Please consider purchasing from the below links if you would like to support the channel. Your support is much appreciated! Thank you! Monitor Audio Bronze 100 in walnut (these are the ones I have): amzn.to/3utNvox Monitor Audio Bronze 100 in urban grey: amzn.to/3QUgIAi Monitor Audio Bronze 100 in black: amzn.to/3MWGra3 Dayton Audio DATs V3: amzn.to/3ZlG8L0 Speaker Switcher: amzn.to/3FEcGXs Brass nuts for the MA Bronze 100 can be found here: Brass nuts: amzn.to/3IFLOIS Brass nuts vendor 2: amzn.to/3BYrwq9 Brass lock washers: amzn.to/43iaRcK
8" inch woofer beams much earlier than 6.5 inch woofer MA used to use for bookselfs. It gains more bass, gives up some mid range sound dispersions. MA inflated prices from a few gererations of $599 to $1400. My silver RS1 had a MSRP of $599 and 6.5 inch woofer.
Great video, I enjoy your to the point, informative style. TS parameters and crossover analysis is great as well. Keep up the fabulous work. Have a happy new year!
I bought a set of Bronze 500 two months ago. They have a great balance across frequencies, at least in my Denon amped setup. Build quality is high, and I like that they use good quality internal wiring. I tried a lot of different brands and models, trying to find a replacement for my 23 year old JBL LX60s. It was much harder than I thought, but when I sat down and listened to the Bronze 500, I was convinced on the spot. The JBLs have a clear and broad soundstage, and I wanted to keep that, but add some more bass. Everything I tried before the Bronze 500 was too bass heavy, losing the open clarity I was used to. No doubt there are better speakers out there, but nothing at this price - and at the relatively modest footprint for a full tone floor standing, that doesn't need a sub.
I find this speaker to be great. I have 4 of them in my cinema, lcr and center rear. Surrounds will be replaced as soon as funds alow😊 It is flat down to 32 hz in my room (placement dependent). Sounds very detailed, open, yet powerfull enouch on its own for music. (I do have 3 subs to complement it though🙊).
I wanted an 8" bookshelf with front firing port do to placement restraint and bought the Klipsch RB-81II but had to buy a tube amp to soften the harsh Klipsch tweeter and the results were significant. Lots of bass and not fatiguing at all. The high efficiency of Klipsch speakers makes them perfect for tube amps and totally fixes the ear piercing tweeter. Just an FYI for you Klipsch fans
There is definitely some cool original features to that speaker. I like how the woofer is attached, I agree this should help brace the cabinet, I also like the plastic woofer basket, to me this is better than a stamped steel basket, it also looks like they did more than most companies when it comes to the internal foam 👍🏻 and the overall look to the speaker is much better than most. The plastic front baffle was a surprise. But I think it adds to the look and design. Very cool!
I thought so too. These speakers are currently on sale for under $600 a pair and I think they offer tremendous value for money at that price. The fit and finish was definitely above average for this price point. My only grip with them is that I do wish the 8" driver had more bass. I'll talk more about this in my review video which will be out on 1/15/24.
Got mine in an open box condition with a couple of scratches from an UK retailer a couple of years back for 230 GBP. I drive them with an Audiolab 8300A and I don't feel they need more bass except when watching movies. They're about 1ft away from the wall as I don't like them to hang out too much away from the wall.@@generationbehindhifi
@@generationbehindhifi It seems tuned very low, with the lower peak almost at 20Hz and 36Hz cabinet. May benefit from being closer to walls. MA also tends to go for "clean" bass and very slightly enhanced detail response
if that is true, then the industry is bananas. the silver model is X2 the price of bronze. Maybe we can sell the crossover from the silver to ppl that bought the bronze for a profit @@allwayzactive4599
I’ve read in several places that the Silver 100’s are in a league of their own. Blow the Bronze away. I’ll probably get the Silver’s soon. The reviews I’ve seen were very compelling.
It is possible that the Q150 crossover is 2nd order - if it is a series design. If the positive binding post is connected to both the coil and the resistor, and the other lead of the resistor connects to the tweeter - and the other lead of the coil connects to the cap AND the other side of the tweeter AND the woofer - and the other lead of the cap connects to the other lead of the woofer AND to the negative binding post - THEN it is a series crossover. If you can look at the circuit board, it would be very interesting to see if it is a series or parallel XO. This Bronze 100 speaker appears to have a 2nd order (parallel) filter on the drivers, and a notch filter on the woofer?
