No More NOISY ASIC Fans! Bitmain L3+ NOCTUA Fan Upgrade Guide
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2024
- In today's video, No More NOISY ASIC Fans! In this video we take the Bitmain Antminer L3+ Stock High RPM Fans and replace them with the NOCTUA 3000rpm Fan Upgrade. This video has a great Step by Step Guide for taking your L3+ Scrypt Miner which pays out in Dogecoin and Litecoin, and quieting down those NOISY Fans! These Quiet NOCTUA Fans are a perfect way to Replace your High RPM Fans with quieter high CFM Fans! While Making money, it doesn't need to be noisy with Crypto! Crypto Mining and Crypto Currency is a fantastic way to make Passive Income from Home, but be careful Crypto Mining is very volatile and can be risky. Enjoy today's video on my Bitmain L3+ Noisy ASIC Miner that Mines Dogecoin and Litecoin!
Stock Bitmain Antminer L3 Fan Bolt Lengths - 1 3/4 Inches
Bitmain Antminer L3 Fan Bolt Length with Noctua - 1 1/4 Inches
⭐Checkout CoinLedger Today! geni.us/CoinLedgerHOBBYIST
💰Discount Checkout Code: HOBBYIST
🔸CoinLedger.io Giveaway Link: coinledger.io/giveaway
🔸CoinLedger.io NFT Harvestooor: nftlossharvestooor.com
𝐏𝐚𝐫𝐭𝐬 𝐔𝐬𝐞𝐝 𝐢𝐧 𝐓𝐨𝐝𝐚𝐲'𝐬 𝐕𝐢𝐝𝐞𝐨
🔸Noctua NF-F12 iPPC 3000 RPM Fans geni.us/NoctuaFans
🔸Cable Clips geni.us/CableClipsHobbyist
🔸Mini Needle File Set geni.us/NeddleKit
𝐕𝐢𝐝𝐞𝐨𝐬 𝐋𝐢𝐧𝐤𝐬 𝐌𝐞𝐧𝐭𝐢𝐨𝐧𝐞𝐝 𝐢𝐧 𝐓𝐨𝐝𝐚𝐲'𝐬 𝐕𝐢𝐝𝐞𝐨
📺Is NOW the TIME to PURCHASE BARGIN CRYPTO Miners! • Is NOW the TIME to PUR...
📺How to UPGRADE your BITMAIN L3+ Firmware For BETTER Efficiency • How to UPGRADE your BI...
----------
⚡𝐋𝐨𝐨𝐤𝐢𝐧𝐠 𝐟𝐨𝐫 𝐚𝐧 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐭, 𝐇𝐢𝐠𝐡 𝐇𝐚𝐬𝐡𝐫𝐚𝐭𝐞 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐢𝐧𝐠 𝐇𝐨𝐦𝐞 𝐀𝐒𝐈𝐂 𝐌𝐢𝐧𝐞𝐫𝐬? 𝐂𝐡𝐞𝐜𝐤𝐨𝐮𝐭 𝐭𝐡𝐞 𝐈𝐏𝐎𝐋𝐋𝐎 𝐌𝐈𝐍𝐄𝐑𝐒!
I have 4 of them and LOVE them! geni.us/IPolloHOBBYIST
💰𝐓𝐡𝐞 𝐌𝐨𝐬𝐭 𝐏𝐨𝐰𝐞𝐫𝐟𝐮𝐥 𝐄𝐭𝐡𝐞𝐫𝐞𝐮𝐦 𝐚𝐧𝐝 𝐄𝐭𝐡𝐞𝐫𝐞𝐮𝐦 𝐂𝐥𝐚𝐬𝐬𝐢𝐜 𝐌𝐢𝐧𝐞𝐫𝐬 𝐄𝐯𝐞𝐫! 𝐉𝐚𝐬𝐦𝐢𝐧𝐞𝐫𝐬!
