I am glad some of the keeb youtubers finally said that there is nothing wrong with stiff builds. I find them very nice for gaming, especially paired with some flat key caps.
If you like some uniform profile keycaps, try some DOYS keycaps. I just wish they had legends. I recently had these and have been enjoying them on a gaming board (but only if you know where stuff is without looking).
Glad to see this - my favorite board in my selection is a stiff, all-alu top-mount. I have some bouncy boards, but they aren't objectively better in any way. Overly-bouncy boards are big in the community now, but I can't help thinking they'll go from the end-all, be-all to a semi-popular option over the next year or so, in the same way super-tactile switches did a while back.
Just built mine today, the LED blocker can be removed and the black piece covers half, just remove it if you want the full LED. Thanks for the Video, Scott!
My board is arriving today, same finish and I'm also putting DCX Latte on it. Great to see what it would look like before building it! Thx for another fun review.
@@Keybored I installed Latte and used it for a couple days but replaced it with NK Copper. Finally a board that I think actually looks great with that set!
when i got around to building a board myself early last year and started seeing the trends towards all of this bounce and flex cut stuff it weirded me out tbh. I got the chance to try one out and was NOT a fan. I love the board i built with a very solid brass plate and minimal bounce.
imho stiff typing experience isn't bad as long as the bottom out isn't harsh. Some switches, the plate, and of course the mounting do make a difference. That brass plate and 1.6mm PCB are probably doing a lot of work to give this board big sound. Yet another interesting board providing good value and options.
I am trying to keep in rotation some of my older (and quite stiff) keyboards, trying to find which switches and keycaps improve the experience. I have a KBD67 Mark II with brass plate, as stiff as it gets, but I am enjoying it with some KTT Grapefruit switches. Funny thing is that neither the board nor the switches are top class, specially for today standards .. but they work quite OK together. I think it is interesting to upgrade or retrofit some of these old keyboard glories.
Newcomer to the hobby - where do folks with custom keyboards tend to sell them? Fb marketplace, Reddit? Have a neo65 and qk80 I’m looking to offload if I can
@@Finger-roll_Jonespersonally, i sell my stuff on facebook specifically public/private groups so people can vouch for one another and lessen the risks of being scammed 😅
Hey, love the vid, its so surprising hearing yours since there had been a few others I've heard that are way different, it might very much be the switch, and dang that's loud! Hearing others are tad bit softer, I thought it might've been due to the holes (sound leak instead of reverb), now convinced it's otherwise. Not sure if I'd pick one up for myself but glad to see the return of value sound-focus keebs, instead of screen+knob stuff under 200. Thanks for the vid scott! 😁
Yeah! I was surprised how loud and proud this thing was! I'm sure the tactile switches are playing a part here, but it Def wasn't as quiet as I initially thought!
The three holes in the bottom are, from what I heard, for the bluetooth wireless connection or it at least helps it. Most boards implement an antenna in the front facing side of the pcb or sometimes even on the plate. Instead this board has it on the bottom of the pcb
This is probably a hot take, but hear me out: this keyboard, latte/chai tea colour scheme keycaps, specialty coffee/tea cafe, and semi-transparent cashier stand.
The half lightbar is intentional, based on the pictures on the product page. In the group buy they will have one that has full light. I have one coming soon and got the sandwich plate... might actually try it out with some long pole switches, for fun.
As someone who realy likes the tactility of mechanical keyboard stiff is the way to go, even the weakest of flex gasket mount feels so terriblLY... weak. slap an alu (iron/steel even) plate mounted, non-flex PCB, tactile or clicky with no less than 70g actuation force? HEAVEN.
Thanks for this video. Mine just arrived today and I am still deciding if I would build this with the PC plate or the alu plate, but the alu plate I ordered was a conventional layout one so if I chose to build it with it, it won’t be the southpaw layout. Nonetheless, I am excited to build this!
appreciate the review Scott, definitely an impressive board for the price! That sandwich mount definitely gives me too mount vibes sound-wise! I’ll admit I’ve personally preferred softer plate materials in my top mount board (a Sonnet), but it’s all preference, and I definitely dig the crisp sound!
Yup! Im still amazed at the different options coming out and how we move around from one concept to another constantly! I thought this was a baby tenet at first and I realized it kind of looks like it, but are Def different
I dont know why or how (especially when I hate typing on screens/laptops/low profiles), but I hate bouncy/spongy keyboards. Drop the pcb on the table and i'm good to go :D So I think this would be a very decent buy for me, thanks Scott
I have to confess that I still don't get bouncy keyboards. They feel cheap under my fingers, like they might snap at any moment. I like stiff keyboards because they feel solid and sturdy. The correct amount of softness is usually provided by the switches themselves, for me.
Hey, going back to a "stiff" keyboard for a week, I didn't feel like it was torture or anything... I mean for my standard usage, it was perfectly fine!
maybe I'm just a follower of trends but I just bought a copper plate for my envoy, coming in later this week and can't wait to try the durock lupines on it.
