PreRunner Bumper Build! Winch Bumper Metal Fabrication How To
ฝัง
- เผยแพร่เมื่อ 14 มิ.ย. 2020
- Who doesn't want a sweet PreRunner style winch bumper? Not only does it give you a place to mount your winch but these style bumpers look soooo off road. Something like this can be added to any 4x4 with the right metal fabrication skills and creativity. Like I say in the video, good ideas and designs take time to develop. I know I could have slapped this bumper together but I don't want to leave any good ideas on the table. After some time to think it over, I plan on polishing off the finer details and finishing this one of a kind bumper!
Thank you for watching and thank you Barnes 4WD for being an active sponsor of the channel!
Barnes 4WD COUPON CODE: "dirtlifestyle" 10% off
www.barnes4wd.com/?ApplyPromo...
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
ONX MAPS: webmap.onxmaps.com/account-pu...
MIDLAND RADIOS: bit.ly/2IjmlZD
STEP 22:
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon!
/ dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
#offroadbumper #prerunner #fabrication - ยานยนต์และพาหนะ
![BOWKYLION - เจ้านายคะ (work-life imbalance) [Official MV]](http://i.ytimg.com/vi/6bFj8G2pOi4/mqdefault.jpg)
Go! Build! Be creative! You don't need to be an experienced fabricator to make great parts and peices for your project! Thank you for watching guys! And if you are looking for some great builder parts visit Barnes 4WD. Click the link and use the coupon code "dirtlifestyle" to save 10% 🤘
Link 👇
www.barnes4wd.com/?ApplyPromo=dirtlifestyle
How much for detailed plans for that bumper?I have a 2005 liberty with 3inch lift can't afford the arb bumper($1400)yours looks just as good as theirs
I like this motivation. Thank you. Just finished cleaning up the shop, maybe I’ll get into it this summer.
Hiya bud recently subscribed to your channel I'm from the UK SuperWinch is well was a UK based company and brand iv got a couple of their winches but the winch that you are using in this episode doesn't look like any of the winches they have on the market here I was wondering if it's a case of it's similar to the warn as you said in construction and then sold under a different licence or something similar also do you know what motor is in it because over here the EP9 or EP9.5 you can get a bigger motor for not that much called a Bow motor there are 3 models 1, 2, and 2+ they used to do a 3 but have stopped using it now but the Bow 2+ turns the EP9 and similar into a hell of a setup and quite fast aswell
I'm in AU and loving these from scratch Fab eps dude... the hoop looks really good as you did it (super neat) - but one thing I noticed, you cant get the winch out to service it without pulling the whole bar off.
The method to my madness is the harder to get to it, equals less likely to happen and with service parts thats not a good thing.
Ive been waiting months for this video. Thanks a lot for sharing this.. Where is the blueprint? Cheers.
How to be awesome
1 - Weld as good as Nate
2 - Design cool things like him
3 - Be organized like him
I think I have a chance on number two
Lol awesome
Also have a tube bender like him lol
My favorite part about your videos is the fact that you set the example that it’s okay to take a step back and give your thoughts time to form. You go into a project partially blind and let it take shape on its own. Your breakdown of the basic fabricating principles is what I’m learning the most of from you.. Huge Thank you from me to you.
Love that you’re tackling IFS stuff too - 4Runner owner
I like IFS! It is way under rated! I might custom fab my own center section and lift. Time will tell 👍
@@DirtLifestyle Do it :) I'd love to see that!!!!!
Next thing you know he'll be working on fully independent rigs :P
I belive Jaguars had dana 44 rear diffs with flanged outputs instead of tubes if your going to do a rear independent
After watching the KOH Ultra4 trucks tear it up I am really interested in IFS stuff too.
15:50 ish. The bumper is done
My eye looking at the single tac on the top bar: are you sure about that
exactly my thoughts
Nice message about energy transfer...too many bumpers get built that will transfer a high amount of energy to the passenger compartment. Looks good, can't wait to see the next one on this build!
Came here to post this. Bumpers are supposed to sacrifice themselves.
Scrolls down, looking for comment about energy absorption... ah, here we are. This. 100% this. It's a safety feature, not a battering ram.
When I worked in the body industry, they were referred to as "damage multipliers."
