This video has an amazing title that contains a lot of information yet for most of the population it looks like a random set of letters and numbers. I love it.
I bought a bullseye lnb to be used on ku satellite for tv channels which should arrive in a few days but later i learned it needs a power injector to work! !! Because in the seller's description it says Requires a 12-19V bias tee power injector, . 11.5 - 14V enables vertical polarization and 16 - 19V enables horizontal polarization. I can't find this power injector to buy! !! I've looked for days and I can't find it because I bought this lnb to gift my brother! !
Your satellite receiver with provide the power for the LNB, and will set correct voltage for vertical or horizontal. You only need a Bias Tee if you are not using a dedicated sat receiver.
Just get one... Yes, really stable. With other 6 LNBs I gave I was able to receive QO100 just on 2 pcs with close to not acceptable sound quality and frequency stabilization. The only one issue I had - i need new 3D print for helical 2.4GHz uplink antenna as Bulleye is 61mm inndiameter.
Mine is going up this week but I'll need an adapter for my old Sky Minidish arm, as the bracket is too small. Booo! Pointing the LNB vaguely in the direction of QO by hand yields some signals, including some discernible SSB! I'm excited to get this going...
my lnb will arrive tomorrow!!! when I use it, do I just need to use green to watch TV channels? ?? does the red go unused? ?? for tv channels is bullseye lnb stable and better than a common lnb? ????
Interesting but you didn't show the drift or lack of during 10 mins like with the octagon but guess there wasn't any? Hoping this will be good enough to use with my Octagon SF8008 for video on qo100. Any idea of price?
This lnb does exactly what it says but it is much better. Frequency accuracy is astoundingly good. How. Is this possible? 10 KHz is 1ppm at 10G and most pll lnb are 30ppm. Older DRO are 300ppm.. Other high stability lnb without reference output are 300USD or more? How is this done?
I also beleive that this is the only lnb in the world where you can digitally tune it via the reference port and store the offset in memory within the lnb. So any long term drift can be corrected. Just heard this but don't know if it's a reality
How easy is it to fit this as a bare, uncased LNB into a POTY patch of the year - the standard dual band antenna for QO-100? This usually means removing the horn and fitting it in a diameter 22 mm plumbing union. 73 de M0YDH.
Can I buy the LNB from a European dealer? If I understood correctly, the 25 Mhz output can be used as kind of a GPS Timeconstant to use on an SDR. Thanks for the nice video!
You’re welcome! I did hear that they were going to be selling from fulfilment centres around the world, maybe try your countries Amazon site? I do know they ship world wide from their website and it doesn’t take too long to arrive.
@@TechMindsOfficial amazon uk has it, also some ebay sellers and aliexpress. after i get mine i will order one from ali and do a teardown and compare video to show if they are the same or a sweatshop kid is getting cheap dro lnb and colouring it red with felt tip pens
Sorry guys, but I am lost. What does 'RSP' mean? I downloaded the program, but none of the features on the top panel or the side panel are on the program. What am I missing? I have the 'Airspy R2 High Performance SDR Receiver' and the Bullseye 10KHz LNB. Am I doing something wrong? I need help and assistance.
Well the LNB is actually a down converter, 10GHz roughly down to 739MHz. You can purchase further down converters so you can use a standard 144mhz radio to listen.
adapt your receiver to use the 25mhz signal as its own clock so both lnb and receiver act as a single synced unit. the 25 mhz can be put through a frequency divider or as an input to a digital frequency synthesiser. i myself am interested in disconnecting it and adding a synth clock source as lnb input so i can maybe bring the IF frequency down even lower.
@@TechMindsOfficial Thanks - no before you show the BullsEye, you show the Octagon, with a different IF, and to demonstrate the drift. It has a low band bottom of 10.7HGz, and I'm wondering if you're able to receive QO-100, at 10.4, on that LNB, without modifications. I'm just trying it out, on a similar LNB, without much success.
maybe i'm a bit confused but a frequency stability of +/- 10,000 Hz doesn't sound that impressive to me, I used to work in calibration and typically measured frequency stability in usually just a couple parts per million.
This video has an amazing title that contains a lot of information yet for most of the population it looks like a random set of letters and numbers. I love it.
Thanks dude!
the bullseye lnb is also ultra stable for tv channels ????
