How to Perform Modal Analysis of a Simply Supported Beam using Ansys APDL 2019 r3 in easy steps??

Experiment 12 | What are the Steps required to do simple modal analysis of cantilever beam shown below | Modulus of Elasticity (E) = 206800 N/m2 | Density = 7830 kg/m3 | a=b= 0.01 m | L = 1 m | Compute the mode shape Diagram for each set of frequency and deflection | What should be the Preference while Solving Simply Supported Beam Problems in Ansys APDL | What should Pre-Processors while Solving Simply Supported Beam in Ansys APDL | What Should be Material while Solving Simply Supported Beam in Ansys APDL | How to add Cross Section of Bar while Solving Simply Supported Beam in Ansys APDL | How to Create KeyPoints using Modeling while Solving Simply Supported Beam in Ansys APDL | How to Mesh elements while Solving Simply Supported Beam in Ansys APDL | How to Define Load while Solving Simply Supported Beam in Ansys APDL | What are General Post Processing Steps while Solving Simply Supported Beam in Ansys APDL | How to Animate Analysis Results in Ansys APDL | How to Save Images of Results in Ansys APDL.
--------------------------------------------------------------------------------
About This Video
Hello Guys!!
I have made the video on Ansys Mechanical APDL Tutorial where I have Explain How to perform Modal Analysis on Simply Supported Beam in very easy Steps. I hope you Like this video and Subscribe my Channel.
--------------------------------------------------------------------------------
Queries Solved in this Video
1. What should be the Preference while Solving Simply Supported Beam Problems in Ansys APDL?
2. What should Pre-Processors while Solving Simply Supported Beam in Ansys APDL?
3. What Should be Material while Solving Simply Supported Beam in Ansys APDL?
4. How to add Cross Section of Bar while Solving Simply Supported Beam in Ansys APDL?
5. How to Create KeyPoints using Modeling while Solving Simply Supported Beam in Ansys APDL?
6. How to Mesh elements while Solving Simply Supported Beam in Ansys APDL?
7. How to Define Load while Solving Simply Supported Beam in Ansys APDL?
8. What are General Post Processing Steps while Solving Simply Supported Beam in Ansys APDL?
9. How to Animate Analysis Results in Ansys APDL?
10. How to Save Images of Results in Ansys APDL?
--------------------------------------------------------------------------------
Previous Video Link:- • How to Perform Modal A...
--------------------------------------------------------------------------------
Playlist
Ansys APDL 2019 R3 Playlist:- • Finite Element Analysi...
SolidWorks Tutorial Playlist:- • SolidWorks Tutorial Be...
Mechanical Joints Playlist:- • Mechanical Engineering...
FSAE Playlist:- • All About FSAE (Formul...
--------------------------------------------------------------------------------
Social Media Link
📷 Instagram :- simplerandomkn...
Facebook Page :- simplerandomkn...
Twitter :- simplerandomkn...
--------------------------------------------------------------------------------
HASHTAGS
#modalanalysis #simplysupportedbeam #ansysAPDL #finiteelementanalysis #ansysAPDLstructuralanalysis #ansys2019r3 #mechanicalengineeringsoftware #simplerandomknowledge

[@SimpleRandomKnowledge]

About This Video
Hello Guys!!
I have made the video on Ansys Mechanical APDL Tutorial where I have Explain How to perform Modal Analysis on Simply Supported Beam in very easy Steps. I hope you Like this video and Subscribe my Channel.

[@hassanzamirkhan7321]

hello there
there exists a similar problem on Ansys verification manual VM19: random vibration analysis on a deep simply supported beam. Please if you can also make a video on that ASAP. I am working on a project regarding that example. There are results given regarding that problem if you can just verify it in your videos for Modal and spectral analysis.

[@hassanzamirkhan7321]

I shall be very grateful to you

[@SimpleRandomKnowledge]

I guess you are using 2020 or 2021 version!? Because I received many comments from people using this version they are facing some or other warning or error.
I would suggest you to go with ansys 2019 r3 that's the stable version in present.

[@MrainSoheir]

please how to find longitudinale vibration frequency of bar in ansys