I can imagine going in through the LCD cable hole and pulling the motor connector off the board and since it's long enough pulling it through the hole and applying a voltage.
You can pick a cross lock without a specialized tool, I’ve done it before. The specialized tool just makes it easier to pick. You can apply tension to one of the sides and pick from there.
But I don't think it would be that easy to pick this one, simply because you need some force to open this lock. Picking & applying force.. hmm.. Never tried though.
@@hermannschaefer4777 that’s kind of the basis of picking locks, you can pick it then you can put in a flat blade screwdriver to apply the torque need to actuate the mechanism
I like this '70s style old school flatworm cable. Hope it's protected from moving parts. Key override is always a good thing on those electronic jobbies... And now try doing it once again just to see if it was not a Fluke.
The mass of those two heavy pins is bearing on that plastic pin on the motor shaft. I wonder if a bunch of hammer blows would impart enough inertia on those heavy pins to eventually shear off that pin?
7:50 Just take some 1/8" rod and bend it 90 degrees, 2" from the end, insert it through the slot pointing downwards and reach behind the rod, then give it a hard punch. It will bend the rod inwards which pulls the bolts back.
Burg Wächter is an old company and is supposed to be one of the better brands when it comes to locks and similar security items. But well, they certainly have cheap stuff for a bargain, just to sell more in DIY stores. Their "better" safes (for offices and such) cost some thousand Euros and up.
Introduce some gallium via the coathanger lol, wonder if you can make the arm brittle enough to break by dropping then give it another turn with another coathanger. Still, you'd need gallium and two coathangers... Perhaps analyse the thing with a scope just in case there's something interesting happening
What about smashing the linkage between the lock cylinder and motor carriage? It seems as this could be done through the flex hole. That could potentially slide the motor carriage and retract the bolts.
My one is welded from some tread plate 6mm. Then a door the same and a cheap 6 lever lock. Yes you can break in but takes time to do so which is the important thing. Use the bolts and use bottom and rear art a minimum for this with m8 rawl bolts at a minimum. Then you can go better.
@@Shit_I_Missed. oh it was thought through: fire. The straw of a spray can of keyboard duster will fit and is flammable. To get the fire started inside you could inject some ethanol that you set on fire. The keyboard duster would then act as a flame thrower.
@@bertblankenstein3738 not things like gold and diamonds. And the locking mechanism is in an enclosure and has a steel door. So it would take some heat to penetrate into the safe itself and the door would act like a heat sink.
Still alive, and the only platform that still actively imports TH-cam videos automatically. Rumble and Playeur have both failed in thsi regard. Odysee was recently auctioned off, no idea who if anyone bought it.
We do have one of these in our company to lock in some of the lower security stuff over night. it works, but we had some troubles with the electronics though. as far as i remember, the electronic control has a master key (that cannot be changed?) and will unlock the safe every time and then you can also programm one user key. the user key is erased and has to be programmed again if you use the master key. on some occasions we were unable to open the safe in the morning because of an invalid user code. we then have to get the master code and reset the device. we do not know why this happens, there are two possible scenarios. if the safe was opened with the user code, you usually hold the door closed by hand then press the close button on the keypad, it will lock. but if the safe is open and you enter another code in the open state (or just hit the buttons by accident), this will programm a new user code. in this scenario, someone might accidentially or with malicious intend have changed the code while the safe was open and then locked it. the other scenario would be memory corruption. when you enter the master code, the display will show you the current user code before resetting it. in these cases, when the user code did not work anymore, it was usually only one digit that was off. but we also had one case where the code was just 11. it is usually 6 digits. i have seen the option to enter a new user code every time it is open in hotel safes, so the guest can lock it up with a custom code, maybe that is the same intend here. TL;DR the electronic lock is not the best or user friendly.
This is not the kind of safe you get to put lots of money or very espensive jewelry in. Compared to other safes in the same price class it looks decent and will probably keep stuff safe from a random burglar with a pry bar if anchored properly! Good to keep some things safe from other family members and anyone that has access to your home, or any values less than 3000-5000 euros from the casual/random thief.
I can imagine going in through the LCD cable hole and pulling the motor connector off the board and since it's long enough pulling it through the hole and applying a voltage.
Burg = castle ; Wächter= guardian - So "castle guardian"
Nein! Bird Watcher!
@@LawpickingLocksmith Well hey, without my glasses I thought I was going to see a bug washer...
Its Burg Wächter the "ä" is important and pronounced like a in "can". Translated it would be Castle guard, makes more sens, huh?
You can pick a cross lock without a specialized tool, I’ve done it before. The specialized tool just makes it easier to pick. You can apply tension to one of the sides and pick from there.
But I don't think it would be that easy to pick this one, simply because you need some force to open this lock. Picking & applying force.. hmm.. Never tried though.
It would not be a quick pick as you may need to pick it for every quarter turn.
@@bertblankenstein3738 true
@@hermannschaefer4777 that’s kind of the basis of picking locks, you can pick it then you can put in a flat blade screwdriver to apply the torque need to actuate the mechanism
I like this '70s style old school flatworm cable. Hope it's protected from moving parts.
