6 0L OIL COOLER BACKFLUSH
ฝัง
- เผยแพร่เมื่อ 14 ก.ค. 2015
- powerstrokehelp.com/
Archoil: archoil.powerstrokehelp.com/
This is a brief tutorial about how the oil cooler system works in a 6.0L Ford PowerStroke Diesel and how to back flush it. - ยานยนต์และพาหนะ
This is exactly why I run a coolant filter system. The first filter I changed 30 days after new heads and bulletproofing, I was amazed the junk that i found when i cut the filter open.
Can't tell you enough how much I appreciate your videos. Takes all the mystery out of the 6.0. Have done most of your preventive maintenance tips on my 06 f250. Thanks again and keep them tips coming
I bought a power stroke in Florida and DROVE through Atlanta without knowing about you and your shop.... WISH I would have known, I would have stopped by and have you guys clean up all the loose ends on my truck 🙌🏼
You do the best videos...I am going to need to do this.I replaced the oil cooler less that 1000 miles ago, and am getting deltas 15-20 towing. When I did the cooler, I also did a coolant flush (one of your videos) and then added a coolant filter...thought I was golden...guess not. Hope this solves it...thanks for all you do. Your videos have helped tremendously, and if I ever need major work, I'm bringing it there! You're not too far from Tallahassee :)
Paul Peeples I think the earlier video of Bill's on flushing was pretty basic & just covered changing the fluid out a few times with tap water & then flush once or 2x with distilled...
A more comprehensive approach is to chemically flush it, them boys @ the Cummins dealership know whats goin on with Restore & Restore+ (Use both, each have their own separate applications in the coolant system theyre good for) -Youll be amazed at the amount of silicate garbage that will be evacuated from your coolant system
I need to know more about that step in the front bumper!!!! That's awesome
this guy is a brain. wish I lived closer to your shop.
I had the bullet proof diesel external oil cooler and water pump put on when I did this, now my '03 6.0 runs much cooler and I live in the Rockies.
Still happy with it?
I love that stand on the front of the truck! hard to make out the mounting to the tow ring though.
I need that!!!! Lmao!!! Love the videos as well.
I noticed there's a coolant filter. was that not good enough to keep the coolant clean?
Bill, does this same rule apply to 7.3 trucks? I have seen my 2003 7.3 oil temp get up to 250 pulling very heavy up a grade in very hot conditions in Phoenix. Truck is very healthy though. Thanks for all your great videos.
Any reason that a stainless pressure washer gun & swivels wouldnt work too well for making a Dooshmaster 2000?
Bill I need a gem module for my 2000 7.3 I can not locate one they were discontinued any thoughts would help thank you
Bill I need your advice I have a 2004 Ford F350 original engine stock everything 300.000 km 186.000 Miles the coolant and oil temps are as follows ect 200F eot 220F doing 62 miles hr no load and If I put the passing gear in and it blows coolant out the coolant bottle so I really hoping my EGR cooler is crapped out. What do you think bill I know it's hard since you aren't seeing the truck in person
Your my hero bill hewitt!!
Can someone explain what was going on with the egts is it normal that they get high and then you let off and they go down? Are they supposed to get real high like that?
What is the best coolant to use on these 6.0’s? Do you ever test the fluid and add the pellets (can’t remember their name) to help with cavitation?
So I have 2005 6.0 Excursion everything is stock except the banks intercooler and exhaust, still running ford spec coolant my temps never get above 230 and deltas never above 10 pulling a 9000lb travel trailer last summer do I need to worry about my oil and EGR cooler?
What did you make your drain pan from?
What tuner do you use on the 6.0 L
Why do people on forums say the trucks should have very close eot and ect? Is running those hi temps okay? I have never ran such hot coolant temps but my eot have gotten to 237s
I though that Bill installed collent filter for power Stoke engines that would be a great idea.
In your opinion which psd is the best
What air pressure do you recommend when performing the flush?
What kind of air PSI are you running through the douchemaster 1000?
