1890's Blacksmith Forge ~ RESTORATION & REPAIR
ฝัง
- เผยแพร่เมื่อ 30 ส.ค. 2019
- This old blacksmiths coal lever forge has been outside for decades, and was completely rusted and seized up! Something made a home in the blower housing, and the 3 major cast iron parts were cracked and need major attention!
I didn't line the forge with refractory or anything else, because I want to know what you suggest for a forge like this!?! What would you do and why?
I'd love to know your thoughts on this project!
Please consider supporting the channel by buying these tools & materials for your project using the links below! It helps support the channel & won't cost you anything more!
Materials USED in the VIDEO:
My "Special Sauce" - amzn.to/2KuEkdv
Rust Remover - amzn.to/33VG07D
Brazing rod - amzn.to/2ZE87co
Cold Bluing - amzn.to/2TXawtA
Metal Epoxy - amzn.to/31Z9cZR
Boiled Linseed Oil - amzn.to/2HngUoQ
High Heat Primer - amzn.to/2CQlGZd
Self Etching Primer - amzn.to/2qXiIj9
Paint Pens - amzn.to/2NTcAkT
Tools USED in the VIDEO:
Electric Die Grinder - amzn.to/2QrvmBu
Carbide Metal Cutting Burr Set - amzn.to/2NT9TQi
Sockets for square head bolts (8 point) - amzn.to/2QurFLd
Manual Impact Bit Driver - amzn.to/33S1thA
Ratcheting Bar Clamps - amzn.to/2OkFOrR
Clamping Chain Wrench - amzn.to/2XsUut5
Wire cup brush for Angle Grinder - amzn.to/2Kx1Oi3
If you have any suggestions, questions, or comments, please leave them below!
Thanks for stopping by, I truly appreciate your support!
Feel free to donate towards future projects on my Patreon page Below, I would really appreciate it.
★Patreon★ / salvageworkshop
Follow my Instagram for what I'm up to on a daily basis!
★Instagram★ / salvageworkshop
#Restoration #OldTools #Forge - บันเทิง
![1908 Wine Corking Machine [Restoration]](http://i.ytimg.com/vi/76XtdyYIt_0/mqdefault.jpg)
The lubricator on the support for the handle shaft is designed to hold grease.
You are supposed to fill the base up level with grease then fill the cap up level with it, then you screw the cap on to the base just a turn or two to squeeze enough grease through to lubricate the shaft.
After that, you just need to give the cap a half turn or so now and then to add more grease as needed until the whole thing needs refilling!
Very cool project.
I actually just came to the comment to say that your Weimaraner and chocolate Lab at 28:30 are ringers for ours who passed a while back.
The Lab was the eager inquisitive friendly goof, the Weimaraner the reserved, serious one who went along with the Lab when he got out of our yard to keep him out of trouble. I miss them, and I'm glad to see your are so obviously well loved.
Thank you for the compliment! All of our dogs are Weimaraners! The dark ones are Blue Weims, and the light ones are Silver Weims!
@@SalvageWorkshop I didn't know blues were a thing but they still look well-loved.
amazing You remind me of my daddy, but he were alive he would be 96. He knew how to do all this stuff. Young people today don't appreciate the old stuff and certainly aren't interested in restoring it. Bravo
I love these kinds of restorations. It's like quiet contemplation, almost, and I love seeing things restored back to usable, practical condition.
Me too!
...and these old cast iron things look better than the cheaply made, toss-out new stuff.
I didn’t think it could be restored as well as you did. Awesome job.
I always love how old tools spring back to life with some TLC, cleaning, and repair. Great job. I've brought back to life many an old tool from my granddad and great grandfather's time. They are in many ways better than a new tool. Love this
Excellent Job You saved a excellent piece of history and kept it very original. If you ever have a blade come loose put a small thin stainless flat washer on the opposite side after the rivit sticks thru the blade. You have to hold it snug while you squeeze the pop rivet on. Then you have a small flange on both sides of the pop rivet squeezing the blade in between FWIW. Also If you ever want to unscrew the legs in the future all you have to do was heat up the casting with your torch the legs will easily unscrew then. I have taken out more broken bolts and pipes etc with torches than you could ever believe. I learned from a guy with a muffler shop who was doing broken and rusted to death exhaust bolts on cylinder heads. Nice job !
On "refractory" to line the pan- I have used "fire brick" but I am told they make a "cement" that will handle the heat. I was told that by the place that sold me fire-brick, but it is $90 for 10lbs or something like that. I'm no expert. Thanks VERY much for sharing. I am about to tackle a very similar project. Thanks again and NICE job.