@@thyggus You don't need an ultra stable lnb for TV as you're using much greater bandwdth signals.
@@OC35 in my country when it rains hard the tv channels are without signal!! with this lnb I will have more stability???
I bought a bullseye lnb to be used on ku satellite for tv channels which should arrive in a few days but later i learned it needs a power injector to work! !! Because in the seller's description it says Requires a 12-19V bias tee power injector, . 11.5 - 14V enables vertical polarization and 16 - 19V enables horizontal polarization. I can't find this power injector to buy! !! I've looked for days and I can't find it because I bought this lnb to gift my brother! !
Your satellite receiver with provide the power for the LNB, and will set correct voltage for vertical or horizontal. You only need a Bias Tee if you are not using a dedicated sat receiver.
@@TechMindsOfficial thanks friend
Just get one... Yes, really stable. With other 6 LNBs I gave I was able to receive QO100 just on 2 pcs with close to not acceptable sound quality and frequency stabilization. The only one issue I had - i need new 3D print for helical 2.4GHz uplink antenna as Bulleye is 61mm inndiameter.
Mine is going up this week but I'll need an adapter for my old Sky Minidish arm, as the bracket is too small. Booo!
Pointing the LNB vaguely in the direction of QO by hand yields some signals, including some discernible SSB! I'm excited to get this going...
my lnb will arrive tomorrow!!! when I use it, do I just need to use green to watch TV channels? ?? does the red go unused? ?? for tv channels is bullseye lnb stable and better than a common lnb? ????
I hope you'll make a video series about communicating qo-100.
It will be nice if you explain how to decode beacons of es'hail 2 for begginers.
Interesting but you didn't show the drift or lack of during 10 mins like with the octagon but guess there wasn't any? Hoping this will be good enough to use with my Octagon SF8008 for video on qo100. Any idea of price?
the bullseye lnb is also ultra stable for tv channels ????
TNX 73!
This lnb does exactly what it says but it is much better. Frequency accuracy is astoundingly good. How. Is this possible?
10 KHz is 1ppm at 10G and most pll lnb are 30ppm. Older DRO are 300ppm..
Other high stability lnb without reference output are 300USD or more? How is this done?
I also beleive that this is the only lnb in the world where you can digitally tune it via the reference port and store the offset in memory within the lnb. So any long term drift can be corrected.
Just heard this but don't know if it's a reality
@@jonwalker8999 any source info for this? it could be useful
the bullseye lnb is also ultra stable for tv channels ????
@@jonwalker8999 the bullseye lnb is also ultra stable for tv channels ????
@@noimnotarobotcanubeleiveit7024 the bullseye lnb is also ultra stable for tv channels ????
How easy is it to fit this as a bare, uncased LNB into a POTY patch of the year - the standard dual band antenna for QO-100? This usually means removing the horn and fitting it in a diameter 22 mm plumbing union. 73 de M0YDH.
I’ve just ordered a poty from passion radio so as soon as it arrives I will be attaching it to this LNB. I’ll create a video on it to show progress :)
What Bias tee do you recommend between the LNB and Sdrplay Rspdx ?
I just got one -- is the BiasT is enough to power it, and I don't need to get an LNB injector (which are usually higher voltage?)
Normally at least 12v for vertical and 18v for horizontal. If if your bias T is enough, that’s great work!
the bullseye lnb is also ultra stable for tv channels ????
these green and red inputs are for use on 2 receivers? ??
No, one is a 25mhz ref oscillator
Great demo! Next time try tuning on some of the 25MHz harmonics to get a better look at the drift. KEEP those videos coming ! 73 N8AUM
I have both a SDR Play RSP DX and a Adalm Pluto SDR for DATV Reception! And also To Listen to My Local Police Dispatch Frequencies!
i that case you are american and the chance of using this lnb and pluto to get qo100 is zero unless you drill a really deep hole
the bullseye lnb is also ultra stable for tv channels ????
It would help if I knew what an LNB was...
It’s the part that goes on the end of a Satellite Dish Arm.
Low Noise Blocker
Low Noise Block
Low noise block down converter. Receives amplifies and down shifts the frequencies to use a common coax cable to the receiver.
Can I buy the LNB from a European dealer? If I understood correctly, the 25 Mhz output can be used as kind of a GPS Timeconstant to use on an SDR. Thanks for the nice video!
