If it didn't work there would be a MUCH Bigger Explosion @ his Gas Source or even on that long hose! Here is a HUGH HHO Explosion with just a small amount of GAS th-cam.com/video/3aCQ12j2cfY/w-d-xo.html
I still don't have the injector adapters done yet the machine shop is taking way to long to do it I think I'm going to find a different machinist to machine the parts I need so I can do more testing and start working the bugs out of the best design yet!
Why would the tube melt is the flashback takes a fraction of a second? The gas completely consumes itself. I have more than a couple of comments here. I had no idea that people wouldn't understand how it works. I will be doing another video. So If you could see the flashback getting to the arrestor would you believe it? Maybe a video in the dark?
I know you write this a month ago but I just saw it. If you understand how hho burns you will know that it burned right up the clear tube to the arrestor. It isn't drawn out. In the video you can actually see the flash at the arrestor.
Incorrect. Seperator cells need flash arrestors too. This is because inside the cell a membrane is used to sperate the O from the H. This membrane has very small holes in it so that water can pass through and this electrons. If the pressure on one side of the membrane is different to the other, it is possible for the gasses to mix slightly. Ive seen it happen. Always use a flash arrestor.
Sounds good man! I am settled in for the most part! I am working on a more improved fuel vapor bubbler system which should give consistent results and will have it installed and running in my Jeep when I stop by if all goes as planned!
This unit doesn't use bronze or ss wool so it flows a lot better. also if the ss wool type arrestor is not packed right it can fail. I think people buy these to be safe. Getting it wrong can be dangerous. An exploding tank of caustic KOH will ruin your day.
@@Hydrogen4Health thanks for your reply. But I mean, that the electrolyte contains NaOH or KOH. When it will dry in the arrestor, will the arrestor still sending the hydrogene or will close?
No moving equipment known in this planet including those that could no longer move because of extreme weight will need your 12 liters per minute of HHO delvis. Just where the hell are you going to apply this kind of production? On a gigantic space city run by internal combustion engine? Unless of course you would want to separate the gasses and store that 12 lpm of Hydrogen and sell it until you get rich.
Hi, i don't understand why you trust all these plastic and not professional items...you can buy from a storeshop professional tested [having iso & Din] for asetiline or propanium ....other way is a simple ''water trapper'', or a flashback which ingludes charcoal [just like black sand] . I work in a big factoty in Greece and we've a serie of mechanical ,charcoal and water trap...in serie .HHO is more explosive 2.5 than gasoline...so nothing is innocent.
I am running the alternator at about 60 amps. I don't push it high unless I'm doing an experiment. So far so good !
It prevents a engine backfire from reaching the hho system reservoir tank and blowing it up.
To prove your flash Arrester works please use clear tubing on both sides of it and do it in a darkened room
If it didn't work there would be a MUCH Bigger Explosion @ his Gas Source or even on that long hose! Here is a HUGH HHO Explosion with just a small amount of GAS th-cam.com/video/3aCQ12j2cfY/w-d-xo.html
Great system for a torch setup, I don't need 12 lpm but very instructable
Very nice video. Is the idea of the arrestor to allow gas through but stop a flame going back because the metal wool conducts away it's heat?
It's not made with medal wool but yes it stops the flame from going through.
@@Hydrogen4Health so how does it allow gas through but not a flame the other way?
I still don't have the injector adapters done yet the machine shop is taking way to long to do it I think I'm going to find a different machinist to machine the parts I need so I can do more testing and start working the bugs out of the best design yet!
Looks impressive, very compact and effective.
Why would the tube melt is the flashback takes a fraction of a second? The gas completely consumes itself. I have more than a couple of comments here. I had no idea that people wouldn't understand how it works. I will be doing another video. So If you could see the flashback getting to the arrestor would you believe it? Maybe a video in the dark?
I know you write this a month ago but I just saw it. If you understand how hho burns you will know that it burned right up the clear tube to the arrestor. It isn't drawn out. In the video you can actually see the flash at the arrestor.
separator cells are a complicated and costly design. That's why people don't do it. but yes that would negate the need for a flash arrestor.