geni.us/JingleMiningHobbyist
⭐Use Checkout Discount Code "TheHobbyistMiner" to Support The Hobbyist Miner
💠𝐋𝐨𝐨𝐤𝐢𝐧𝐠 𝐟𝐨𝐫 𝐀𝐢𝐫𝐟𝐥𝐨𝐰 𝐈𝐧𝐭𝐚𝐤𝐞 𝐨𝐫 𝐄𝐱𝐡𝐚𝐮𝐬𝐭 𝐟𝐨𝐫 𝐂𝐫𝐲𝐩𝐭𝐨 𝐌𝐢𝐧𝐢𝐧𝐠? geni.us/ACInfinityHOBBYIST
⭐Use Checkout Discount Code "TheHobbyistMiner" for 15% Off
💡𝐓𝐫𝐲𝐨𝐮𝐭 𝐇𝐈𝐕𝐄𝐎𝐒 𝐄𝐧𝐭𝐢𝐫𝐞𝐥𝐲 𝐅𝐫𝐞𝐞 𝐚𝐧𝐝 𝐒𝐮𝐩𝐩𝐨𝐫𝐭 𝐓𝐡𝐞 𝐇𝐨𝐛𝐛𝐲𝐢𝐬𝐭 𝐌𝐢𝐧𝐞𝐫 𝐚𝐭 𝐭𝐡𝐞 𝐒𝐚𝐦𝐞 𝐓𝐢𝐦𝐞!
geni.us/HiveosHOBBYIST
🏆𝐓𝐫𝐲𝐨𝐮𝐭 𝐍𝐈𝐂𝐄𝐇𝐀𝐒𝐇 𝐄𝐧𝐭𝐢𝐫𝐞𝐥𝐲 𝐅𝐫𝐞𝐞 𝐚𝐧𝐝 𝐒𝐮𝐩𝐩𝐨𝐫𝐭 𝐓𝐡𝐞 𝐇𝐨𝐛𝐛𝐲𝐢𝐬𝐭 𝐌𝐢𝐧𝐞𝐫 𝐚𝐭 𝐭𝐡𝐞 𝐒𝐚𝐦𝐞 𝐓𝐢𝐦𝐞!
geni.us/NiceHashHobbyist
⭐Checkout Crypto Caverns Company Website Plus ASIC and GPU Hosting Services at geni.us/CryptoCavernsHOBBYIST
💰Save $100 at Checkout with Promo Code HOBBYIST
----------
🚀 𝐖𝐡𝐚𝐭 𝐆𝐏𝐔 𝐑𝐢𝐬𝐞𝐫𝐬, 𝐒𝐩𝐥𝐢𝐭𝐭𝐞𝐫𝐬, 𝐓𝐡𝐞𝐫𝐦𝐚𝐥 𝐏𝐚𝐝𝐬 𝐚𝐧𝐝 𝐅𝐫𝐚𝐦𝐞𝐬 𝐚𝐧𝐝 𝐈 𝐔𝐬𝐢𝐧𝐠?
geni.us/GPURisersHOBBYIST
⭐Use Checkout Discount Code "TheHobbyistMiner" for 10% Off
👑 𝐋𝐨𝐨𝐤𝐢𝐧𝐠 𝐭𝐨 𝐏𝐮𝐫𝐜𝐡𝐚𝐬𝐞 𝐚𝐧 𝐎𝐂𝐓𝐎𝐌𝐈𝐍𝐄𝐑 𝐂𝐫𝐲𝐩𝐭𝐨 𝐌𝐢𝐧𝐢𝐧𝐠 𝐒𝐞𝐫𝐯𝐞𝐫 𝐂𝐚𝐬𝐞? 𝐒𝐚𝐯𝐞 𝐚 𝐅𝐞𝐰 𝐃𝐨𝐥𝐥𝐚𝐫𝐬
geni.us/OctominerHOBBYIST
Use Checkout Code "TheHobbyistMiner" for $25.00 Off at Checkout
----------
🔥𝐀𝐦𝐚𝐳𝐨𝐧 𝐋𝐢𝐧𝐤𝐬 𝐟𝐨𝐫 𝐌𝐢𝐧𝐞𝐫𝐬 𝐭𝐨 𝐂𝐡𝐞𝐜𝐤𝐨𝐮𝐭:
🔸AMD Graphics Cards amzn.to/3LTKUJa
🔸NVIDIA Graphics Cards amzn.to/3CjBqDQ
🔸Beginner Mining Rig Frame amzn.to/3CfbTvq
🔸iFixIt Tool Kit for Miners amzn.to/3SKpQqJ
🔸Thermal Pads I Have Tested amzn.to/3UJRfe7
🔸Thermal Paste I Use amzn.to/3RmUNA7
🔸650w ATX Power Supply for Mining amzn.to/3BVL3Hc
🔸1300w ATX Power Supply for Mining amzn.to/3rdExGK
🔸Mini Screen for Mining Rigs amzn.to/3dO0h9o
🔸Sony ZV1 Camera I Use amzn.to/3SpU82e
🔸Wide Angle Lens I Use amzn.to/3dRpJuC
🔸Portal Microphone I Use amzn.to/3ChDOLf
🔸XLR Desk Microphone I Use amzn.to/3y4dhOT
𝐅𝐨𝐥𝐥𝐨𝐰 𝐓𝐡𝐞 𝐇𝐨𝐛𝐛𝐲𝐢𝐬𝐭 𝐌𝐢𝐧𝐞𝐫 𝐨𝐧 𝐒𝐨𝐜𝐢𝐚𝐥:
✅Twitter - / hobbyistminer
𝐉𝐨𝐢𝐧 𝐓𝐡𝐞𝐇𝐨𝐛𝐛𝐲𝐢𝐬𝐭𝐌𝐢𝐧𝐞𝐫 𝐃𝐢𝐬𝐜𝐨𝐫𝐝 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐭𝐲 𝐚𝐧𝐝 𝐓𝐚𝐥𝐤 𝐀𝐋𝐋 𝐀𝐛𝐨𝐮𝐭 𝐌𝐢𝐧𝐢𝐧𝐠!
