I tried this and I am impressed! Horrible year for Poa. No tenacity available to ship here so I used .5 ounces of Torocity and 6 ounces of Triad Tz mixed in 5 gallon bucket of water.. Sprayed again in 2 weeks. Boom, dead. I'll be doing this next spring before it emerges. Thanks for the video!
Man, I have been pulling them out by hand. Unfortunately they are taking over my lawn. I wish you posted this video earlier, I will keep it in mind. Thank you for all you do
Good info. Good to know that something works🤣. I’ve been hand pulling annua. I did find prodiamine in the fall helped in the spring too. Makes it hard if you need to overseed at some point though. Nice video Brandon!
Awesome info can't wait to try it I really wish I wasn't so into this grass game because I would have thought this was just weird looking grass years ago
i have used a weed torch (after rain while the grass is still wet) to kill poa in my tall fescue lawn. the fescue is of the RTF type. unfortunately it takes at least a month for the RTF is "heal" the burnt patches.
Awesome video.. I got so much Poa this year! Looking at some replies for clarification. You linked the Triad 4way but in the video show something else. I think all I need is the Triad and Tenacity?
Nice to hear a strategy for this! I'm just curious if it actually worked or did the summer heat just wipe it out? I have poa issues all over my property but by this time of year it is all pretty much gone naturally due to the heat. Hopefully next fall u see alot less of it due to your attack! Lol best of luck. I am gonna give this a go next year for sure
What rates did you apply at. I'm reading the triad application rate is (1.2 to 1.5 Fl oz per 1000 sq ft) so I use a syringe and that would be (35 to 44 ml per 1000 sq ft). Is that for a 1-gallon mix, 2-gallon mix of water or does water amount not matter. For tenacity I use (2.5 ml per 1-gallon water mix). I'm assuming combing it would be okay, but I want to know what rates per gallon of water you did to not harm the grass.
There are max rates and low rates stated on the label. Follow the label instructions and apply at the lowest rate for each product and tank mix them together. I simply followed the label rates and instructions.
I want to give your combination (Tenacity, Triclopyr Ester & Sulfentrazone 4F) a go at eliminating the poa annua in my tall fescue lawn here in Oregon. My question is about the use of a non-ionized surfactant. The Tenacity product says it requires a surfactant but the Sulfentrazone 4F product says "surfactants are not advised unless surfactant/sulfentrazone combinations have been previously proven to be safe to a particular turf variety." So, would you recommend using all three agents WITH a surfactant, WITHOUT a surfactant or do one application with only the Tenacity and the Triclopyr Ester in combination with a surfactant and then a second application a few days later with the Sulfentrazone 4F without any surfactant? I also plan to use Prodiamine 65WDG as a pre-emergent separately in the Fall and again next Spring. Thank you.
Hey, just checkin in a a couple years later. Are you still happy with the results from this mix? Starting to deal with a lot of Poa on my new lawn reno. Thanks
Yes! I am happy with the results on the poa annua. This process with burn the leaf tissue on triv but wont kill it. Glyphosate is the only option for triv. Also, I am not sponsored by any chemical companies, this process was recommended to me by reputable sports turf managers.
So you just used Tenacity and the Triad TZ mixture? Just want to be sure since you mentioned other chemicals. Can you please clarify that? Thanks for this cool video!
As a professional applicator, I can say Prodiamine is terrible at controlling Poa Annua. At least in the south. I have tried combining it with Simizine as well. Very bad results. I have seen better results with Dimension 2EW and one extremely expensive product is called Specticle Flo. That one is fire for preventing Poa Annua. Are you still having luck with Prodiamine in your cool season grasses?
Are you convinced your cocktail killed the poa not just the the heat? I’m in Seattle and my poa doesn’t die off in summer. It it stays all year. I need something that will kill it. Do you think your solution will kill it without the heat?
@@TurfCulture Did all of the triv come back? 100% as bad, worse, or you reduced the problem a little bit from when you sprayed? An update on this would be fantastic
Interesting stuff. Poa triv is extremely tough to kill besides Glyphosate and many have tried different things that they thought killed triv but it ended up coming back in the fall. Do you really think the triv in your yard was killed off?