Very interesting! Looks like with the right switches this could be a great board for gamers as you could use the F row on the side as macro keys. Was it VIA/QMK compatible? I think I missed that.
I've only had budget-premade boards, and they're all stiff. Can't imagine how cheap and imprecise a flexible board would feel. If your fingers hurt, type softer (and/or get stiffer/2 stage/progressive springs) you orcs!
“Some like it soft, some like it hard” Scott K 2024
I heard that and immediately opened the comments lol.
Hahaha
Literally came here to comment that lol!
"Some like it when they actually get killed. I mean, a head getting crushed between thighs kinda thing."
- Random space cowboy
I am glad some of the keeb youtubers finally said that there is nothing wrong with stiff builds. I find them very nice for gaming, especially paired with some flat key caps.
Yeah, it's all about preference and no right or wrong honestly!
If you like some uniform profile keycaps, try some DOYS keycaps. I just wish they had legends. I recently had these and have been enjoying them on a gaming board (but only if you know where stuff is without looking).
There’s actually a plastic piece under the led diffuser on the top case that can be removed to change the half lightbar to full.
Haha I have to try this!
Glad to see this - my favorite board in my selection is a stiff, all-alu top-mount. I have some bouncy boards, but they aren't objectively better in any way. Overly-bouncy boards are big in the community now, but I can't help thinking they'll go from the end-all, be-all to a semi-popular option over the next year or so, in the same way super-tactile switches did a while back.
Just built mine today, the LED blocker can be removed and the black piece covers half, just remove it if you want the full LED. Thanks for the Video, Scott!
just took the blocker out. still not sure what they were going for having it half blocked like that.
My board is arriving today, same finish and I'm also putting DCX Latte on it. Great to see what it would look like before building it! Thx for another fun review.
Looks gooood!
@@Keybored I installed Latte and used it for a couple days but replaced it with NK Copper. Finally a board that I think actually looks great with that set!
when i got around to building a board myself early last year and started seeing the trends towards all of this bounce and flex cut stuff it weirded me out tbh. I got the chance to try one out and was NOT a fan. I love the board i built with a very solid brass plate and minimal bounce.
This will be a good option for you!
imho stiff typing experience isn't bad as long as the bottom out isn't harsh. Some switches, the plate, and of course the mounting do make a difference.
That brass plate and 1.6mm PCB are probably doing a lot of work to give this board big sound. Yet another interesting board providing good value and options.
I am trying to keep in rotation some of my older (and quite stiff) keyboards, trying to find which switches and keycaps improve the experience. I have a KBD67 Mark II with brass plate, as stiff as it gets, but I am enjoying it with some KTT Grapefruit switches. Funny thing is that neither the board nor the switches are top class, specially for today standards .. but they work quite OK together.
I think it is interesting to upgrade or retrofit some of these old keyboard glories.
Absolutely right! The pairing is very important! Maybe I need to make a video about it
What mod would you recommend to address the rattle and loose sounding signature of the g915?
sold my qk75 and tofu for this and didnt regret it a single bit. truly a great work and play keyboard. this is my one-and-done
Def a unique layout but it works!
Newcomer to the hobby - where do folks with custom keyboards tend to sell them? Fb marketplace, Reddit? Have a neo65 and qk80 I’m looking to offload if I can
@@Finger-roll_Jonespersonally, i sell my stuff on facebook specifically public/private groups so people can vouch for one another and lessen the risks of being scammed 😅
I usually sell my boards on local fb pages dor both the seller and my security@@Finger-roll_Jones
@@Finger-roll_Jones i sell my stuff on facebook marketplace brother. imo, its easier for me to sell things locally
Hey, love the vid, its so surprising hearing yours since there had been a few others I've heard that are way different, it might very much be the switch, and dang that's loud! Hearing others are tad bit softer, I thought it might've been due to the holes (sound leak instead of reverb), now convinced it's otherwise. Not sure if I'd pick one up for myself but glad to see the return of value sound-focus keebs, instead of screen+knob stuff under 200. Thanks for the vid scott! 😁
Yeah! I was surprised how loud and proud this thing was! I'm sure the tactile switches are playing a part here, but it Def wasn't as quiet as I initially thought!
The three holes in the bottom are, from what I heard, for the bluetooth wireless connection or it at least helps it. Most boards implement an antenna in the front facing side of the pcb or sometimes even on the plate. Instead this board has it on the bottom of the pcb
Haha makes sense! I would like to think that they were cool enough to create holes for acoustics... You know just because hahaha
@@Keybored who knows maybe that was also an idea they had lolol. Would be interesting if that helped or hurt acoustics
Is it me or the keycaps sit more flush with the case when using the sandwich mount? Great video👍
The double entendre are masterful
Hahaha I tried :)
I need them to do an X98 r2, easily ny favourite version of the 1800/98% in recent memory. Hopefully they wait until I can afford it though :^)
This is probably a hot take, but hear me out: this keyboard, latte/chai tea colour scheme keycaps, specialty coffee/tea cafe, and semi-transparent cashier stand.
I created the flexi build but with Glorious pandas, very poppy as well.