✅Discord - / discord
✉ 𝐄𝐦𝐚𝐢𝐥 𝐟𝐨𝐫 𝐁𝐮𝐬𝐢𝐧𝐞𝐬𝐬 𝐈𝐧𝐪𝐮𝐢𝐫𝐢𝐞𝐬 - TheHobbyistMiner@Gmail.com
----------
#Bitmain #Dogecoin #cryptomining
📕 𝐕𝐢𝐝𝐞𝐨 𝐂𝐡𝐚𝐩𝐭𝐞𝐫𝐬 𝐅𝐨𝐫 𝐐𝐮𝐢𝐜𝐤 𝐑𝐞𝐟𝐞𝐫𝐞𝐧𝐜𝐞:
00:00 No More NOISY ASIC Fans! Bitmain L3+ NOCTUA Fan Upgrade Guide
00:12 The Hobbyist Miner Intro Video
00:30 Today's Video Sponsor - CoinLedger.io
01:26 My First Bitmain Antminer L3 ASIC Miner
02:30 Gameplan for Today's Bitmain L3 Fan Replacements
05:00 First Test - Stock High RPM Fans at 5 Minutes
06:15 Second Test - Stock High RPM Fans at 5 Minutes
06:50 How to Replace the Stock Fans with the Noctua Fans
11:45 NOCTUA 3000 RPM Fans Installed!
13:58 Third Test - NOCTUA Fans at 5 Minutes
15:50 L3 is Overheating with NOCTUA Fans
16:17 Problem SOLVED! We made a MISTAKE!
16:48 Third Test Again - NOCTUA Fans at 5 Minutes
17:56 Forth Test - NOCTUA Fans at 15 Minutes
18:30 Comparing the Noise Level of the STOCK vs NOCTUA Fans
𝐃𝐢𝐬𝐜𝐥𝐚𝐢𝐦𝐞𝐫- I am not an "Expert", I am learning along the way, just like you! Please do your own research, come to your own conclusions & make your own mistakes! I am NOT a Financial Advisor, please always take guidance from Professionals. Everything on this channel is for Fun as a Hobby and Entertainment for you, the viewer. - วิทยาศาสตร์และเทคโนโลยี
L3+ be hittin 🚀🚀 I run mine at around 480w at 15% fan speed without upgrade pretty quite with stock fans!
How did you do that?
@@Mr_Beerna blissz
Thank you for making this video. This is a really nice upgrade. Thanks for sharing!
I just a L3+ and new fans, Thanks for the info 😊
I should be getting my L3+ tomorrow, can't wait to start tinkering 😁
Thank you for doing this! I've wanted to test this for a long time but was hesitant to commit the money.