I love that you're doing this to a liberty
Also bender on the bender for the win 👊
Thanks bro 👊
I was gonna say that also -Bender on the bender
This dude is an artist. And crazy knowable.
Best build video I've seen in a bit
Great video. Im building bumpers and repeatedly referring back to your bumper builds. Thank you.
It wouldn't be a Dirt Lifestyle fab project without dimple dies.
Rock on dude. Yea, I wanted this video to be an hour long. You are how I chill from a bad day at work. So thank you for that. But I realize a lot of your audience has "A.D.D.", and can't watch a video that long. Looking forward to the final product.
That bumper looks fantastic, the tube on top really brings it together. Keep up the awesome work mate.
This is probably one of my favorite bumpers you have made.. love the prerunner look! Cracked me up how you said sorry for having to cut it short.. a 20 min video with good content. I once again appreciate the good content and love what your doing.. But now you gotta make a rear tire carrier bumper.. lmao
Very , very nice Bumper .... can wait to see the final product .
watching your vids from BC, I'm a firm believer in fabricating projects properly, if it takes a little longer, who cares, the satisfactory result is all that matters.
Wow, 8 days. I always love your videos but man, that’s something else. I appreciate how you pushed pause on the build; that only comes with the experience of pushing too hard and screwing something up.
this guy knows how to build
And yet another excellent fabrication. Way to go Nate.
Can we take a minute to appreciate wives/ girlfriends that support this kinda stuff. Super rare. Super underrated.
I know nothing of welding, fabrication, or even off roading(yet) but I can't stop watching your videos..
Keep them videos comin'! 👍
I had a 2005 Jeep Liberty Renegade in my past and it had a BDS suspension lift kit. Wish I found the channel when I had it. My Liberty needed to have a better bumper. I like the design and function of the bumper as well as the Skid plate. I took it off road at AOAA and Rausch Creek in PA. My tire choice was BF Goodrich All-Terrain T/A KO2 and they worked great. Thank you for a great video.
No need at all to apologize for not being able to finish the bumper in one video. Most youtubers would take 5 to 10 videos to get done what you did in this one video. Keep up the good work.
Can't wait to see it finished
Glad you mentioned the bumper absorbing energy in a crash.
I know it’s rare, but it’s smart.
Manufactures have made leaps and bounds in crash test standards over just the last 20-30 years so it’s good to acknowledge that for ones safety.
Definitely makes me reconsider the Liberty.
I definitely slid box tube into the channel in the front of my ZJ. With a little bit of careful measuring and slotting and a bit of persuasion from a large hammer, I got that tube about a foot deep. Then I clamped the sheet metal on both sides with some 1/4in plate and five 9/16 grade 8 bolts all the way through.
It would take an act of god to pull my front bumper off my ZJ. And believe me, I've tried.
I also cut that front "bumper"/cross member out and recessed my winch as far back as I could. It is about 1/4in from the AC condenser. I cut the bottom of the grill off to fit the winch.
I also pulled out the radiator support and replaced it with a much stronger one that I made and bolted that up through the box tube inside the frame rails.
My approach angle was MASSIVELY improved. It is the best approach angle possible on a ZJ while only running 33s.
Great job bro! As a fellow fabricator DYI guy taking time to do it right is the way to go... especially with multiple projects!
Looking good so far... totally agree and it's why I enjoy your buids. Looking forward to seeing the progress of the project.
This looks amazing really excited for you to tackle the kJ platform
I'm digging this oddball stuff! And damn that paint looks nice on that thing
As always, it’s so enjoyable watching someone that genuinely enjoys creating something from nothing! I can’t wait to see how the bumper turns out. Keep the awesome videos coming Nate!
Thanks buddy 🤘
Nice work. Beautiful look with the skid plate. Cant wait to see this project done.
Just became a Patreon supporter. Should have done it months ago. Thank you for the channel.
Thank you very much for the support!
Nate- Don’t mention it. I need to buy/build a new winch bumper. The one I have is bent. Seeing your process, I may just build a bumper that will hold up vs spending absurd money on a replacement
Slick work. I love your creativity. I am no where near as good as you but I fabbed up my own battery tray from my old 79 K20 last weekend. I look halfway decent and is solid and a rock so that make me happy. I was definitely inspired by you.