Like 12psi
Is it bad if my delta is 45 degrees. Coolant is constant at 188. Oil at 233 with no load. Just highway speed. Think it cool be my oil temp sensor?
those numbers are crazy. my 2006 pulling a 9000lbs 5th wheel camper this summer when 96 degrees F out hit 208-210 ECT and around 215 to 218 EOT. normal driving empty is 188-194 ECT and 194-197 EOT.
Yea I agree ☝️ my coolant never gets above 192 and oil I’ve seen at 223 when I’m in a tune running it hard!
$1,500-$1,600 for an oil cooler replacement? Wow! What is the cost for the oil cooler flush then Mr. Hewitt?
your big highway hill made me lol, highways here lead thru the Rockies.
coolant filter and a big ass external mount oil cooler...i figured you'd be for those things by now Bill
Does anyone have a Home Depot version of this? How much air pressure is being used here also?
the coolant temp seems high
My truck runs 190° f to 206° f in coolant and 198°f to about 215° f in oil it only runs that hot when i get into it. 75 mph on highway coolant 196-198°f oil 200-206°f
I had a chevy suburban that ran at 210-220 and hit 230 or 235 if ya pushed it.. it's near normal and probably just needs antifreeze to water ratio checked. my 6.0 runs at near constant 212 at idle after 20 minutes of driving
I have to questions for ya Bill I have an 06 and the fan clutch come on at 210 ect regardless of pulling or not is that normal eot is useally 1 or 2 degrees within that. And what is normal eot I believe I have a stuck open the most at because my eot is around 175 we cruzing around.
Ginger Squid sounds like you need a new t-stat to me. it should be 192+ when fully warmed up.
Douche master 1000. I love this guy.
My husband just used your video to backflush his oil cooler, last month. He did flush some funk out, similar to what you did here. He just did it a second time, and even more gunk came out (about the same amount). Is that abnormal??
No. Never a bad idea to reflush . There’s so much silicone and junk in these engines to start with. Especially if let coolant degrade.
When mine failed in our ‘05, I was driving to Costco. No load. No tow. Nothing. Tested at 39* difference by the Ford dealer. Replaced under warranty and at about 40K miles.
I got a 2010 ford f250 6.4 and my oil cooler is going bad are something clogged it up.. I get the ranch light and I never pull anything but I do long traveling and the like comes on about 100 miles down the road or so took it to the ford house they said its the oil cooler. 3k for it to be fix... could I get a coolent flush? and see if that would unclog it?
I would also like to know if there's a way to do a coolant flush on a 6.4l
Why not just put an external oil cooler on these trucks and reprogram the computer to kick the cooling fan on sooner?
BPD makes an adapter to run a manuel fan clutch of a 97 f250 and getting ride of the electric fan......
harry guy same problem on my ktm 690. simple solution is to place a switch with a lower temp switchpoint
Been running manual fan for years. Always works.keeps ect down under 195 no matter how hot it is outside. Easy upgrade.
Is that a 6.9 IDI on that trailer?
Could Someone please Tell Me what the Correct Deltas Should Be.
I Been Hearing that a 15° Difference is the Max Allowed as per FORD. Just wondering because i Recently ( Just 4,000 Miles Ago ) Did the Complete Bullet Proofing on my 2006 6.0 Also Turbo and Injector Upgrade, and Many more mods. Also Deleted the EGR, and Switched to the Red Cat ELC-1 Coolant. And Replaced the Oil Cooler. Maybe this was the Mistake i didn't replace it with a Ford Cooler, used a XDP Cooler, said it was the Same Updated Design as Ford's. My Deltas are on the High Side. Highest i ever seen was 40°-45° Difference, after driven Hard for a While. Average is ECT 192° EOT 234° After driven on High Way for about 30 minutes. I Bought Truck Brand New Always serviced by me, Oil Always Changed Every 4,000 Miles and so on. Only had 81,000 Miles when everything was done. Due to EGR Cooler letting go. Now I'm approaching 86,000 Miles. Any Help would be appreciated.