You’re welcome! I did hear that they were going to be selling from fulfilment centres around the world, maybe try your countries Amazon site? I do know they ship world wide from their website and it doesn’t take too long to arrive.
@@TechMindsOfficial Just found a selling point in France. Still no Amazon sales in Europe at this moment. Was I correct with my 25 mHz output vision?
@@TechMindsOfficial amazon uk has it, also some ebay sellers and aliexpress. after i get mine i will order one from ali and do a teardown and compare video to show if they are the same or a sweatshop kid is getting cheap dro lnb and colouring it red with felt tip pens
the bullseye lnb is also ultra stable for tv channels ????
@@SDR-DXobserver the bullseye lnb is also ultra stable for tv channels ????
do i use the green or red for the ku satellite ??? is it universal? ?
Green
Sorry guys, but I am lost. What does 'RSP' mean? I downloaded the program, but none of the features on the top panel or the side panel are on the program. What am I missing? I have the 'Airspy R2 High Performance SDR Receiver' and the Bullseye 10KHz LNB. Am I doing something wrong? I need help and assistance.
the bullseye lnb is also ultra stable for tv channels ????
can the green also be used to go to a up convertor on 144mhz or is it just for sdr 739mhz?
Well the LNB is actually a down converter, 10GHz roughly down to 739MHz. You can purchase further down converters so you can use a standard 144mhz radio to listen.
can you explain how to use 25 MHz clock reference to correct frequency drift ?
adapt your receiver to use the 25mhz signal as its own clock so both lnb and receiver act as a single synced unit. the 25 mhz can be put through a frequency divider or as an input to a digital frequency synthesiser.
i myself am interested in disconnecting it and adding a synth clock source as lnb input so i can maybe bring the IF frequency down even lower.
the bullseye lnb is also ultra stable for tv channels ????
Did you use a stock Octagon, (10.7 bottom band) or how did you manage to get the 10.4 receive to work on that LNB?
Not sure what you mean, but I’m using the BullsEye and that gives 739.500 IF output with QO-100.
@@TechMindsOfficial Thanks - no before you show the BullsEye, you show the Octagon, with a different IF, and to demonstrate the drift. It has a low band bottom of 10.7HGz, and I'm wondering if you're able to receive QO-100, at 10.4, on that LNB, without modifications. I'm just trying it out, on a similar LNB, without much success.
the bullseye lnb is also ultra stable for tv channels ????
@@thyggus you posted this comment how many tiimes?
mines on its way! but is it going to be ok on a 2.2m prime focus? will i need scalar rings? can it coexist with a c band lnb?
the bullseye lnb is also ultra stable for tv channels ????
Can it be fed an 0.1ppm ocxo in the same port it feeds out the 25MHz signal?
Don’t think so, not without modification.
also thinking of this mod. i want a vfo synth IF
the bullseye lnb is also ultra stable for tv channels ????
With modification
What bias tee do you use? Thanks!
I can’t remember the name of it but if you look at my Pluto QO-100 video there is a link to a parts list in the description :) thanks for watching 🙏
the bullseye lnb is also ultra stable for tv channels ????
They do not ship to Croatia? WHy?
maybe i'm a bit confused but a frequency stability of +/- 10,000 Hz doesn't sound that impressive to me, I used to work in calibration and typically measured frequency stability in usually just a couple parts per million.
the bullseye lnb is also ultra stable for tv channels ????
Can i find satellite tv signal with this lnb and my sdr??
Should be able to yes, you’ll need to use software like SDR Angel maybe
the bullseye lnb is also ultra stable for tv channels ????
where to get/buy this bullseye lnb ?
Link in description, available mid February
the bullseye lnb is also ultra stable for tv channels ????
Where can i get a dream cheater? and Will the hackrf Front end amp burn out if I leave it on?
Othernet.is
the bullseye lnb is also ultra stable for tv channels ????
What is the opening angle of the feed horne? and has anyone opend it to sett external ox?
im also looking intto this as i need to cover a 2.2m dish and i cant tell if i need to find or adapt scalar rings
the bullseye lnb is also ultra stable for tv channels ????
Does this thing have "F" connectors?
Yep, that’s what the Green and Red coloured connectors are :)
10kHz ???? )))))
10GHz!!!!
the bullseye lnb is also ultra stable for tv channels ????