ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2020
- Links:
Car with 2x lipo batteries: www.banggood.com/Wltoys-14400...
FlySky GT2 Radio/Receiver: www.banggood.com/Flysky-FS-GT...
(or)
DumboRC Radio: www.banggood.com/DumboRC-X6-2...
2838 4500kv Brushless Motor & 35A ESC combo (28% off): www.banggood.com/2838-Sensorl...
3.5kg Metal Gear Steering Servo: www.banggood.com/JX-Digital-S...
2600mah 2s lipo: www.banggood.com/7_4V-2600-MA...
17T Pinion Gear: www.banggood.com/Wltoys-A949-...
Motor Mount: www.banggood.com/Aluminum-All...
Needle File: www.banggood.com/3Pcs-140mm-M...
3.2mm drill bit: www.banggood.com/3_2-or-4_2-o...
ESC Programme card: www.banggood.com/Racerstar-LE...
Hate tinkering, but want a car like this? Just buy the EMB 1 buggy: www.banggood.com/LC-Racing-EM...
In this video, I document the fitting of a cheap new brushless esc and motor, as well as the receiver and servo. This little upgrade gives punchy acceleration, higher top end and (most importantly) longer run times. I've gotten approx 25-30 mins on the 2600mah 2s from banggood. - แนวปฏิบัติและการใช้ชีวิต
Excellent guide to converting to brushless setup, don't know if this helps anyone but apparently the LC racing motor mount will fit which gives you the adjustments you need on the motor mount so no need to modify it.
Brushless motors are better then Brush motors
A world of difference
Have you a liink for the LC racing mount pls
@@stekeel6993 although it's possible to fit it, the bearing won't line up properly with the centre shaft and you will end up breaking it if you run it like it.
Nice simple and easy-to-follow tutorial. Best I've seen yet. Cheers
Well done sir, thank you! I just purchased one of these for my son.
Looked like a good setup you put in 👍🏁
Jesse B Motors thanks, yeah. I’ve tested it some more since the video and it really is quite rapid now, I’m well pleased! Also with the lighter motor, the chassis doesn’t bottom out on the ground now during landings which is a nice added bonus.
Nice video my Friend. Very Informative. Thanks' for shearing.
Very good informative video. 👍👍.
Thanks bro!
Join the dedicated subreddit for this car: www.reddit.com/r/144001/
I wish I had seen your video before I did my conversion. Burnt the motor on day two.
Oof, sorry to hear that mate - This one is still going well, it has developed some cogging, but I think its just cos it was a cheap ESC - Might take it to the skatepark and annihilate it soon :)!
Great video! Why didn't you switch to smaller 17t pinion instead of the that larger stock pinion?
Very cool.
I like to chance the standard connector to a xt60 connector :)
I think it can handle more current and the most lipo battery and charger have xt60 connectors :)
Hi GaminGit. Nice job on the upgrade video. I chose to go with the DumboRC X6 2.4G 6CH Transmitter with X6FG Receiver, your 2838 / 4500 kv motor suggestion w 35Amp ESC. . Do I really need the Racerstar LED Program Card for that 35 Amp ESC ??? or is it 95% likely factory settings on the motor / esc will be OK out of the boxes??
Factory settings would be just fine mate - The program card is just nice to have for tinkering :)
G'day mate, very nice program thanks for your time, what size motor did you change to and esc, would a Surpass Hobby 3660-2600kv motor & 60 esc be quicker, or as quick as a Hobby Fans 3650-3900kv motor & 60 esc do you think, thanks champ Pete Australia
i wanted to upgrade mine 144001 with the same parts, but i was actually hoping i wont have to do any drilling and fitting
Did you have to get a program card to set it up
It's funny how the new motor was smaller but made it faster
Nice buggy
Thanks 👍
Hi bro, Can we just use stock pinion?
Could have played the vehicle for longer where did you buy your set up I’ve just purchased one not sure how the brushless fits
Yeah in hindsight, I should of showed the improved straight line speed too - All the parts are from banggood and all the links are in the video description above.
Is there anywhere i can order a pinion that fits the shaft, I've snapped 7 drill bits inside the two pinions I have
James Butt wowsers! What material are the pinions you have? Are you keeping the drill bit spinning at a high rpm when drilling the pinion?
@@GaminGit seem like harden steel to me but it doesn't seem to want to drill i tried titanium drill bits so gonna buy a cobalt tip see if its any better
I have the same car but it's still not cheap after you add up the prices of the car and all the little thing but cheap then higher end cars..
Can i use a controller and reciever with gyro?
Dumborc with gyro
Hi ! What is the song playing on the background?
Search Epidemic sounds for 'one direction' ;)
@@GaminGit Thanks!
you have to be joking. those 2600mah batteries last me over an hour and twenty minutes.
I watched the funny and informative video well. You have a good hobby. Want to be a close friend.
우리 친구해요.~😊😊😊😊
Grinding Cheddar Gorge | Traxxas TRX4 (Very Rocky) [4K] th-cam.com/video/YBfEkSiK-wk/w-d-xo.html
Have you run this setup on 3s?
Lewis Gill I haven’t no - I think the ESC is only rated for 2s iirc (don’t quote me on that though)
@@GaminGit I've just ordered it and the specs says it's 2/3s up to 12v. Don't want to risk it of its going to go bang straight away
Lewis Gill I mean, it’s pretty quick on 2s as it is, I’m sure it will absolutely rip on 3s but it will also put extra strain on the drivetrain too.
What's the tip speed
I don’t have a GPS :(
do not put the brushless on this car, the motor is too powerful for the gears and the weight of the car. After 3 or 4 uses you start to see the first damage in the play of the tyres, arms and axle