Sir, you did a excellent job on this restoration.
Thank you
The brown can on the crank bearing housing is a grease fitting. You pack it full with bearing grease, screw the lid on just a few turns and as needed you can screw down some more to have some of the grease end up inside the bearing housing...You may need to repack the can a few times to fill the inner housing completely with grease...
just gonna type that. had some of those fittings on a wood mill.
I was wondering about that.
Amen to that about the greave cap.
Ya I didn't know that until posting this video, but it's an easy fix! Thanks for letting me know!
It's what they used before grease zerks were invented. Most people call them grease cups. They have another style with a t handled screw with a plunger in the lid. You screw the cap on and give the t handle a twist to inject the grease.
www.oldmarineengine.com/discus/messages/5/102469.html
This is the first restoration / repair video that shows cracks in cast iron being drilled before the repair. I’ve been complaining for years! I actually showed this video to my 9 year old, praising the technique. Great job and thank you for doing it right!
Мобильный горн! Впервые вижу! Вещь просто уникальная, при том что КПД просто восторгает........... Лайк на все 100%. Оно стоило того!!!...................Я бы на него пристроил на две ножки колеса небольшие с поворотным механизмом, подобно как у торговой тележки и рукоять для перемещения, тогда не пришлось бы его поднимать на пупа.............................
This was definitely a very difficult restoration. I admire your tenacity
OMG! ALL THE PUPPERS!!!!!! Breaks for Petz appreciated. :)
It really is great that you saved this forge. It's not something that you see that often. Thanks.
I love that no mater what he takes the time to love on the fur babies 🐕
They are pretty awesome dogs!! You'll see lots more of them in future videos!!
That machine was originally engineered to be lubricated with plain lard.
The cup at the top is made so that the highly viscous animal fat will very slowly creep down over time, and the cotton packing in the lower bearings is there to hold it in place when it gets warm enough by the heat of the forge to want to liquefy, because it will hold to the cotton like a candle wick and that ensures it remains lubricated even at high temps.
Actually that big hollow cap would have held a lot of fat and been cranked down a quarter to half turn each day to squeeze a little into the bearing.
@@GordieGii Only if it was too cold for the lard to flow on its own would you need to do that.
Also, unless those threads were super accurate and tightly fitting, the grease would just as easily squeeze out onto your hands as into the little hole and onto the axle shaft, so in all likelihood, the melting fat relying on a slow bubble displacement drip would be far less messy in the long run.
@@DeliciousDeBlair I've seen that type of grease applicator on many steam engines. Obviously you wouldn't need to screw it down in a super hot application like a forge, but that is how it is used in many applications and why the cap is so deep with such fine threads. You smear the grease into the cap and then thread it onto the base until you meet resistance, and then a little more each day. I've heard it described in greater or lesser detail by stationary engineers and others at many steam shows and museums.
@@DeliciousDeBlair The threads don't need to be that tight. They are very fine and the channel the grease would have to flow through would be very long. (many times around the base) The hole to the bearing would still have a lot less resistance. Also I don't think a blacksmith would worry about getting a little grease on his (or her) hands.
You tubes comments are cancer on subjects like this.... op is correct ..
Also, I really like the spotlight of older restorations!
As you can see, I don't just restore these tools and machines for the views! I want to put these old beasts back to work! As always, thanks for watching!
I wish all TH-cam channels made videos exactly as you do. No BS, great editing, mix of FF and real time, and once again, no BS.
You are my kind of man , I deal in rust on old tools so I understand the feeling when working on such things . I love what you did . you bring thing from the past back from the grave , Very Good'' fill your caps with grease and screw them down a half turn when you when you need to grease the shafts . thanks for showing this . I just love this type of things .
Good job on the restoration so many things are disappearing in our lives today! Keep up the good work 👍👍🤠🇺🇸
WOW, your cast iron welding skills are definitely pro level work.
It's been decades since I did it and it always drove me nuts with how patient you have to be when you do it.
I am a ‘jack of all trades’ and I watch your videos all the time.
Keep restoring.
I am very happy someone with talent like you have ended up as the custodian of this historic tool! The condition it was in with all the extremely difficult to repair breaks and cracks would almost have a death sentence had you not found it!
Great job, and thank you for your work!
It's always good to see you work..
Man brilliant and very nice job..
Thanks for demoing it! That makes it even more interesting! And one is so curious to see what exactly it does since I had never seen one before!
Showing what it was used for was the best part!
We miss You on TH-cam.
