Thank you so much for sharing this info. Also, thank you for NOT putting annoying music on it, you were fast and to the point, perfect video! Thanks again!
No, I haven’t done that yet. I’ve based success on the fact that algae hasn’t returned. The copper pipe releases copper ions into the water regularly at about 0.02-0.04 PPM. Over time, these levels accumulate, and by mid-summer, they should reach the optimal level of 0.25 PPM for effective algae control. In a 20,000-gallon pool, this process typically takes about 6 to 12 days. Naturally, this estimate can vary depending on the size of the pool. I’ll test the water soon and report back with the findings! Thanks for the feedback, and if you haven’t please consider subscribing to my channel! 😉
@@WoodandStuff-55 Thankyou. The reason I ask is that many pool testing kits include a test for copper. Anything above .2 ppm is considered NG as copper causes staining.
@@WoodandStuff-55aye do you got anything yet? I was wondering if like when it reaches optimum level do you withdraw from using the copper contraption for a bit?
Thank you for your feedback! I hope you subscribe and help me grow my channel. I have a variety of interests and plenty of helpful ideas to share. I love sharing knowledge that can benefit others because I've received so much help along the way!
Absolutely, they do, and thank you for watching my channel! If you haven’t already, I’d really appreciate it if you could subscribe to help me reach my goal of 1,000 subscribers. Your support means a lot!
Never have to skim with a net if you have a BETA solar powered skimmer. Keeps all the leaves, grass and floating debris from falling to the bottom. Especially helpful after lawn mowing day. Next to my Dolphin it is the best. I just ordered the skimmer socks. Did not know about them. Thanks.
I got the Remington copper ionizer for my little pool. Now the vinyl is stained, and pool floats and pool hoses have green stains on them. I'm gonna try and fix the situation. With some Biogaurd. It's upsetting as i just got this pool a few weeks ago. Wish i would've never used the copper ionizer. Or at least watched the copper levels more closely.
Typically, the goal is to maintain a copper ion concentration in the pool water between 0.2 to 0.4 parts per million (ppm). This concentration is effective for preventing algae growth while being safe for swimmers and pool equipment. Using my method releases copper ions at a much slower pace, so I haven’t had any issues like yours. It's important to regularly test the copper levels in your pool water when using the Remington device to ensure that the levels remain within the recommended range. Adjustments can be made by either removing the ionizer for a period of time or cleaning the copper anode as needed to regulate the copper ion concentration. I’m sorry to hear about the staining. Try using Jack's Magic Stain Solution #1 (amzn.to/3YsUlHF). Here are the steps to using it: First, lower the chlorine level to 1.0 ppm or lower, adjust the pH to 7.2 - 7.6, and ensure the total alkalinity is between 80 and 120 ppm. Turn off any salt chlorine generators. Perform a spot test by applying a small amount of Jack's Magic Stain Solution #1 to a stained area. If the spot test is successful, pour the stain solution evenly around the perimeter of the pool, using 2 pounds per 12,000 gallons of water. Gently scrub the stained areas with a pool brush. Turn on the pool pump and filter system, letting it run continuously for at least 24 hours. Regularly check and adjust the pH to maintain it within the 7.2 - 7.6 range, and gradually bring the chlorine levels back to 1.0 - 3.0 ppm after 24 hours. Add a metal sequestrant to the water to bind any remaining metal ions and prevent new stains. Regularly test the water for metal content and maintain balanced pool chemistry. If necessary, reapply the product and repeat the process until the stains are removed. Good luck and consider subscribing for more tips and tricks!
Funny story… my 10 yr old daughter (at the time) with a knack for finding hacks, bet me $5 that using a Mr. Clean Magic Eraser sponge would work in our pool about 4yrs ago. I took the bet and lost! 🤣😂 In case you were wondering like I was how these sponges work, they filter pool water effectively by scrubbing away algae and adsorbing iron particles thanks to their melamine foam composition and micro-porous structure. I know how crazy it sounds but I promise this hack works!! BTW thanks for watching my channel! I hope you subscribed and will come back to my channel again!
Thanks for the question! I use chlorine tablets - 3” in a floater - that’s it. I change socks often and use the robot every other day. If you haven’t already consider subscribing to my channel for more tips and tricks! 😉👍🏼
Copper ions can cause staining in a plaster pool if the concentration gets too high. Keeping the level around 0.25 PPM is generally safe and effective for algae control, with minimal risk of staining in most cases. However, staining can still occur depending on factors like water chemistry and pH. Regular testing and maintaining balanced water chemistry are crucial to prevent any issues. If you haven’t already - consider subscribing and helping my channel grow! 😉👍🏼
Placing the copper pipe for algae control directly in the skimmer basket is optional, however, it tends to corrode. Placing it inside a PVC pipe prevents the copper degradation from staining any parts of the skimmer basket.
Thank you so much for sharing this info. Also, thank you for NOT putting annoying music on it, you were fast and to the point, perfect video! Thanks again!
Thank you for the feedback - love to hear my video helped! Hopefully you subscribed to help a brother out! 😉👍🏼
Very nice! Curious about that copper hack though. Have you checked the copper levels in your pool water since you started doing that?