Incorrect. Seperator cells need flash arrestors too. This is because inside the cell a membrane is used to sperate the O from the H. This membrane has very small holes in it so that water can pass through and this electrons. If the pressure on one side of the membrane is different to the other, it is possible for the gasses to mix slightly. Ive seen it happen. Always use a flash arrestor.
Sounds good man! I am settled in for the most part! I am working on a more improved fuel vapor bubbler system which should give consistent results and will have it installed and running in my Jeep when I stop by if all goes as planned!
This unit doesn't use bronze or ss wool so it flows a lot better. also if the ss wool type arrestor is not packed right it can fail. I think people buy these to be safe. Getting it wrong can be dangerous. An exploding tank of caustic KOH will ruin your day.
You are indeed vary CORRECT! This is exactly what can happen.
Cool :) Build a canopy with (3) 140 watt solar panels on the roof. (21A in bright sun). My cost on those is $180 ea. + shipping.
justin from jdc products. did you buy his flash back arrester and make yours just like his? looks like the same arrester
why not use separate hoses for the H and O and mix them where needed? no better flashback arresting possible...
Looks good! how's that alternator holding up? Have you been daily driving the 160A or so system? cheers
Who is Justin. I've got a friend named Justin but he is not into hho. Why would you want to buy one and take it apart?
Thank you for video , Respect from Romania!
? why not put two check valves in series they use them on air conditioning heat pump you can buy a brass ones at AC store
There's videos that show that doesn't work even with four of them in series.
Is it possible to supply a car with enough power to run a water welder inside a car to produce your own gas?
So why is it not staying lit?
Did you watch the video?
That doesn't seem like enough gas to run a full-size truck?
Hi do you sell these units and at what price
Nice demo Steve!
are these made just like justins flash arrestors
?
What are the Steel plates for ?
Does this arrestor work if the gaz is not totaly dry? It means a little bit of electrolyte is in the hose.
It actually works better with wet gas.
@@Hydrogen4Health thanks for your reply. But I mean, that the electrolyte contains NaOH or KOH. When it will dry in the arrestor, will the arrestor still sending the hydrogene or will close?
Can i use oxygen flashback arrestor for hydrogen gas ?
NO HHO burns 100 times faster than straight hydrogen. You need a specialized flash arrestor.
@@Hydrogen4Health I'm using 1.5 bar pure hydrogen. Can i use oxygen flashback arrestor? Is it a problem?
so if i give you 12 bucks for that thing, will it look just like justins, when i take it apart?
can you pls. tell me what the arrestors are for?
When ever you get moved and settled come on down and see me.
Are you just running hho on that truck?
You build that truck? Too cool
i am going to get some of yours. looks good.
i dont understand the buying of these things,they are very easy to make and can be made as small as you want.
i buy 4 of these from you. you better hope they work as good as this one in this video LOL
There isn't any way to store hho safely so please don't try it. People have died trying.
with this system how much % do you save fuel
💯
No moving equipment known in this planet including those that could no longer move because of extreme weight will need your 12 liters per minute of HHO delvis. Just where the hell are you going to apply this kind of production? On a gigantic space city run by internal combustion engine? Unless of course you would want to separate the gasses and store that 12 lpm of Hydrogen and sell it until you get rich.
There good arrestors. I'm sure toy will like them.
if i didn't think they were good i wouldn't buy them LOL
Hi, i don't understand why you trust all these plastic and not professional items...you can buy from a storeshop professional tested [having iso & Din] for asetiline or propanium ....other way is a simple ''water trapper'', or a flashback which ingludes charcoal [just like black sand] . I work in a big factoty in Greece and we've a serie of mechanical ,charcoal and water trap...in serie .HHO is more explosive 2.5 than gasoline...so nothing is innocent.
so was michael jackson
Nice.
nice job
But nice work
@MrKillacrash