@@TurfCulture How has this been working for you? spending literally hundreds of hours spraying, digging out, and reseeding all the poa triv patches I could find over the past year and recently pulling out 1000sq ft, I found another 10+ patches today that seem to be thriving after the cooler temps have hit and all the recent rain. I just can't keep up any more. I've come to the realization that triv loves the shady, wet areas. I basically give up. Curious to know if the areas you had triv and sprayed this mix are still dead or just were dormant and are coming back?
@@TurfCulture Checking in 7 months later to see how the poa trivialis patches are doing since your initial application. Do you think it worked well and the triv didn't come back?
If I use Prodiamine in the Fall and Spring, when can I use grass seed to fill in the dead spots from the Herbicide I used to kill the existing Poa that was in my lawn?
It would depend on the rates that you are using, if you apply a pre for 4 month control you are good to seed at that time and then continue with your pre application in the fall.
Im at the point where I will try anything. Just so I’m clear the 3 products you mixed together were Tenacity which is the mesotrione along with triclopyr and sulfentrazone mixed all together. Is that correct? Thanks for the video.
Hate to be the bearer of bad news but you'll get all of that triv back next spring. Tenacity does nothing to kill that. Best way I've done it is to kill it with roundup in the early spring and seed early enough so that the summer heat won't get to the new grass. Tenacity even mixed with the other chemicals is a waste of time.
So did you get any bleaching from so much tenacity? Also, I’ve been doing mini sod farms for patching. Plastic under-bed storage containers with some holes drilled, couple bags of soil, and seed. Self made sod patches of whatever seed you want!
Does this mixture stress out the current grass (cool season)? Mine is beginning to thrive and I don't want to upset it if it's wanting to spread out right now..while claiming some of the Poa space.
@@TurfCulture Thank you for the reply. It's been a few weeks so I can share my experience. I had about five patches of Poa Annua (the really seedy stuff) in my shady back yard. Honestly, i think my irrigation was set too high for the shady condition and created wet spots. It seems the Poa settled into the wet spots. When I first posted, I was almost a week into the first application of Tenacity + Triad. It was yellowing the POA slightly, but didn't seem to be killing it. I was probably a little light on the mix as I feared harming my turf grass. On the second application, I adjusted the ratio to about midpoint (between min and max). Wow, did that stuff die! The turf grass did bleach slightly around the edges, but is already showing recovery. I did not even bother to do the third application as I would have been spraying bare spots. I just reseeded the bare spots yesterday and am hoping for good germination. Next step will be trying to time preemergent to avoid having to deal with it again next year. For what its worth and hoping this helps someone!
Isn't a POA Constrictor a type of snake 😂. I actually had some Triv patches in my old lawn in the last year of it. Great video and solution if it should pop its ugly head in the future.
@@TurfCulture Since I did a full lawn reno last fall and knew I would have to seed bare patches come spring, I couldn’t apply pre emergent for poa (I did spray tenacity). It’s ok though, poa may be stubborn, but I’m more stubborn. Spent many hours this week hand picking all the poa. Nipping this in the bud before it takes hold. I’ve completely filled 6 5 gallon buckets and I’m about 75% done. I really hope this makes a huge dent on the poa population for the foreseeable future. Obviously, I will be applying pre emergent once my bluegrass fills in nicely and there’s no bare patches that need seeding.
The only real way is like you said at the end, pre emergent!! No need to apply herbicide first, its gonna die anyway. Seems wasteful and unnecessary. Nice video
Not available in CA? that sucks. Tried digging it out by hand, not good leaves bare spots. Darn it we just put new sod just 2 years ago and this spring, poa annua is hitting us big time
I tried this and I am impressed! Horrible year for Poa. No tenacity available to ship here so I used .5 ounces of Torocity and 6 ounces of Triad Tz mixed in 5 gallon bucket of water.. Sprayed again in 2 weeks. Boom, dead. I'll be doing this next spring before it emerges. Thanks for the video!
Awesome! I’m glad you went for it. I was taught this method by a group of excellent turf managers.
Man, I have been pulling them out by hand. Unfortunately they are taking over my lawn. I wish you posted this video earlier, I will keep it in mind. Thank you for all you do
No shame in mechanical control of it, the seed heads are the real kicker.