Glad I could help!
Awesome 👏 content as always THM .. it’s crazy to see the L3+’s still rocking since 2017 just goes to show you if the value of the coin remain high old asic miners can still be profitable!
Couldn't agree more!
when cutting bolts, put a nut on the bolt and cut behind it, when you remove the nut it cleans up the end of the thread. also makes it easier to hold in a vice so the cut is better to start with.
Great video, I’ve also swapped out the psu for the apw7 which seems to be quieter.
Did you ever do a follow up video? just ordered my first asic and am concerned about sound. Looking into this if it can handle it during summer.
When I Did My Fans I used M4xL30 mm screws 👍
Great video. I appreciate the fact that you included your mistake. One thing I was wondering is what was your power consumption between the stock fans and the aftermarket fans? Was there a difference?
I've been wanting to do this kinda job for ages. Thank you for showcasing your accomplishments!
I use Hive multiple flight sheets with various fan percentages which is nice to easily change fan speed as temp dictates from the hive app on my phone when I'm gone.
Great video!
Glad you enjoyed it
This is the exact video I needed... ordered 3 of these and using them as camper heaters... I was really hoping the fans would work... 75 db with that whining is too much
Yeah 75+ db is rough. But that whine noise is the worst! Goodluck!
Sweet video just an FYI the milwalke automotive wire stripper has 2 holes in it for cutting small diameter screws. Then you don't have to try to file the threads. Although the threads are standard the metric threads should be thinner and still thread in, you just cant screw in a standard thread screw into a metric hole. Then you just thread in the screw to the length you want and cut, and the end threads should not get damaged.
Good information! Thank you!
Looking/sounding great! I'm curious to see miner temps with higher air temps..
Mine stay in a grow tent that is usually around 120-130f!
Damn, thats nuts!
Great Improvement Hobbyist ! I wish Bitmain made improvements like this at the factory.
You and me both!
Hey mate. Just wondering if it's possible to turn this miner on/off remotely? I have no mains power connection but lots of excess solar during the day. I'd love to mine flat out when the sun is up and turn it off of an evening. Is this possible? Cheers
You can use the same bolts if you take the face plate off and screw them in from the Inside out, and some #8 sized nuts. And the noctuas work perfectly at 95F to keep em cool still, and the bitmain psu fan is why it's still loud
The Bitmain PSU is actually quiet, been really happy with it. Good thoughts on the bolts.
I Share the Video on Twitter
In my humble opinion you should be fine even in summer, as long as you get enough cool air into your shed & yes just as medium since portable AC either with a condensation tank or a small plastic tube will blow the warm AC air to the outside of your shed. I will have to do the same thing in my mining room in northern Cali there it goes in August, through September and sometimes even October into the high 90s up to almost 110 F & yes i live in the Eastbay still relatively close to the Water but it gets really hot here in late Summer.
Greetings & as always thank you for the awesome upload & the quality of your audio and Video on your TH-cam Videos. Since i will have soon to decide which camera & Microphone to purchase i was wondering if you would be willing to share which Canera and Microphone you are using. Greetings 😊🎬☂️
Thanks for the support! Goodluck Mining in California. At least your more North.
My opinion, I don't think they will be enough for the summer months as airflow is king to keeping these cool. I have 4 of these running all year and I created 3d printed 5" exhaust flanges where I pipe the hot air out of the garage which also eliminates the need for the quieter Noctuas as it lowers the noise level enough for me. I appreciate the time and detail devoted to this video as you answered a lot of questions I had but for me personally those fans do not move enough air late spring, summer and early fall months.
Great thing about mining, always trying to find ways to improve on your situation. Keep it up!
It's summer here in Australia...ironically I ordered some Noctua fans previously and they are on their way, so once I get them will let you know how they perform in higher ambient temps. I only have an L3+ but not much difference probably.
Perfect! let me know !
The noctua fans will struggle at high ambient, at 30c ambient you will be pushing the limit at 100cfm, 70c to be expected when detuned.
So far it's holding 45 degrees, have the fans on 55% but it's also 24 degrees ambient due to the La Nina...real test will be when it heats up more.