Youre a good person , You love dogs ❤️. And your videos are the best. please come back to us
I was given a rivet forge with a champion blower and had to give it the same treatment. It had been a piece of yard art for many years in yucaipa california. It has been a good companion over the years of me owning it. I'm proud to own a piece of history. Good thorough job sir.
I've got my great grandfather's, need to restore it. Great video
Treasure it as it's family history.
Might look into electrolysis for big projects like this. I have had it save me a few hours on large piece restorations and overall rust removal. Also saves a bit of cash on Rust remover. Kiddie pool from box store. Scrap steel from the shop. Helps get those big pieces in one go while you work on other tasks in shop. Great rebuild. I would be proud to have that in my shop.
Nice to see that Champion back in action. That bandsaw and jointer, Oh My!
The Bandsaw and Jointer have a big brother, a MASSIVE planer! Watch my shop tour and you'll see it!
Beautiful restoration job. It's good to see it put back into service.
Ok, I just finished the video, and I was definitely right! All of your restorations are so complete from start to finish and they include anything and everything a viewer could desire from a video!
I can't stand when videos don't show you at least part of each step throughout the full process!
Those are grease cups/fittings - not for oil. The heat will dissipate the oil and dry your bearings. That chain looks a bit tight, maybe there's an adjustment. Great job, as always!
Thanks for letting me know... there is not an adjustment on the chain, but it's working well now!
The sights, sounds and smell coming from a blacksmith's shop is music to my soul. Thanks for sharing the restoration. Take care.
I'm glad you enjoyed it!
What a brilliant bit of kit & a fab restoration job you did on it. It is this kind of video that makes TH-cam so great. Love the dogs as well.
This is awesome. Great job. Thanks for sharing
That is one neat restoration ...and usable ..hope it brings you a lifetime of use...
I get odderly satisfied by watching rust removal... when i saw that big piece of rust, I knew I had to see this film - can you imagine my dissapointment when the removal part was two buckets and 30 seconds...
Mesmerising. Thank you so much for such a chill out video. Fantastic job on the forge, and love your dogs too.
Holy cow those are some beautiful dogs man, the grey one reminds me of an albino great dane that used to live in my old neighborhood named Pinky. She was such a good dog.
That is great! What a ton of work on this one.
The dog stole the show, super job 100%
I was wondering how 1890s people were forging back then . Thank you for uploading this.
Вот ЭТО -- настоящее восстановление!!! А не прочее -- разобрал,прочистил,смазал и вперёд. Тут и разогрев,сварка (одно ушко на кожухе -- это высший класс!),юстировка,смазка -- ну и пёсиков как то занять-отогнать,что бы не мешали.
Кароч -- не знаю что это за механизм,думаю старики просто так металл плавить не стали бы -- но этот паря -- сделал всё как надо -- чесьь ему и хвала!
Одно не пойму -- где такие относительно сохранившиеся механизмы ещё е?
Как говорил Жванецкий -- кибернетика,электроника ! -- а голова на что?! Черепок?!
Согласен, очень технологичный мастер, прям приятно смотреть 👍
Переносной кузнечный гон.
Nice work. If you are actually going to use it for forging, you should “clay” the pan. Add a layer or clay/ dirt/ kitty litter/ refectory cement to the pan. It should come up to almost the top of the pan and dish or bowl down to the clinker breaker. This will all for a firepot effect to contain you fire, move the fire up to were you can slide longer pieces into it and, most importantly, protect your pan from fast thermal cycles and keep it from cracking!
I totally agree! I already have the refractory cement that I plan to line the forge pan with!
You have made my day. We spent some time in Lancaster Pa. and I watched a blacksmith making horse shoes back in about 1983. Who knows, he may have used that same forge. Great job of resto. Thanks fo the journey.
Glad you saved the chain. That was the coolest part of the restoration.
You have a Truly Righteous shop, I can only hope to have one like that someday.
Thank you my friend! It's a fun place to work!
Why do I find these videos so relaxing?
I don't exactly know, but I love watching tons of restorations as well!! Something cool about bringing old tools and machines back to life!!
I like them because somebody else is getting their hands dirty instead of me! Lol
I love Weimaraners, had two. Smartest dingbat on the planet. LOL. Dopey, but lovable! Hehe
I'm a retired blacksmith and have done some restos of my own. Good video.
You are a good dog dad. Thanks for sharing this video. My dad had something similar that he converted into a family barbecue. Great way to get charcoal embers glowing. Like Huck Fin it was easy to find kids (usually me) to turn the crank for a few minutes... Make each day great.
yea... that crank became a solid piece
also, that ugh when that screw snapped off! ☺
Yes it did! I'm glad you felt my pain!