Did you use this spray?
Oh man! This is a great video! Well done, sir!
Thank you sir! Appreciate you watching and commenting!
Good info. Good to know that something works🤣. I’ve been hand pulling annua. I did find prodiamine in the fall helped in the spring too. Makes it hard if you need to overseed at some point though. Nice video Brandon!
Nothing wrong with hand pulling and then using a pre to control seed germination.
Awesome info can't wait to try it I really wish I wasn't so into this grass game because I would have thought this was just weird looking grass years ago
You can’t escape it now!
i have used a weed torch (after rain while the grass is still wet) to kill poa in my tall fescue lawn. the fescue is of the RTF type. unfortunately it takes at least a month for the RTF is "heal" the burnt patches.
And the POA is prone to come back because the plant is still alive, just has burned leaf tissue.
Great content as always. Did you use pre emergent in the effected area? I wondered how effective it was against poa.
No, only in post.
Awesome video.. I got so much Poa this year! Looking at some replies for clarification. You linked the Triad 4way but in the video show something else. I think all I need is the Triad and Tenacity?
Either use the triad and meso, or purchase each active ingredient separately.
Great suggestions!
Nice Info! You should try to make a mowing for beginners video.
Nice to hear a strategy for this! I'm just curious if it actually worked or did the summer heat just wipe it out? I have poa issues all over my property but by this time of year it is all pretty much gone naturally due to the heat. Hopefully next fall u see alot less of it due to your attack! Lol best of luck. I am gonna give this a go next year for sure
Both, time your applications accordingly. The more stressors the more effective the control.
Did u
Cool. If my plug strategy doesn't work, I may give this a go. Thx
Cool, what is the plug strategy?
@@TurfCulture th-cam.com/video/Yg1f1HpK-m8/w-d-xo.html
I see you linked tzone is that what you used? Or straight triclopyr? Also what about surfactant? I use one with tenacity but not sulfetrazone?
I linked Triad TZ it contains both active ingredients. You can use a surfactant if you want to.
What rates did you apply at. I'm reading the triad application rate is (1.2 to 1.5 Fl oz per 1000 sq ft) so I use a syringe and that would be (35 to 44 ml per 1000 sq ft). Is that for a 1-gallon mix, 2-gallon mix of water or does water amount not matter. For tenacity I use (2.5 ml per 1-gallon water mix).
I'm assuming combing it would be okay, but I want to know what rates per gallon of water you did to not harm the grass.
Same here. I’d like to know myself!
There are max rates and low rates stated on the label. Follow the label instructions and apply at the lowest rate for each product and tank mix them together. I simply followed the label rates and instructions.
@turfculture - checking in to see if the triv came back or if the combo ingredients worked well?
This method works wonderfully on poa annua, the only way to get rid of the triv is glysophate.
I want to give your combination (Tenacity, Triclopyr Ester & Sulfentrazone 4F) a go at eliminating the poa annua in my tall fescue lawn here in Oregon. My question is about the use of a non-ionized surfactant. The Tenacity product says it requires a surfactant but the Sulfentrazone 4F product says "surfactants are not advised unless surfactant/sulfentrazone combinations have been previously proven to be safe to a particular turf variety." So, would you recommend using all three agents WITH a surfactant, WITHOUT a surfactant or do one application with only the Tenacity and the Triclopyr Ester in combination with a surfactant and then a second application a few days later with the Sulfentrazone 4F without any surfactant? I also plan to use Prodiamine 65WDG as a pre-emergent separately in the Fall and again next Spring. Thank you.
Since you are applying at the low label rate you’re fine to add a surfactant.
Did the poa triv come back this year? Would you still recommend this for triv?
Hey, just checkin in a a couple years later. Are you still happy with the results from this mix? Starting to deal with a lot of Poa on my new lawn reno. Thanks
Look through the comments, he doesnt reply back anymore. My guess is he was paid from these companies and it didnt work
@@WeatherNut27 Lawn TH-camrs so shady lol. Saw someone reviewing "Velocity PM" without even using it. just reading the label lol
Yes! I am happy with the results on the poa annua. This process with burn the leaf tissue on triv but wont kill it. Glyphosate is the only option for triv. Also, I am not sponsored by any chemical companies, this process was recommended to me by reputable sports turf managers.