Music sounds like I'm watching Letter Kenny. lol Love this video and everything you do!
So glad to see you finally getting started on the liberty!!
Good for you, putting your creativity and end product quality over satisfying some viewers. Who you are, what you do, is very unique and much appreciated. Thank you for setting a good example, going the extra mile to create something you'll be proud of every time you see, instead of regretful. Great channel, keep it up!
You did a helluva job making this bumper even though it's not quite perfect in your opinion but I like what I saw .Thank you
The liberty is an interesting vehicle, a GREAT Mercedes German made engine which is bullet proof and the basic hardware of a great 4wd
I want a master of all things garage!!!
Hey man, sometimes you just need time. There have been many times where I had to put a project to the side and work on something else because I hit the proverbial brick wall. Do what you gotta do, brother. We'll be here. Heck, consider this a cliffhanger. Lol.
In the meantime, would love to see that tailgate build on the Dodge. Just a thought.
Man, these sliding slomo shots with the sparks flying... awesome!
Yeah, Nate, you got some skills man, in building, and in filmmaking. Love watching you fabricate. Also, the Bender on the bender, that's fantastic.
This bumper looks awesome
Looks great! The bumper, winch, and lights are worth more than the vehicle! haha
You need the Old Man Emu lift for the CRD! OME 790 front springs and OME 948 rear with their front struts and 132L rear shocks, and bumpstops. Then you can build your own brake line extension for the rear. You and your wife will love it, esp off road!! We have built over 400 Liberties and a ton of CRD KJs.
I have Hemi WK. It is the family rig. I do all the work on it and make as much custom parts as I can. I plan to build my own winch bumper and this was a great watch.
I look forward to seeing it finished, but do what you have to do man. Quality craftsmanship and a well thought out design take time.
Yes! Great video, as always. Looking forward to the next
Dude Nate! That turned out so nice! I can't wait to see the finished product. I envy you and your talent. I hope eventually I will get to play with my welder and start making stuff for my jeeps. Thanks for the channel and the inspiration.
That look awesome! I need to build an off-road bumper for my Ranger. Might take a couple dealing ideas here. Glad your being honest with yourself in the finish of this one, makes for a not rushed finish. Look forward to the next vid.
Great job love the look of it great video content and I hope you know how many of us are out there that love to build from what in our head and some time you have to just take a step back and recharge and clear your head so we can get a fresh start at it .
Thanks again
Keep up with the great content !!
the bumper turned out awesome! I wish I had the guts to do that to the front of my Chevy Silverado. Because I want to put a winch on the front, but i have no solid place to fasten it. I saw this after you gave it to your brother and finished the build pretty much recently. Which I thought turned out awesome! Glad I got to see this part.
Wow this is coming together really well. An awesome job as always.
I am beyond stoked to see this video! As a liberty owner (and lover) this is really giving me great ideas for bumper. Can't wait to see whats next. And yea I agree about the chrome. That was the first thing I did when I bought mine, got ride of all the chrome changed it to black. These are such capable jeeps, the places I've taken mine so far blow my mine.
Thanks for inspiring me!
Washer fluid container - common solution most of use do is pull it out, cut the neck off, plastic weld it to be way shorter and shove it in the engine bay. It fits nicely (at least on the 3.7L engine model)
First car I ever owned 2003 Jeep Cherokee (Liberty) ltd 3.7L V6 petrol, absolutely loved this car! Exited to see how yours turns out.
Glad Barnes is on board with you
Nate, I love your builds and the fact that you want to do it right, which takes time. Be sure to show us the final bumper when completed!
Looks awesome that cars going to get a lot of looks when your driving that's for sure
Let your brain juices simmer for a bit for the details. So far, it looks AWESOME!
I have to admit, I was skeptical you were going to be able to make that look good. But once again it looks bad ass. Bravo sir!
I like the fact that you take impact into consideration when designing your bumper. This is my issue with most of the aftermarket ones. They’re so heavy, they’ll end up bending the frame.
Bumper is looking great! Looking forward to the next video.
Love the channel, and all the work you do. Can't wait to start learning to fab up some things on my 78 J10.
