KYB springs from Autodoc, B4 shocks from Bilstein
@@LastOfTheLookers1 Thanks very much for the reply Ben.
Great video. You showed everything I needed to know. Thanks
Only positives from myself, I have always liked the mk 3 panda and maybe 🤔 at some point I would like to have a test drive and possibly purchase one and with 4 wheel drive , however the work that you’ve done on your vehicle 🚗 seems to be really easy to do so yeah you did a great video with no long winded explanations of what you were doing and the camera angles were spot on and I would to see some more like it please.
Thanks for the feedback, much appreciated!
Hi great video and really useful keep them coming please.
Fantastic good informative video only thing I would say is tighten the shock bolts when there is load on them
Salut, merci à toi, j'ai la même Panda...j'ai appris des choses.
I'm sure I seen this crazy thing when I was at work 👌
Grate video very helpful 👍🏻
Great video 👍🏻
Great video m8.. more hands on like this please
Nice one!
truly a great job and great business! I am so interested in all the changes you have made to your panda. what kind of tires do you mount? which brand?
Nice video.
Great video thank you, I think I'll be investing in a lift, did you have to trim the arches?
Genial saludos cordiales desde Patagonia Chile
Great vidio and great car too! I had the old shape panda many years ago and i loved it.. would like one that shape now. It looks just as capable how you have it.
Check out our other videos to see how it stacks up against the classic Pandas off road
I really like your Panda:)
Thanks! Check out our other videos to see it in action along with all the other members cars
Just looking for inspiration as my 4x4 panda has a funny noise on the rear I think its nsr its like a horses hoof trotting ? wheel bearing ? CV joint ? brake calliper ? just replaced the centre prop shaft bearing ... it maybe the tyre but its a brand new ? ... been stood for a few months since winter which probably doesn't help
How did you do the lift? What sz tyres ?
Ciao che rialzi monti ?? Complimenti
Genial saludos cordiales desde Patagonia Chile.. Mi amigo necesito ayuda..
Great video,well explained in a chilled-clear way. Keep on that way please!
Some (and always many) questions regarding the lift since I am in the process of fitting them and therefore I search for the realistic truth.
Do you have any noticeable drawbacks regarding camber angles, shortage of driveshafts, degradation of bushings/ball-joints/bearings, increased bump-stop noises?
If so are there any remedies to the above e.g camber-bolts, lubricating joints more often, etc.? What about the ARB, is it better to use spacers for it as well?
Many cheers
Camber is not great, with road tyres on, I get heavy wear on the outside of the front wheels. I haven't looked at fixing this as the car doesn't do many miles.
The OSF driveshaft hits the control arm with a 30mm lift. 20mm is the recommended maximum from my point of view.
The anti roll bar also hits the control arms on both sides, I have some shorter droplinks to be fitted to try and raise the ARB a bit to give more clearance.
On compression the suspension is very smooth with no harsh bottom out (new Bilstein shocks all round and new springs)
where did you get the caps you use on your wheels? looks great!
They are from an Uno (I think) found on eBay
Thanks for posting. Just one criticism, the music was a bit too intrusive.
Well done! Did you use standard height shock absorbers with this lift spacers?
Yes the springs are made by KYB and are the ones recommended for a stock Panda 4x4. The shocks are Bilstein B4's and are for a stock Panda 4x4 straight from the Bilstein website.
Salut, j'aimerais connaitre les dimensions de tes jantes et de tes pneus...merci a toi. Alain
were can i buy springs like this?
Cool, but may-be you could have compressed the springs with strong zipties. It might have made the job a little easier! Nice job anyway!
Very nice mate ❤ I plan to get one of these,just wonder if yours have diff lock? Can you go off road with no diff lock 4x4 panda? Becoz the one I plan to get have no diff lock
No Pandas have locking diffs. The Mk4s and some Mk3s have ELD (electronic locking differential) which uses the ABS system to simulate a locking diff or LSD but both differentials on all Pandas are open. They cope just fine off road as you can see from our videos 👍
Hello, great video thanks. Can you tell me what size tyres and wheels you have on your panda, please? I've got a MK3 2013 diesel and want to put some steel wheels and grippy tyres for off-road.
We have a video explaining all of the modifications on this car
Nice work, I'm looking to get one myself at some point my budget would be up to 5k max. I've been looking at the twin air versions? Any advice on which one to go for and why, Thanks
There was no TwinAir Mk3 (169). You would need a Mk4 (319). Our Facebook group is the best place for information. Use the search function as many people have asked this question before.
Does anyone know how to do this to 2001 fiat panda?
Good job!
I own an 169 4x4 and want to lift it up a bit.
What kind of rims and tyres do you use respectively what is the whole setup?
Thanks from Germany!
Hi Andy, please join our Facebook group for information on the modifications on this car and others
Io ho da poco preso una panda 4x4 seconda serie usata Cosa mi consigliate di fare come modifiche? Non abito in montagna abito a Milano Italia ma vado spesso nelle montagne che ci sono in confine con la Svizzera
Im gonna get a panda like this one. I have a panda 1.4 but I really like the idea of a 4x4 panda. I would like to turn it into a rally/track car
What’s the widest tyre size that would fit with enough clearance?
The width of a tyre is only one factor. You need to consider the tread height, wheel width, tyre profile and whether or not you want to use hub spacers or not. www.willtheyfit.com is a great site for researching non standard wheel/tyre options. There is only so much research you can do before you need to just fit a tyre and see if it works.
Hello mate , cheers from Greece, just bought a panda 1.3 mtj climb and I m searching for tyres...how did you manage to put a/t tyres on the small beast? Thanks in advanced
Please join our Facebook group for details of the modifications on this car and others in the group
Well done! Can you tell me the size and the type of the tyres??
Please join our Facebook group for all the details of modifications on this car and others like it
Could you make a tutorial on how to lift your car. I have a 4x4 van stock, and i'd like to raise it for 3 to 5 cm, and i dont even know where to start 🥺
We will be making a video focusing on the lifted silver Mk3 at some point
We don't use WD-40, we use penetrating oil, which is the right thing for the job and will make a huge difference in jobs like this
Please tire dimensions?
What’s the size and specs of you’re wheels?!
Please join our Facebook group for all the details of modifications on this car and others like it
Hi, I’d like to know the dimensions of your rims and tires. Alain (France)
Please join our Facebook group for details of the modifications on this car and others in the group
@@UKPanda4x4 Ok thank you
Please tell me what rubber gaskets did you use under the springs.I dont have Facebook please tell me heare on TH-cam