So you just used Tenacity and the Triad TZ mixture? Just want to be sure since you mentioned other chemicals. Can you please clarify that? Thanks for this cool video!
I was wondering the same thing as I have both products on hand.
Yes, it worked well on the poa annua but I do have some triv that has returned this spring. I will have to use a non selective for that.
@@TurfCulture what is a non selective to use for Triv?
@@chevystout5680glyphosate
As a professional applicator, I can say Prodiamine is terrible at controlling Poa Annua. At least in the south. I have tried combining it with Simizine as well. Very bad results. I have seen better results with Dimension 2EW and one extremely expensive product is called Specticle Flo. That one is fire for preventing Poa Annua. Are you still having luck with Prodiamine in your cool season grasses?
Prodiamine is only good for suppressing seed heads the following year.
When your applying the pre emergent are you not seeding in the fall?
No, you cannot do both.
Are you convinced your cocktail killed the poa not just the the heat? I’m in Seattle and my poa doesn’t die off in summer. It it stays all year. I need something that will kill it. Do you think your solution will kill it without the heat?
The annua did die, triv not so much.
@@TurfCulture Did all of the triv come back? 100% as bad, worse, or you reduced the problem a little bit from when you sprayed? An update on this would be fantastic
Interesting stuff. Poa triv is extremely tough to kill besides Glyphosate and many have tried different things that they thought killed triv but it ended up coming back in the fall. Do you really think the triv in your yard was killed off?
Probably not all of it, I’m expecting to treat for triv again next year and use a pre for and annua seeds that germinate next spring.
@@TurfCulture How has this been working for you? spending literally hundreds of hours spraying, digging out, and reseeding all the poa triv patches I could find over the past year and recently pulling out 1000sq ft, I found another 10+ patches today that seem to be thriving after the cooler temps have hit and all the recent rain. I just can't keep up any more. I've come to the realization that triv loves the shady, wet areas. I basically give up. Curious to know if the areas you had triv and sprayed this mix are still dead or just were dormant and are coming back?
@@jpzsports it’s a fighting battle but I think after two rounds of applications it is 99% under.
@@TurfCulture Checking in 7 months later to see how the poa trivialis patches are doing since your initial application. Do you think it worked well and the triv didn't come back?
@@jpzsports @turf culture Would love to know too. I just did my first application. It's got a pretty strong odor too.
If I use Prodiamine in the Fall and Spring, when can I use grass seed to fill in the dead spots from the Herbicide I used to kill the existing Poa that was in my lawn?
It would depend on the rates that you are using, if you apply a pre for 4 month control you are good to seed at that time and then continue with your pre application in the fall.
Im at the point where I will try anything. Just so I’m clear the 3 products you mixed together were Tenacity which is the mesotrione along with triclopyr and sulfentrazone mixed all together. Is that correct? Thanks for the video.
That is correct, this combination worked great on the poa annua, I have some triv coming back now and will likely have to use a non selective on that.
Hate to be the bearer of bad news but you'll get all of that triv back next spring. Tenacity does nothing to kill that. Best way I've done it is to kill it with roundup in the early spring and seed early enough so that the summer heat won't get to the new grass. Tenacity even mixed with the other chemicals is a waste of time.
Time will tell, seemed to work well for me.
@@TurfCulture Did
the poa triv all come
back?
Did it
Did it?
@@adamboettner4903 did it?
So did you get any bleaching from so much tenacity? Also, I’ve been doing mini sod farms for patching. Plastic under-bed storage containers with some holes drilled, couple bags of soil, and seed. Self made sod patches of whatever seed you want!
No bleaching issues here
@@TurfCulture awesome thanks for the reply.
I know this is from June 2022 but could you elaborate on the mix rates and what you used? I see the products linked but need more info.
Depending on which products you are using and the concentration of active ingredient I would suggest going off of the label at low rates.
Does this mixture stress out the current grass (cool season)? Mine is beginning to thrive and I don't want to upset it if it's wanting to spread out right now..while claiming some of the Poa space.
A little bit, this is why you want to apply lower rates but apply more often.
How long did it take after the application to see that the POA was starting to die?
next day I could tell the poa was starting to suppress.