No, I haven’t done that yet. I’ve based success on the fact that algae hasn’t returned. The copper pipe releases copper ions into the water regularly at about 0.02-0.04 PPM. Over time, these levels accumulate, and by mid-summer, they should reach the optimal level of 0.25 PPM for effective algae control. In a 20,000-gallon pool, this process typically takes about 6 to 12 days. Naturally, this estimate can vary depending on the size of the pool. I’ll test the water soon and report back with the findings! Thanks for the feedback, and if you haven’t please consider subscribing to my channel! 😉
@@WoodandStuff-55 Thankyou. The reason I ask is that many pool testing kits include a test for copper. Anything above .2 ppm is considered NG as copper causes staining.
I will definitely be testing and I'll provide some honest feedback. Just as a side I have not seen any staining... yet! ;)
@@WoodandStuff-55aye do you got anything yet? I was wondering if like when it reaches optimum level do you withdraw from using the copper contraption for a bit?
Great info! Thank you!!
Appreciate the feedback!
Excellent hacks!🙏
Thank you for your feedback! I hope you subscribe and help me grow my channel. I have a variety of interests and plenty of helpful ideas to share. I love sharing knowledge that can benefit others because I've received so much help along the way!
Easy hacks! Thanks for sharing 👍🏽.. do these work for in ground pools too?
Absolutely, they do, and thank you for watching my channel! If you haven’t already, I’d really appreciate it if you could subscribe to help me reach my goal of 1,000 subscribers. Your support means a lot!
Never have to skim with a net if you have a BETA solar powered skimmer. Keeps all the leaves, grass and floating debris from falling to the bottom. Especially helpful after lawn mowing day. Next to my Dolphin it is the best. I just ordered the skimmer socks. Did not know about them. Thanks.
I’ll have to check that out! Thanks for sharing!
I got the Remington copper ionizer for my little pool. Now the vinyl is stained, and pool floats and pool hoses have green stains on them. I'm gonna try and fix the situation. With some Biogaurd. It's upsetting as i just got this pool a few weeks ago. Wish i would've never used the copper ionizer. Or at least watched the copper levels more closely.
Typically, the goal is to maintain a copper ion concentration in the pool water between 0.2 to 0.4 parts per million (ppm). This concentration is effective for preventing algae growth while being safe for swimmers and pool equipment. Using my method releases copper ions at a much slower pace, so I haven’t had any issues like yours. It's important to regularly test the copper levels in your pool water when using the Remington device to ensure that the levels remain within the recommended range. Adjustments can be made by either removing the ionizer for a period of time or cleaning the copper anode as needed to regulate the copper ion concentration.
I’m sorry to hear about the staining. Try using Jack's Magic Stain Solution #1 (amzn.to/3YsUlHF). Here are the steps to using it:
First, lower the chlorine level to 1.0 ppm or lower, adjust the pH to 7.2 - 7.6, and ensure the total alkalinity is between 80 and 120 ppm. Turn off any salt chlorine generators. Perform a spot test by applying a small amount of Jack's Magic Stain Solution #1 to a stained area. If the spot test is successful, pour the stain solution evenly around the perimeter of the pool, using 2 pounds per 12,000 gallons of water. Gently scrub the stained areas with a pool brush. Turn on the pool pump and filter system, letting it run continuously for at least 24 hours. Regularly check and adjust the pH to maintain it within the 7.2 - 7.6 range, and gradually bring the chlorine levels back to 1.0 - 3.0 ppm after 24 hours. Add a metal sequestrant to the water to bind any remaining metal ions and prevent new stains. Regularly test the water for metal content and maintain balanced pool chemistry. If necessary, reapply the product and repeat the process until the stains are removed.
Good luck and consider subscribing for more tips and tricks!
@WoodandStuff-55 Thank you so much for your reply! 😊
Any time! 👍🏼
I use skimmer socks, never thought about using a magic eraser. Thanks. That will help with my iron filtering.
Funny story… my 10 yr old daughter (at the time) with a knack for finding hacks, bet me $5 that using a Mr. Clean Magic Eraser sponge would work in our pool about 4yrs ago. I took the bet and lost! 🤣😂 In case you were wondering like I was how these sponges work, they filter pool water effectively by scrubbing away algae and adsorbing iron particles thanks to their melamine foam composition and micro-porous structure. I know how crazy it sounds but I promise this hack works!! BTW thanks for watching my channel! I hope you subscribed and will come back to my channel again!
Don't use a magic eraser. They are not magic, they are micro plastics glued together.
Do you use any pool chemicals at all?
Thanks for the question! I use chlorine tablets - 3” in a floater - that’s it. I change socks often and use the robot every other day. If you haven’t already consider subscribing to my channel for more tips and tricks! 😉👍🏼
@@WoodandStuff-55
I'm guessing you couldn't use the copper pipe on a plaster pool because it will stain the plaster.
Copper ions can cause staining in a plaster pool if the concentration gets too high. Keeping the level around 0.25 PPM is generally safe and effective for algae control, with minimal risk of staining in most cases. However, staining can still occur depending on factors like water chemistry and pH. Regular testing and maintaining balanced water chemistry are crucial to prevent any issues. If you haven’t already - consider subscribing and helping my channel grow! 😉👍🏼
why the pvc pipe for the copper?
Placing the copper pipe for algae control directly in the skimmer basket is optional, however, it tends to corrode. Placing it inside a PVC pipe prevents the copper degradation from staining any parts of the skimmer basket.