I wonder if those vents in the bottom sound different if placed on a deskmat.
I'm sure it does since the mat actually covers them
Hey Scott where did you get that usb cable you use?
I wonder what this board would sound like with Cerakey caps.
Or the aluminum awekeys... Probably wild!
will you review the keychron v5 max next?
got this in the same color. doing a latte or chai themed keyboard is a great idea. might have to pick up those keycaps lol
Whats wrong with hard though cause i actually prefer hard ones
The half lightbar is intentional, based on the pictures on the product page. In the group buy they will have one that has full light.
I have one coming soon and got the sandwich plate... might actually try it out with some long pole switches, for fun.
Def will be loud! But not in a bad way lol
As someone who realy likes the tactility of mechanical keyboard stiff is the way to go, even the weakest of flex gasket mount feels so terriblLY... weak. slap an alu (iron/steel even) plate mounted, non-flex PCB, tactile or clicky with no less than 70g actuation force? HEAVEN.
My favorite design studio and keyboard content creator! And my DR-70F arrives today! HBD to me from the keeblords I guess 🎉
You won't be disappointed!
Thanks for this video. Mine just arrived today and I am still deciding if I would build this with the PC plate or the alu plate, but the alu plate I ordered was a conventional layout one so if I chose to build it with it, it won’t be the southpaw layout. Nonetheless, I am excited to build this!
I Def prefer the sound with the full alu plate in sandwich form... Not the softest that way, but Def wasn't uncomfortable
The three slots on the bottom of the case is for Bluetooth.
wrong its for sound daring run said it on their insta
appreciate the review Scott, definitely an impressive board for the price! That sandwich mount definitely gives me too mount vibes sound-wise! I’ll admit I’ve personally preferred softer plate materials in my top mount board (a Sonnet), but it’s all preference, and I definitely dig the crisp sound!
Yup! Im still amazed at the different options coming out and how we move around from one concept to another constantly! I thought this was a baby tenet at first and I realized it kind of looks like it, but are Def different
@@Keybored haha, yes, definitely get the Tenet vibes!!
I love you Keybored!
Thanks! Love you guys also!
That's like a machine gun? Damn. My oil kings in this tofu must be a galing gun!
I dont know why or how (especially when I hate typing on screens/laptops/low profiles), but I hate bouncy/spongy keyboards. Drop the pcb on the table and i'm good to go :D So I think this would be a very decent buy for me, thanks Scott
I have to confess that I still don't get bouncy keyboards. They feel cheap under my fingers, like they might snap at any moment. I like stiff keyboards because they feel solid and sturdy. The correct amount of softness is usually provided by the switches themselves, for me.
Hey, going back to a "stiff" keyboard for a week, I didn't feel like it was torture or anything... I mean for my standard usage, it was perfectly fine!
unpopular opinion: hard brass plate boards are the best.
Definitely unpopular, lol. But I have a 4mm brass plate in one of my boards, and I don't entirely hate it 😂
maybe I'm just a follower of trends but I just bought a copper plate for my envoy, coming in later this week and can't wait to try the durock lupines on it.
Let us know!
Used Latte for my wifes QK100 such a nice set
Stiff mounts are amazing for the sound
Yeah! Uses the whole keyboard to produce sound and not on modifiers like pe foam!
Appreciate the review of DR-70F, GB Sale Date: 1st Feb to 1st March 2024!!!
It was a great board!
Is this a new era of keybored, K-pop keybored, k bored?!
Haha Keybored Pop
Elitists when they watch this: *Impossible*
Wait what
Lol I guess depends on how old they are also
놀랬잖아요..ㅎ
재밌게 보고 갑니다~
봐주셔서 감사합니다!
A keyboard with its PCB mounted straight on the metal base......
Best intro fr
Haha thanks! I had to throw in a koala or two
I have one sandwich mount board, a TX75 v2 with a brass plate. Never again.
Haha I think if you go with a softer plate, may be ok!
Very interesting! Looks like with the right switches this could be a great board for gamers as you could use the F row on the side as macro keys. Was it VIA/QMK compatible? I think I missed that.
Yup! Supposed to be!
I was thinking the same
imho music was kinda loud, maybe fix that next time?
Was it? I thought I had it set the same as usual. I have to check
I like it!
Me too! Good clean sound
What a machine gun 😲🔫
Imagine throwing in even louder switches lol
Isnt a stiff keyboard just a normal one....
its the type 99.7% of people are using
Everything is beautiful but it's takes more space than a TKL😢
Yeah it does. I felt I needed to show the Mr. Suit next to it as reference
Most people use stiff keyboards all the time as membranes or scissors do not have any flex.
I've only had budget-premade boards, and they're all stiff. Can't imagine how cheap and imprecise a flexible board would feel. If your fingers hurt, type softer (and/or get stiffer/2 stage/progressive springs) you orcs!
I LOVE IT HARD :)
:)
hey man way you talking about which why my keyboard swings are you misgendering my keyboard 🤣🤣1:35
Hahaha
my keyboard is stiff
Stiff is diff
Haha Def is!