UPDATE I just recently did an Oil Cooler Flush Dropped my Oil Temperature about 30° I'm seeing temperature 204°-206° Now and also installed a Mishimoto Coolant Filter. It's starting to get Colder Out where i live and noticed my Temperature dropping Even Lower now, even on a Long High Way Drive. Before flush i was getting 234°-239° that was in 90° Summer Heat. Flushing the Oil Cooler really helped a lot.
You should check the delta under specific conditions: a 20 minute run @ 65 mph on a level highway with no load. If you're more than 15 degrees off in that test then you have a failing oil cooler (in a stock truck). With an EGR delete and a remote cooler, you might expect different conditions, so some additional research might be needed.
Should’ve used oem oil cooler or BPD
I get deltas of 20+ all the time running down the interstate Empty. But neither one of the temps get close to those temps, will I be OK as long as I don't get oil over say 225°f?
uselessgrant11 Not according to Ford, they go by temp deltas between oil n' water...
uselessgrant11 Better keep an eye on your EGR... Make sure you don't see any oil sheen in your coolant... But that seems to me like it's time to replace your oil cooler before it turns into a disaster.
What engine and how many miles
Pulling nothing my eot's at highway speeds are anywhere between 225 and 232. But my ect's never get over 210. I believe previous owner may have installs one of those high flow coolers bc at lower speeds (rpm's under 1500) and at idle, the eot's get well below 220
Bill I like your videos but I have a gas Super Duty
e350. Aside from all the normal maintenance do you have words of wisdom for us gas SD owners? Love the channel love your sight.
Normally (Meaning all seasons except summer, and this is the first year after having done Ed's craazy ass flush & switching over to the strawberry coolant) my unladen coolant temps are 5-10 deg negative delta's (oil typically being cooler than water), this summer it seems as though Im getting positive delta's (oil being hotter than water) of 8-25'ish deg. in town, on surface roads
I wound up going out of town the other day & noticed once I got it out on the open road that my delta's were negative once again.
Any scientific reason for this?
You should do a video on the old brick nose that was on the trailer, was it a 6.9idi?
bull nose sry
Be a short video. IDI's suck, the end.
What is the brand and possible model number of the flushing tool used in the video?
Jonathan Strait
OTC makes one. I think it’s OTC 6045
@@paftaf www.ebay.com/i/392325480253?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=392325480253&targetid=884132925559&device=m&mktype=pla&googleloc=9031291&poi=&campaignid=9426322753&mkgroupid=95066775505&rlsatarget=aud-412677883135:pla-884132925559&abcId=1141016&merchantid=6296724&gclid=Cj0KCQjw-_j1BRDkARIsAJcfmTGKHKWz9GmRaABCTHiYbOkEyVniEWD872dg0xCMh64d_qwAC7TXsC8aAmaGEALw_wcB
What’s the normal oil temp it should be at when driving normal with no load ?
Great question
I’m at 8000ft and I never see above 205-210°. I imagine when I’m down at sea level later this year I won’t see over 195-200°
My truck has no oil temp gage how do you knownthe temp?
Get a SCT X4 or a Edge insight so you can plug it into your OBD connector and monitor your temps.. kinda like a heart monitor at the hospital and will save you..
My oil temp are OK but my deltas are like 40...because my coolant never get over 160 or 170??
No
What is the max delta I would comfortably like to see with a 6.4?
The cost of purchasing a 6.0 or a 6.7.
06 f250 regular cab
Mostly stock with sct tune
210,000
Is it possible to have good fuel pressure but not enough volume
Fuel psi 53-57
I'm max boosting at 20-22psi unless in passing gear
Or if I return the truck to stock
It'll run 28psi all day
I've checked for boost leaks no leaks
Ficm 47.5-48.0v
Icp warm is 580psi at idle
Icp warm cranking is 580-650 psi
Icp voltage at idle is 0.9v
Vgt at warm idle 63.9%
Ipr warm idle 21% 2000rpm 32%
Exhaust back pressure warm idle 2psi
Ficm sync 1
Baro warm idle 14.7 psi
Map warm 15 psi
Engine load warm 29%
Maf warm idle 33-37g/s
Main injector power warm idle 49.2
Injector pulse width 1.02-1.18
Battery voltage idle 13.6
Trans temp idle 142
Engine coolant temp 184
Engine oil temp 189
It has consistent crank over no flutters or anything so no sigh of bottomed damage
Did you ever figure out your issue? I have same issue with max of 22psi
Bill, do you sell the oil cover/hose adapter piece you made as a kit?