Hi bro 👋👋👋very good restoration blacksmith forge 👍👍👍 the work has been done splendidly 🤝🤝🤝
WOW! Very nice job on that old coal forge! It turned out fantastic. Makes me want to go and find me an old forge like that so I can do the same thing.
You did a wonderful job on that machine.
OMG I did not think you were going to get that chain off good job man.... That was fun to watch.. :)
I knew it was coming Off, but I thought to myself "if i can't get the chain WORKING again, this project won't get finished!" I had my doubts, but I'm glad I could save it!
huh, never thought i'd see a turbo charged stationary wheel barrel
Lol.. Now you HAVE!
@@SalvageWorkshop Really more like a super-charger/blower, yes?? Now drive some turbos off an old BBQ lid and recycle the heat from the forge to superheat it... Turbos ;D ...
Fan versus compressor. Not the same.
A racing grill
Someone should run that idea past Colin Furze
I'm glad someone has the patience to do all this work to restore old machines and tools. I love watching it and using them but I would never have the patience to restore them.
You Sir are a Genius! I've learned so much from your Restorations, I still do. Thanks for that.
Greetings from Germany and keep up that great Work! 😊👍
Wow, what a project. I love antique tools because of practicality and longevity. And I think they are much better looking vthan plastic anyday. As rusty as it was the iron is thick was real solid back then without making it so thin that they rusted thru in 10 years. Manufacturers took great pride in making a quality tool up until the 1960s when plastics came in use. Now everything is disposable. Great video. I'm no expert but shouldn't you have put grease into bearing housing? Personally, I would have gone back to all black, but that is my taste. It came out very nice.thanks.
Still have my grandpa's 60's steel craftsman drill and Yankee screwdriver. Both work perfectly
I haven't watched the whole video yet but it could be a Babbot bearing, they were and still are common bearings, and some of the best bearings they don't use grease
Really enjoyed the restoration. I would however advise a 1/2” layer of Mizzou or some other hard refractory so it doesn’t crack again. Most old rivet forges had line with clay before use stamped right in the casting.⚒🔥⚒🔥👊🏻
I loved in Harris burg pa for twelve years. All sorts of goodies from champion. And others out there to be found. Great work man.
One final sentence to type to you. Before there were grease fittings, they had those components that held grease in them. That's what the component you turned onto the one you tightened into the hole of that forge. Whenever that bearing needs to be lubricated, all you need to do is turn that upper cup, which was previously filled with grease it's pushed into the area surrounding the shaft that needs to be lubricated. I know this because when I was living on the farm on the eastern side of Welland, my father had a large saw. It had two of them. That large diameter blade was perhaps more than three feet wide that was driven by a belt that went to the PTO pulley. I had so much fun on that farm.
I love that your clamp says "clamp" on the side.
How would you know what it was otherwise?
@@SalvageWorkshop A damn fine point, that.
Where are the steaks? That would make a great BBQ. I love how you restore old tools. Keep up the good work. Tim
Outstanding restoration! The dogs were a nice plus ;-). Great to see an old piece of history put back to work. It will give you many more years of service.
Nice to see brazing used. Great job. Looking forward to the band saw restoration.
You're a braver man than me, cast iron is notoriously brittle, I'm surprised how few "break offs" you had!
if he would have used heat he would most likely of had no breakage at all
Craftsmanship 100% 👍🏻
Great video, loved it
Wonderful! I'm glad you enjoyed it!
Good restore. I also love that jointer against the wooden fence. Would love to see that baby brought back to life.
Thank you! That jointer will get restored here on the channel at some point! I appreciate you watching and commenting! Lots more to come!
Everyone needs a forge if your going to do some metal work. What a nice addition to someones dream.... Well done!
18:34 immediately got a little Jimmy DiResta feel for a second 👍
He has those awesome little hands that can grab stuff!!
Your personal craftsmanship is great and your ability to educate along the way is excellent....pet the dogs for me. Thanks from Kauai!
Thank you my friend!! I'm glad you enjoyed the video! Lots more to come from the workshop!
What a wonderful blacksmith shop you have made with your hard work! Those four dogs sure love it!
Way to that forge back to life!! Great looking pups too!!
Loved it when he snapped that little screw and went ooooh! That’s reality .
Yup... That's just how it goes sometimes! And that's why I don't cut those moments out of the videos!
When I start my forge,I ball up news paper and cover that with coal, light the paper, turn the crank to give it air and off we go. Try it.
I will do that! Thanks for the suggestion!
Exactly how my great grandpa did it
I found this so interesting as my great grandfather was a blacksmith in the early 1900s and would probably have used something like this,thanks.