I like what you do very much, thanks for the video. One critisism though: I think your living room has a strong reverb and since your mic is not close to you when you speak, there is quite a strong reverb on the recording. It has nothing to do with the content you do, which I like. But it would me much better to listen to if there wasn't that much reverb.
Thank you and I appreciate the feedback! No doubt my room is in desperate need of some room treatment. A new mic is definitely on the list of items to purchase.
i found it quite amusing to me that a guy reviewing the tiniest details of a speaker didn't find a place that doesn't sound like an echo chamber, lol. no hate, it just made me smile
This 🔊 speaker is perfect for a subwoofer upgrade, can you recommend any . I recently put in a 6 .5 Skar audio into some old 2600 JBL & those suckers 🔊💨
Sorry! I haven't done any modeling on the MA100 Bronze so can't recommend anything. I also think it will be tricky to mess around with the drivers because of the proprietary mounting design. The woofer is held in place by a long thread bolted that is installed from the rear cabinet wall.
3:52 I don't think it's made from paper. That's just an outer layer found on many VC formers; usually they are aluminium underneath. Modern drivers sometimes have fibreglass formers
I don't like the idea that the mounting bolt is basically pulling away the magnet from the basket. I think it's pretty big weakpoint and classic construction using bolts through front of the basket is much more solid idea.
I appreciate the comment! Bowers Wilkins has been mounting their midrange and tweeter for decades like this on their 800 series. IMO if done right, it should provide more mass and reduce resonances because you're essential tying the front baffle to the rear. In theory it sounds great but I don't have the measuring equipment to determine if its really effective or not. I would assume so since B&W has been incorporating it into their designs for so long (Since Nautilus series).
I bought 2 pairs of them for side and rear surrounds, at £250 a pair, saw them in a sale, and pulled the trigger fast, very happy with them, I have Monitor Audio Bronze 500 L/R and Monitor Audio Gold C350 Centre.
As a former owner, I can attest that the Focal aria 906 has a cheap crossover that says $299 a pair, not $2200 a pair. The AL/MG tweeter is a cheap version of focals better lines. It has over ring and an unrealistic treble. A $30 vifa tweeter is far superior. Sounds to me like the speaker caps are saturating easily at higher volumes. I got rid of mine, and consider them inferior to a few $499 a pair speakers, because...they are.
Cmon chum...You can put thje effort into removing the tweeter for us. Good content , but, you really put me off with that comment bout no time for the tweet!
I thought the picture he provided was all the information I needed. I am happy for these teardown videos. There really isn’t allot of other channels doing this. At least not this consistently. And we can learn allot about a speaker this way and I think it can keep the manufacturers honest
Please consider purchasing from the below links if you would like to support the channel. Your support is much appreciated! Thank you!
Monitor Audio Bronze 100 in walnut (these are the ones I have): amzn.to/3utNvox
Monitor Audio Bronze 100 in urban grey: amzn.to/3QUgIAi
Monitor Audio Bronze 100 in black: amzn.to/3MWGra3
Dayton Audio DATs V3: amzn.to/3ZlG8L0
Speaker Switcher: amzn.to/3FEcGXs
Brass nuts for the MA Bronze 100 can be found here:
Brass nuts: amzn.to/3IFLOIS
Brass nuts vendor 2: amzn.to/3BYrwq9
Brass lock washers: amzn.to/43iaRcK
8" inch woofer beams much earlier than 6.5 inch woofer MA used to use for bookselfs. It gains more bass, gives up some mid range sound dispersions.
MA inflated prices from a few gererations of $599 to $1400. My silver RS1 had a MSRP of $599 and 6.5 inch woofer.
Great video, I enjoy your to the point, informative style. TS parameters and crossover analysis is great as well. Keep up the fabulous work. Have a happy new year!
Thanks! I really appreciate the kind words. 🙏
I bought a set of Bronze 500 two months ago. They have a great balance across frequencies, at least in my Denon amped setup. Build quality is high, and I like that they use good quality internal wiring.