Fabulous job, Nate! I love how it just came together piece by piece. Two thumbs up man!
Thanks man 👍
Take your time; your work is spot on!
Alert us when you resume! Thanks
That looks really good. I'm thinking something similar but with a front reciever for a portable winch. My Liberty is a 2002 with OME lift
Looking forward to seeing it completed, keep up the excellent work 👍
Thank you!
YOU ARE AMAZING! I think you fab videos are my favorite. You make it look "Do-able" for vehicle that there is not a cool option out there. Thank you.
That was outstanding. Skid was perfect. Love watching you exersize your skills. Cheers.
I wish I was half as talented as you. You inspire me, thanks and keep building.
Thank you! I appreciate the positive comment 🤘
Dude, I'm loving your vids and builds! Nice time to step back before moving on, done that a few times.
Your videos have really been motivating me to build things for my Jeep. Keep em going!
A 2003 jeep liberty was the first vehicle i ever had. 2wd so i never got to modify it. But man you make that bumper look better than anything ive seen for them.
Thanks buddy 🤘
I use CAD to figure up what the bumper is going to look like - Cardboard Aided Design. Cut the cardboard into the shapes of the bumper and (tape) tack it together. Quick and easy to change the design with a razor blade and tape. Get it sorted, then cut it apart and use it as template on the steel.
Damn, that was a lot of work! Not sure I would put that into a kj but I trust your process haha. Cant wait to see it hit some trails!
Thank you for making this video! Love it!
Awesome build! I’ve been wanting to do something similar for my 06 Sierra, keep the build going!
This is an awesome build! I'm excited that you are working on a Liberty since there is not a lot people that work on these. I have an '05 also and can't wait to see the other awesome stuff you got in store for this rig. Keep up the great work!
I remember watching your early vid on trying to decide on making the liberty or the rover an overlander. I'm glad to see you didn't just get rid of the jeep and found a cool little project for it.
I think you are the best fabricator and video maker here on youtube. I love your videos and builds.
Excellent content, Nate. Thanks for the tips!
Good work man keep it up
How much you wanna bet this Jeep Liberty is going to go from, "small bumper upgrade" to a full blown "rock crawler" in about 6-months?
Lol
Put some Dana 44s under this thing.
Your prediction came true!
I would DEFINITELY not put money on that kind of bet.
So good Nate!!!
I like the way you design as you go! As an engineer I always design my stuff in CAD before and it's interesting to see the other way around. Sweet looking bumper!
Thanks!
Love this been waiting for the liberty build to start
Sweet build! you're lucky to have the time to stay true to yourself/your ideas. If you can make a Liberty look and function well, you can make anything!
Bumper looks good so far, and for me I appreciate taking your time in the videos and explaining where some of your thinking is coming from, my wife blames you for giving me the fab bug, but she does like the new truck bed safari rack I made, anyway good work man, great videos. Keep it up. 👍
This looks awsome! Kinda wanna do one for my escape, but that's supposed to be my grocery getter. Just a quick thing I noticed was the bar is only tacked even once the rest of the bumper is welded. It's an awsome project just did want anything missed. Take your time, love watching these videos because it reminds gives me motivation to get back into off roading and truck stuff, thank you so much.
"Weird faux frame thing" is my new favorite term for unibody. Ha!
You have such great videos! I'm no fabricator but you make it look so easy. After watching a few of your videos I have the illusion I can do it too! Great content man def underrated content creator.
Looks awesome Nate!
Looks like another masterpiece in the making. I sure like what you have done up to this point. Curious how this plays out, will be anticipating the outcome.
I really appreciate your vids. Keep em comin!
If my opinion matters you're doing it right Nate. Much appreciation! Being a grown-up is so annoying 😒 sometimes lol.
Keep up the quality work! Looks good!
I think the bumper would look really good with those fog lights recessed inside of those 2 large flat plates on the front of the bumper. I'm not sure if you have the space behind there or if you even like that look but I figure it's worth putting in my 2 cents. Great video 👍
Agreed , have them look like they are one with the bumper. But couldn't agree more awesome build to come!
Nice build! Looks great with the skid plate.
The bumper looks great! Great inspiration for our (someday soon) XJ bumper build.