Hey man love the vid! I’m looking into putting a Ls in my 3.4 f body and this vid helped me out on a few things, could you maybe upload one about the engine wiring? And what harness was used. Thanks!
Great video series! Thanks for posting! Was wondering though, do you have the part# and/or the brand of V8 K member you're using? I have a '02 Catfish Camaro that I want to do a swap for, but don't want to spend over $500 for the "performance" ones I see on eBay. Thanks in advance for any information you or anyone has!!
I actually bought a 2001 ls1 t56 harness out of a trans am it’s pretty much plug and play I explain most of it in the video where I try getting it running! Thanks for the comment!
How much research, If any did you do before the swap? I'm asking because i am doing this swap and have run into a couple issues. I am hoping you can help. I have a 4th gen firebird that was originally a V6 car. I have installed an LM4 5.3 in it. I am using the factory V6 k-member with Hooker 71221001HKR. The documentation reads "fully compatible with Hooker 4th-gen mid-length headers and dual exhaust system recently developed for this vehicle platform (requires installation of LS1 steering rack)". I am also using LS1 motor mounts and factory 2004 Trailblazer exhaust manifolds. First problem i am having is it appears that the steering gear will hit the exhaust manifold. The second issue is. I am using the (knockoff) alternator relocation bracket and it appears the power steering plumbing is in the way. Do you have any insight?
Honestly could be the placement of the steering rack because your running the v6 k member, and from what I looked up is that I think there is 2-3 different steering racks for these cars you can not run a v6 rack if your running the LS, if you haven’t swapped the rack your best bet is to do that and get it from a z28 or an ss, the steering rack and the steering shaft “part from the steering column to the rack” both need to be changed
@@rocnrollgarage thank you! I appreciate you replying. I'm also thinking about maybe coping the exhaust manifold right there and welding in a piece inverted.
I am doing an LM4 (aluminum version) of the LM7 in 99 V6. Motor is mounted to the V6 k-member with Hooker brackets supposedly designed for the application but i'm having issues with the steering gear and alternator.
@@817_Gomez_ I bought them off a guy of Facebook. I would recommend going over to speedengineering.com and getting a set here’s the link for the speed engineering ones speed-engineering.com/collections/1998-2002-camaro-firebird-exhaust/products/speed-engineering-gen-4-camaro-firebird-1-7-8-longtube-headers-1998-2002-ls1-engines. And here’s a link for a the Texas speed headers www.texas-speed.com/p-291-tsp-98-02-f-body-1-78-long-tube-headers-w-catted-y-pipe.aspx
This car I used the 5.7 harness and ecu and then took it to get tuned the 5.7 harness will plug into the factory v6 harness but there is a separate power wire that needs to be ran I explain this in the next video after this one was posted I’m pretty sure. Hope this helps!
@rocnrollgarage thank you very much for your information and responding. This stuff is really confusing but I think I got a good base idea, I'll probably stay away from the 4th gen motors as I want as less electricity involved.. The only ones around are v6s, there is a 98 poniac fbody with an ls1 already in it but it has really high km.
This my first time doing this I'm buying a 99 SS,Z28 body for $200 im trying see if it be cheaper if I get z28 ,SS drivetrain and frame? or get the RS V6 Version? to put body on and convert over
HarborFreight moving dollys and 6 ton jack stands are a must
The best thing to do is sit the entire assembly on a roller dolly ,a friend of mine modified a old floor creeper to get the job done..
Hey man love the vid! I’m looking into putting a Ls in my 3.4 f body and this vid helped me out on a few things, could you maybe upload one about the engine wiring? And what harness was used. Thanks!
Did you figure this out?
Great video series! Thanks for posting! Was wondering though, do you have the part# and/or the brand of V8 K member you're using? I have a '02 Catfish Camaro that I want to do a swap for, but don't want to spend over $500 for the "performance" ones I see on eBay. Thanks in advance for any information you or anyone has!!
I just used a factory v8 k member from a z28
Ok cool. Thanks for the info! @@rocnrollgarage
Nice work..!! Did you use the clutch kit flywheel and pilot bearing from a f body?
Yep exactly!
@@rocnrollgarage great thanks for the info. I’m doing a swap 5.3 t56 but I was not sure what flywheel and clutch to use..