@@djblitzer82 jeeze, I was sitting at 70c with 27c ambient this morning.
@The Hobbyist Miner can you try this fan swap with an S19? Would love to see a video on that.
Thats going to be risky. I don't think Noctua fans would put out enough CFM at high enough RPMs to keep the ASIC cool.
@Jamien S. Hensley Have you found any videos with s19 fan swap? I just need an exhaust fan to pull out air from my btc miner. I have a AC infinity fan but I need more power to help the air exhaust out and the stock fans are too loud.
I have used the NF-F12 fan, Phantech T30, and new Silverstone FHS 120X. I would use the Noctuas only in a dusty environment. The T30 are way better for nosie and airflow. The FHS would be needed for overclocking it, they go to 4k rpm and not loud at all tbh.
Great info, thank you!
Do you think the T30 have more airflow than the F12's?
The phanteks are also cheaper in a pack of 3
The first video your mining 580 Mh and the second video 480 Mh please compare at same power and hashrate ????
You could have just taken off the back plate & reversed the stock screws & get the appropriate nuts that fit & reattach the back plate, also run it without the grills on it, some wind noise could be caused by the grills
Forgot to take the protective paper off the back of my ek water block when i built my hard line loop on my 5950x/5700xt. Took me a few days to figure out why the computer kept shutting off
Oh Man! Honest Mistake!
put a nut on the bolt before you cut it, when you take it off it will clean the end up
I bought some be quiet Fans but they dont spin. Can someone help me out
Can I do this with Antminer T15 and T17E?
You Should Try The Arctic Cool, Water Cooler Fans, See if any are large enough, Those are the Best water cooling fans available IMO, They may not be large enough, But maybe The Company that produces them For Arctic Cool Has Larger Ones. Water Cooler Fans are Designed to Push or Pull higher and More air Than other PC Fans, Pretty Sure Noctua Does Not make PC High Volume air Flow PC, Water Cooler Fans.
You can change the fan in the bitmain power supply too.
Next Adventure!
You can try Phanteks T30 FANs better than Noctua and 30 mm
Will keep them in mind. Thanks!
Hi ¡¡, The priority is to mine at 504 mh/s to make money. Reduce noise and temperature as much as you can, without spoiling maximum performance. Your technological priority is to make money with 504 mh/s. Obviously, if you change the fan to a less efficient and less noisy one, and reduce the power of the miner to 75% of the fans, you obviously EARN LESS MONEY.
Fun fact: if you are running the L3 at 504 MH just plug one pcie 6 pin into each board and use the other 6 you didn’t plug in to another L3 and run it at 504 MH. 2 L3’s one PSU
Wow really???
@@dmining65 true facts
can it be used for antminer s9 with this noctua fan?
Yes
⭐Checkout CoinLedger Today! geni.us/CoinLedgerHOBBYIST
💰Discount Checkout Code: HOBBYIST
🔸CoinLedger.io Giveaway Link: coinledger.io/giveaway
🔸CoinLedger.io NFT Harvestooor: nftlossharvestooor.com
Can you do the fan mod to Jasminer x4 series pretty pls
Its on my list. ;)
𝐏𝐚𝐫𝐭𝐬 𝐔𝐬𝐞𝐝 𝐢𝐧 𝐓𝐨𝐝𝐚𝐲'𝐬 𝐕𝐢𝐝𝐞𝐨
🔸Noctua NF-F12 iPPC 3000 RPM Fans geni.us/NoctuaFans
🔸Cable Clips geni.us/CableClipsHobbyist
🔸Mini Needle File Set geni.us/NeddleKit
Running an L3++ at only 504mh/s turn it up man
Heck No! I have it turned down for efficiency with the HIVEOS firmware. What do you think this is the BULL RUN. Electric is way too expensive!
@@TheHobbyistMiner sorry I got free electricity lol
So is it worth it?
Yep
You just need baffles or a muffler… no need for new fans
lets trade in a 6000rpm fan for a 3000rpm fan. Its sure is quite, Lol! Hunny, do you smell something burning?!.
Not at all. Hence why we monitored temps.
There's no such thing as RPM's..
Run a summer test!!! @TheHobbyistMiner
Great video!
Glad you enjoyed it