@@TurfCulture Thank you for the reply. It's been a few weeks so I can share my experience. I had about five patches of Poa Annua (the really seedy stuff) in my shady back yard. Honestly, i think my irrigation was set too high for the shady condition and created wet spots. It seems the Poa settled into the wet spots. When I first posted, I was almost a week into the first application of Tenacity + Triad. It was yellowing the POA slightly, but didn't seem to be killing it. I was probably a little light on the mix as I feared harming my turf grass. On the second application, I adjusted the ratio to about midpoint (between min and max). Wow, did that stuff die! The turf grass did bleach slightly around the edges, but is already showing recovery. I did not even bother to do the third application as I would have been spraying bare spots. I just reseeded the bare spots yesterday and am hoping for good germination. Next step will be trying to time preemergent to avoid having to deal with it again next year. For what its worth and hoping this helps someone!
3 applications within 7 days....How much does your cocktail mixture cost?
1 application, every 7 days, 3 consecutive weeks at the low rate.
I need this info…I’ve been working on killing the poa in my lawn but it’s taking suck a long time…
Give it a go 👍🏻
How are you going to seed your thin spots but apply prodiamine?
You can time the applications appropriately, also amending the soil will break up the pre-m vapor barrier.
Did I hear that right. You applied tenacity every 7 days? 3 times?
Yes, yes you did.
Isn't a POA Constrictor a type of snake 😂. I actually had some Triv patches in my old lawn in the last year of it. Great video and solution if it should pop its ugly head in the future.
So did it come back this fall? Would love an update
No, it’s still under control but we’ll see what it looks like in the spring. I’ll do an update soon.
@@TurfCulture one yr later
@@CCCC-tq8yo still no POA
@@TurfCulture whow
Did you water in after each application?
You can water it in after a few hours
How much tenacity, triclopyr , sulfentrazone per 1000????…. Or , what exactly are you spraying?🤷🏻♂️
Must read the label, I’m spraying the recommended low rate of all three.
@@TurfCulture awesome, I’m going to give this a shot, I’m absolutely infested with the s*** this year! Thanks very much!
@@Mr1fingersaluteDid you give it a try? How did it work?
Wouldn’t the poa seeds still be viable even after you kill the plant?
Yes, that is why you would want to use a pre emergent in the fall.
@@TurfCulture Since I did a full lawn reno last fall and knew I would have to seed bare patches come spring, I couldn’t apply pre emergent for poa (I did spray tenacity). It’s ok though, poa may be stubborn, but I’m more stubborn. Spent many hours this week hand picking all the poa. Nipping this in the bud before it takes hold. I’ve completely filled 6 5 gallon buckets and I’m about 75% done. I really hope this makes a huge dent on the poa population for the foreseeable future. Obviously, I will be applying pre emergent once my bluegrass fills in nicely and there’s no bare patches that need seeding.
The only real way is like you said at the end, pre emergent!! No need to apply herbicide first, its gonna die anyway. Seems wasteful and unnecessary. Nice video
Poa roots don't die when the plant goes dormant.
@@MJorgy5 are you referring to Poa Triv or Annua?
These aren’t available in California. Any suggestions?
Dig it out by hand or invest in a Weeder tool.
@@TurfCulture thanks. Will Bermuda choke it out?
Not available in CA? that sucks. Tried digging it out by hand, not good leaves bare spots. Darn it we just put new sod just 2 years ago and this spring, poa annua is hitting us big time
Fortunately I have Bermuda which will creep in and cover bare spots
Quick clip of using a mixer. Power move.
Couldn’t help myself
Did it come back?
Triv came back, annua is gone.
@@TurfCulture that sucks, maybe ill do this to get rid of annua and then round up the triv
Those products are not available outside US.
Where is home for you?
@@TurfCulture I agree with t rex. You can't get this in EU. Do you know for any alternative or if someone is sending this to eu?
Sanford Island
I fought poa for years , I finally got smart and turned my entire lawn into a putting green , problem solved 😂😂😂😂😂😂😂😂😂👍
LOL@POA Constrictor
🤷♂️
Mow low and mow often..
Supression but not eliminate. Thumbs down. Click bait.
More context.