What did you do for the harness with the 5.3 to make it work from the v6 to the v8 truck harness
I actually bought a 2001 ls1 t56 harness out of a trans am it’s pretty much plug and play I explain most of it in the video where I try getting it running! Thanks for the comment!
Didn't the '99 come with a bigger LS? The 5.7?
@@BrettWeatherston yes but this is kinda the budget way to go. Just a Cammed truck motor, iron block
How much research, If any did you do before the swap? I'm asking because i am doing this swap and have run into a couple issues. I am hoping you can help. I have a 4th gen firebird that was originally a V6 car. I have installed an LM4 5.3 in it. I am using the factory V6 k-member with Hooker 71221001HKR. The documentation reads "fully compatible with Hooker 4th-gen mid-length headers and dual exhaust system recently developed for this vehicle platform (requires installation of LS1 steering rack)". I am also using LS1 motor mounts and factory 2004 Trailblazer exhaust manifolds. First problem i am having is it appears that the steering gear will hit the exhaust manifold. The second issue is. I am using the (knockoff) alternator relocation bracket and it appears the power steering plumbing is in the way. Do you have any insight?
Honestly could be the placement of the steering rack because your running the v6 k member, and from what I looked up is that I think there is 2-3 different steering racks for these cars you can not run a v6 rack if your running the LS, if you haven’t swapped the rack your best bet is to do that and get it from a z28 or an ss, the steering rack and the steering shaft “part from the steering column to the rack” both need to be changed
@@rocnrollgarage thank you! I appreciate you replying.
I'm also thinking about maybe coping the exhaust manifold right there and welding in a piece inverted.
@@rocnrollgarage can you tell me what steering rack you used? Everything I find says won't fit. Even an LS1.
@@scottschaos4376 I just bought one off of a 98-02 z28 but like I said idk if the z28 racks will work on the v6 crossmember
What harness did you use?
Good video learned a few things looking to LM7 swap a 99 v6 right now
Awesome man! If you got any questions just ask! I’m also learning as I go
I am doing an LM4 (aluminum version) of the LM7 in 99 V6. Motor is mounted to the V6 k-member with Hooker brackets supposedly designed for the application but i'm having issues with the steering gear and alternator.
@@rocnrollgaragehey so I’m swapping a 5.3 into my 95 v6 Camaro body do I need to find a 2wd 5.3 harness or can I run an ls1 harness?
@@rocnrollgarageit’s a 3rd gen 5.3 btw
@@F-Bodys I’m running an ls1 harness and ecu!
Hell yeah! Subscribed🛠🚀
Where did you get your headers? I can’t find them in texes speed website
@@817_Gomez_ I bought them off a guy of Facebook. I would recommend going over to speedengineering.com and getting a set here’s the link for the speed engineering ones speed-engineering.com/collections/1998-2002-camaro-firebird-exhaust/products/speed-engineering-gen-4-camaro-firebird-1-7-8-longtube-headers-1998-2002-ls1-engines. And here’s a link for a the Texas speed headers www.texas-speed.com/p-291-tsp-98-02-f-body-1-78-long-tube-headers-w-catted-y-pipe.aspx
So do you run the 5.3 harness with the original harness that comes in the car
This car I used the 5.7 harness and ecu and then took it to get tuned the 5.7 harness will plug into the factory v6 harness but there is a separate power wire that needs to be ran I explain this in the next video after this one was posted I’m pretty sure. Hope this helps!
Whats the best 5.3 to use for this kind of swap? There are so many options. Just couriouse witch one drops in? do they all drop in?
They all drop in but the earlier ones share the same oil pressure, cam, crank, map, sensors I may be missing a few
@@rocnrollgarage is there any major difference between the 4th and 3rd generation Ls when it comes to the swap?
@@itzaxo8860 only thing I think is different is the actual sensors and there location
@rocnrollgarage thank you very much for your information and responding. This stuff is really confusing but I think I got a good base idea, I'll probably stay away from the 4th gen motors as I want as less electricity involved.. The only ones around are v6s, there is a 98 poniac fbody with an ls1 already in it but it has really high km.
This my first time doing this I'm buying a 99 SS,Z28 body for $200 im trying see if it be cheaper if I get z28 ,SS drivetrain and frame? or get the RS V6 Version? to put body on and convert over
Those blocks were set the most fragile way you could have set them. Very dangerous.
Your welcome