I tried a lot of different brands and models, trying to find a replacement for my 23 year old JBL LX60s. It was much harder than I thought, but when I sat down and listened to the Bronze 500, I was convinced on the spot. The JBLs have a clear and broad soundstage, and I wanted to keep that, but add some more bass. Everything I tried before the Bronze 500 was too bass heavy, losing the open clarity I was used to.
No doubt there are better speakers out there, but nothing at this price - and at the relatively modest footprint for a full tone floor standing, that doesn't need a sub.
8 inch woofers in a bookshelf were common in 1980s. Now it's unique.
unless paired with bigger waveguide, there will be most likely discontinuity in directivity.
Klipsch rb 81mk2 has a same 8" woofer
I find this speaker to be great. I have 4 of them in my cinema, lcr and center rear. Surrounds will be replaced as soon as funds alow😊
It is flat down to 32 hz in my room (placement dependent). Sounds very detailed, open, yet powerfull enouch on its own for music. (I do have 3 subs to complement it though🙊).
Perfect review. I have a 2 pairs of those. I rock it with my old stereo receiver marantz sr4021. And the sound is powerful
I have these and they are pretty good!
I wanted an 8" bookshelf with front firing port do to placement restraint and bought the Klipsch RB-81II but had to buy a tube amp to soften the harsh Klipsch tweeter and the results were significant. Lots of bass and not fatiguing at all. The high efficiency of Klipsch speakers makes them perfect for tube amps and totally fixes the ear piercing tweeter. Just an FYI for you Klipsch fans
I had no idea that Klipsch had made a 8" bookshelf model. Very cool! I'm a big fan of big driver bookshelf speakers! Thanks for sharing!
Great sound, great cosmetics, bought over B&W Speakers. Better sounding. Highly recommended for Stereo & home theater.❤
Awesome video! Looking forward to your listening impressions
Thank you!
There is definitely some cool original features to that speaker. I like how the woofer is attached, I agree this should help brace the cabinet, I also like the plastic woofer basket, to me this is better than a stamped steel basket, it also looks like they did more than most companies when it comes to the internal foam 👍🏻 and the overall look to the speaker is much better than most. The plastic front baffle was a surprise. But I think it adds to the look and design. Very cool!
I thought so too. These speakers are currently on sale for under $600 a pair and I think they offer tremendous value for money at that price. The fit and finish was definitely above average for this price point. My only grip with them is that I do wish the 8" driver had more bass. I'll talk more about this in my review video which will be out on 1/15/24.
Got mine in an open box condition with a couple of scratches from an UK retailer a couple of years back for 230 GBP.
I drive them with an Audiolab 8300A and I don't feel they need more bass except when watching movies. They're about 1ft away from the wall as I don't like them to hang out too much away from the wall.@@generationbehindhifi
@@generationbehindhifi It seems tuned very low, with the lower peak almost at 20Hz and 36Hz cabinet. May benefit from being closer to walls.
MA also tends to go for "clean" bass and very slightly enhanced detail response
@@generationbehindhifi Also a tip for your channel, maybe link your reviews in the teardown video so it's easier to find
It would be great to see how the Silver 100s are built in comparison to these and whether this manifests in a big difference in sound quality.
I bet it's the same just different crossover
if that is true, then the industry is bananas. the silver model is X2 the price of bronze. Maybe we can sell the crossover from the silver to ppl that bought the bronze for a profit
@@allwayzactive4599
I’ve read in several places that the Silver 100’s are in a league of their own. Blow the Bronze away. I’ll probably get the Silver’s soon. The reviews I’ve seen were very compelling.
Monitor Audio is a quality brand
I agree! I'm impressed with the Bronze 100.
Lol nope
A plastic basket isn't quality 😂
@@AndrewB23 Considering that I will listen to music and not to the plastic basket, I'm good with that. 😊
excelent video! great job
Thanks! I really appreciate that!
between kef q350, monitor audio bronze 100 and Elac Debut 3.0 DB63 what would you choose? thank you very much!
Hi sir....how i can change the steel terminal.....and which one i need
Check the description.