Loves me the old square nuts and bolts. Stuff from that period just looks so damn nice.
Second time I watch your video, still beautiful :-)
@Mack Carl 9
Brilliant job! Subscribed 👍 Would love to eventually have a forge and anvil etc
A journey of a thousand miles begins with a step.
Great restoration, not only making it look nice again but also workable, well done, very very interesting.
Yes ,that screw down cap is, I'm sure, is for grease, as used on all or most early motorcars for chassis lubrication etc.
Multiple skills coming together to save a little bit of history, many thanks sir.
Excellent video, I would give almost anything to own a forge like that. What a fantastic job of restoring it.
Brilliant job mate. Too many happy dogs always helps any work.
Lucky find! I've been searching for a decent forge like this for the past 10 years. I used to see them all the time as a kid. Every antique shop had one in decent shape for under a hundred bucks. Seems like nowadays they all either have major missing parts, holes rusted through the pan, or the seller wants $1000.
They are out there! I'm glad to have this one, and can't wait to put it to work!
Forged in Fire built an interest. Anvils and forges went way up.
Seeing you with your dogs makes me a happy man.
What a beautiful forge. I have an old hand crank one but it’s round and half that size and has no chain just a gearbox directly attached the the blower. I know little about it except it was well loved and taken care of.
All the best to you and yours!
Impressive, I like how they upgraded it with the chain, you should upgrade it with a small electric motor! Not sure about the refractory lining for it, that's no my expertise. Definitely love how the end result turned out, great job!
@Phill Moxham I agree the term restoration is restoring a item to its original state if he was going to do that a more accurate title would be restoration/modification
Clearly neither of you are blacksmiths. Coal forged duck compared to oxy propane burners anyway and this was already modded. As a person whose a blacks moth and as a person who live d a ten min drive from where this was made I say less talk more hammering ;)
@@joshschneider9766 , Totally agree! If it were a ground up restore he wouldn't have used hex nuts on reassembly. It was a hand me down that had been modified to do a job! Get on with it!
@@jamieminton172 yeah I got alot of flack for putting hand forged parts on a 1906 Harley and I toldem if there's a completely perfect restoration in a museum which there is of all Harley's that year and almost everything this company made history is preserved and it's fair game. Got death threats over that lmao
Your Braze welding can only be described as( oh bless his heart for trying)
Excellent. That old forge is now happy with a new lease on life.
Thank you so much for saving this beautiful piece of history🙏
I would love to see that planer being restored
At some point you will!
Handsome Weimaraners. Can't wait to see the bandsaw.
That will be an awesome project! I can't wait either!
My friend you are the hardest working man I've seen in the last 20 years thank you for your work ethic it fun to watch You. Take care friend
I remember learning how to hammer weld using a forge like this many years ago.
Some points I wanted to mention.... Unless you are using sand or clay that has been dried in an oven or in a pot over a fire, there is too much moisture in the material to use it for slow cooling of a cast iron part. If the sand or clay is the least bit moist, you are actually helping fast cool what ever you are putting into it. Another point, you are not using enough preheat and heat in general to braze. You could have heated up that forge pan with a fire for a few hours before it would even be close to the temperature for brazing. Basically if the whole part (or the majority of the part) being brazed is not red hot, the cooler areas of the part will wick heat away from the brazing zone and quench, so to speak, the area of the braze. I can't hear the flame, but it looks like your tip is too small. You can cheat on preheat by brazing with the cutting tip or sometimes even the rosebud tip. Yes I have done this sometimes when I could not get enough preheat or was too lazy to wait. And to also say, with this brazing that you are doing, this slow cooling in clay or sand or whatever is not really necessary. Slow cooling is really important when welding with an electric arc. The electric arc has about TWICE the temperature as oxy-acetylene brazing. Not as much heat, but twice the temperature in degrees. This is important because brazing does not get the always high-carbon content iron to a high enough localized temperature to make it hard and thus brittle. Not like electric arc welding does. So unless you are arc welding cast iron, and you have done the proper preheat and thus want a slow cool, no need to slow cool brazing with dry sand. And I suspect if you are using wet sand with trying to slow cool your braze, you are neither helping nor hurting anything. Just not needed and if it was needed, to be effective at slow cooling, it must be super dry.
I have been a tool and die maker and a machinist all my life, and you definitely know exactly what you are talking. And not just talking crap you are a very skilled professional even if you don't do this for a job
Прекрасное знание своей работы вы молодец
8:13 that sound everyone makes when you drop toast on the floor
I love the action with the finger that sets up the little piece !! 😎
Good job 👍
He ain't only one restored this forge legendry