Check out fixur6.com/ for the hose adapter.
Cathy Lowry
The link you sent is broken.
@@paftaf www.ebay.com/i/392325480253?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=392325480253&targetid=884132925559&device=m&mktype=pla&googleloc=9031291&poi=&campaignid=9426322753&mkgroupid=95066775505&rlsatarget=aud-412677883135:pla-884132925559&abcId=1141016&merchantid=6296724&gclid=Cj0KCQjw-_j1BRDkARIsAJcfmTGKHKWz9GmRaABCTHiYbOkEyVniEWD872dg0xCMh64d_qwAC7TXsC8aAmaGEALw_wcB
hood spacers and a switch controlled fan is the poor mans fix for this!
It was incorrectly stated in the video that the max delta is 20 degrees; it is 15 degrees per Ford TSB 09-8-3. Just my 2 cents.
Hell my fan on my 07 6.0 comes on at ECT 205 and EOT 210... Why did yours wait till 238?
Yeah mine will come on at 205. or not. it's wierd.
Did he just say in the beginning that they bullet proofed this truck 2 yrs ago??? Then why is this happening??? I am confused???
i had to change that hose under the turbo.
1 hour of hand twisting agony
Dam man 226 ect? You might need to get rid of the stock fan clutch and go straight thermal clutch.
Buy a bulletproof diesel oil cooler, trust me. It takes it out if the valley and moves it to an external position.
have you ever worked on a 6.7 l powerstroke?
Douche Master 1000. Im dyin' laughing again!!! Bill youre f*cking hilarious!
Just pray you dont blow out some seals
thats why u pay 2500 for a bulletproof oil cooler its worth it just a bad design on oil cooler
Did you really just film a video in front of a running 6.0?
need to switch to a elc coolant no more clogged oil cooler
Shouldn't you have removed this thermostat as well that make sure you getting adequate debris out of the system
This may have been commented on, but why not just tap the intake nipple to the degas like I do and back flush the cooler that way. Its so much easier then fooling with that little cover. As long as the egr coolers been bypassed its a straight shot. Also your coolant temps are going way to hi dude...
Kevin Scott ... I am interested in what you are saying here. I have an 04 that has been builtproofed, coolant filter, egr delete, the works.... it was done less than 30,000 miles ago. My deltas are anywhere from 15-24 ° difference while normal driving. I want to try flush my oil cooler, i know there is some yucky stuff in my coolant because I cut my coolant filter open and it was caked with stuff. I basically want to know more about how you back flush the oil cooler like you said if possible. Thank you
Ok cool, not a problem. What state are you in?
Kansas
Ok. I do this for a living and now is family time. Call me tomorrow during East coast business hours and I'll explain it. 704-242-4510.
10-4 sir ... Thank you, is 730am EST time fine? Or what EST time is best.
Both of those temps are fuckin terrible
pretty sure I saw an 18 degree delta in the after video. so all that for no improvement.
Change that fuckin cooler
Your fan speed is bad too , the fan clutch is bad, my fan is new and it always 1000 fss. City driving its 600 to 1000 FSS.
For the love of all things mechanical and good! Get a camera, any camera. Anything but a cell phone.
my 6.0 coolant temp was 190 and oil temp was 240. Rip
Screaming Eagle my eot gets up to 248 when towing and 230 daily driving. ECT is normal 190's. My truck has 250,000 miles and haven't had a single problem. I think a lot of this doomsday delta talk is bs
nu SkooL Fishing sometimes I think the same thing like is it all just a bunch of bs?
Don't know where he learned math but his temps were still over 15 going down...flush did nothing
mike Bynack he’s got a trailer up a hill. If it was unloaded on flat ground. That is where the 15 is a strict rule
Instead of wasting all that time I would've went straight to the flush instead of all the BS...........
MeMad Max I think he was just showing the difference