It is possible that the Q150 crossover is 2nd order - if it is a series design. If the positive binding post is connected to both the coil and the resistor, and the other lead of the resistor connects to the tweeter - and the other lead of the coil connects to the cap AND the other side of the tweeter AND the woofer - and the other lead of the cap connects to the other lead of the woofer AND to the negative binding post - THEN it is a series crossover. If you can look at the circuit board, it would be very interesting to see if it is a series or parallel XO.
This Bronze 100 speaker appears to have a 2nd order (parallel) filter on the drivers, and a notch filter on the woofer?
I like what you do very much, thanks for the video. One critisism though: I think your living room has a strong reverb and since your mic is not close to you when you speak, there is quite a strong reverb on the recording. It has nothing to do with the content you do, which I like. But it would me much better to listen to if there wasn't that much reverb.
Thank you and I appreciate the feedback! No doubt my room is in desperate need of some room treatment. A new mic is definitely on the list of items to purchase.
i found it quite amusing to me that a guy reviewing the tiniest details of a speaker didn't find a place that doesn't sound like an echo chamber, lol. no hate, it just made me smile
This 🔊 speaker is perfect for a subwoofer upgrade, can you recommend any . I recently put in a 6 .5 Skar audio into some old 2600 JBL & those suckers 🔊💨
Sorry! I haven't done any modeling on the MA100 Bronze so can't recommend anything. I also think it will be tricky to mess around with the drivers because of the proprietary mounting design. The woofer is held in place by a long thread bolted that is installed from the rear cabinet wall.
3:52 I don't think it's made from paper. That's just an outer layer found on many VC formers; usually they are aluminium underneath.
Modern drivers sometimes have fibreglass formers
I don't like the idea that the mounting bolt is basically pulling away the magnet from the basket. I think it's pretty big weakpoint and classic construction using bolts through front of the basket is much more solid idea.
I appreciate the comment! Bowers Wilkins has been mounting their midrange and tweeter for decades like this on their 800 series. IMO if done right, it should provide more mass and reduce resonances because you're essential tying the front baffle to the rear. In theory it sounds great but I don't have the measuring equipment to determine if its really effective or not. I would assume so since B&W has been incorporating it into their designs for so long (Since Nautilus series).
If only any MB speakers sounded good?
My review video where I go over the SQ of the MA Bronze 100 will be out 1/15/24.
what speaker sounds better at the same price?
😮😮449$ to 549€ per pair!! Coming from England. 🤔🤔🤔
Amazon has them for sale for that price too! Phenomenal value for money!
I bought 2 pairs of them for side and rear surrounds, at £250 a pair, saw them in a sale, and pulled the trigger fast, very happy with them, I have Monitor Audio Bronze 500 L/R and Monitor Audio Gold C350 Centre.
Aria 906 are 1000 euros in france
As a former owner, I can attest that the Focal aria 906 has a cheap crossover that says $299 a pair, not $2200 a pair. The AL/MG tweeter is a cheap version of focals better lines. It has over ring and an unrealistic treble. A $30 vifa tweeter is far superior. Sounds to me like the speaker caps are saturating easily at higher volumes. I got rid of mine, and consider them inferior to a few $499 a pair speakers, because...they are.
😂 😂 😂
Plastic Composite basket for the woofer stopped me here . .....
A plastic basket is not a quality choice: it is only a the cheapest one
A plastic composite basket does have its benefits in terms of resonance vs stamped steel, but I see your point. Time will tell if they last.
Xem video của bạn rất chóng mặt, camera cứ di chuyển liên tục.
H can’t say out ,but this is a cheap speaker with CHEAP parts
A plastic woofer basket for a $725 pair of speaker 😂😂😂
Cmon chum...You can put thje effort into removing the tweeter for us. Good content , but, you really put me off with that comment bout no time for the tweet!
Sorry! I did the best I could with the time I had. Next time I'll think of your comment when I don't want to pull the tweeter. 🙂
I thought the picture he provided was all the information I needed. I am happy for these teardown videos. There really isn’t allot of other channels doing this. At least not this consistently. And we can learn allot about a speaker this way and I think it can keep the manufacturers honest
Plastic lasts forever
That's a bold claim. I have cars with plastic cooling systems that can't even last through the warranty. Just saying. 🙂