Key override is always a good thing on those electronic jobbies... And now try doing it once again just to see if it was not a Fluke.
In Dave;s case it is not a Brymen?
@@LawpickingLocksmith fair point :D
LOCK PICKING LAWYER:
Hold my beer.......
The mass of those two heavy pins is bearing on that plastic pin on the motor shaft. I wonder if a bunch of hammer blows would impart enough inertia on those heavy pins to eventually shear off that pin?
7:50 Just take some 1/8" rod and bend it 90 degrees, 2" from the end, insert it through the slot pointing downwards and reach behind the rod, then give it a hard punch. It will bend the rod inwards which pulls the bolts back.
Very cool.
What was the purpose of the hole punched in the plate with the metal folded up? Was that where the cables for the front panel passed through?
Burg Wächter is an old company and is supposed to be one of the better brands when it comes to locks and similar security items. But well, they certainly have cheap stuff for a bargain, just to sell more in DIY stores. Their "better" safes (for offices and such) cost some thousand Euros and up.
Introduce some gallium via the coathanger lol, wonder if you can make the arm brittle enough to break by dropping then give it another turn with another coathanger. Still, you'd need gallium and two coathangers...
Perhaps analyse the thing with a scope just in case there's something interesting happening
The arm is steel. I thought gallium attacks only worked on aluminum or magnesium?
What about smashing the linkage between the lock cylinder and motor carriage? It seems as this could be done through the flex hole. That could potentially slide the motor carriage and retract the bolts.
My one is welded from some tread plate 6mm. Then a door the same and a cheap 6 lever lock. Yes you can break in but takes time to do so which is the important thing. Use the bolts and use bottom and rear art a minimum for this with m8 rawl bolts at a minimum. Then you can go better.
I would trust it in my hotel room for my passport, no worries. That's the market for these saves
An angle grinder with a slitting disc will take care of the tiny hinge pins.
What if you were to melt the plastic wheel with the pin on it? Then you could probably do the magnetic attack.
I don't think you fully thought this through. How do you gain access to the plastic cam?
@@Shit_I_Missed. oh it was thought through: fire. The straw of a spray can of keyboard duster will fit and is flammable. To get the fire started inside you could inject some ethanol that you set on fire. The keyboard duster would then act as a flame thrower.
@@Shit_I_Missed.
Wire through the slot, then heat the wire with current.
Would the fire potentially damage the safe contents?
@@bertblankenstein3738 not things like gold and diamonds. And the locking mechanism is in an enclosure and has a steel door. So it would take some heat to penetrate into the safe itself and the door would act like a heat sink.
What about using a coat hanger to rotate the crank? This would not work if the motor has a worm gear...
That safe and similar safes of that type and size are just junk when they are brand new. How do I know? Been in the safecracking trade for 40 years.
How is Odysee doing? Is it dead already?
nope, still alive
Still alive, and the only platform that still actively imports TH-cam videos automatically. Rumble and Playeur have both failed in thsi regard. Odysee was recently auctioned off, no idea who if anyone bought it.
Better quality than most. OPE (4:27) is obviously German for open, or am I missing somethiNg, even a small n would be nice.
How hard would it have been to ask Google to translate and spell?
And pronounce!
Watcher? It says Wachter. How would you ever pronounce that as watcher? (unless you have dyslexia).
It looks like Zeizz icon key.
Please do a video on trying to break into it. I reckon that motor wiring is a potential vulnerability.
We do have one of these in our company to lock in some of the lower security stuff over night. it works, but we had some troubles with the electronics though. as far as i remember, the electronic control has a master key (that cannot be changed?) and will unlock the safe every time and then you can also programm one user key. the user key is erased and has to be programmed again if you use the master key. on some occasions we were unable to open the safe in the morning because of an invalid user code. we then have to get the master code and reset the device. we do not know why this happens, there are two possible scenarios. if the safe was opened with the user code, you usually hold the door closed by hand then press the close button on the keypad, it will lock. but if the safe is open and you enter another code in the open state (or just hit the buttons by accident), this will programm a new user code. in this scenario, someone might accidentially or with malicious intend have changed the code while the safe was open and then locked it. the other scenario would be memory corruption. when you enter the master code, the display will show you the current user code before resetting it. in these cases, when the user code did not work anymore, it was usually only one digit that was off. but we also had one case where the code was just 11. it is usually 6 digits. i have seen the option to enter a new user code every time it is open in hotel safes, so the guest can lock it up with a custom code, maybe that is the same intend here. TL;DR the electronic lock is not the best or user friendly.
Such a Safe is enough if you just want to be sure, that your kids have no access to the things inside. Like the keys for the car, or so.
This is not the kind of safe you get to put lots of money or very espensive jewelry in.
Compared to other safes in the same price class it looks decent and will probably keep stuff safe from a random burglar with a pry bar if anchored properly!
Good to keep some things safe from other family members and anyone that has access to your home, or any values less than 3000-5000 euros from the casual/random thief.
🖐
I don't like the look of that Nylon cam wheel. If that pin breaks off you are in for a whole lot of agro!
Shaped charge
LPL will have this open under 3.14 seconds 😆
drop attack would work
its called: burg wächter, hoden... hat nichts mit watching am hut