@@matthewcooper3774 You have to go to the site mentioned in the instructions to find it. And those directions mentioned in this thread are not complete. After all 3 leds are flashing you have to release, then press and hold again until all 3 are solid. If you don't do that the setting is not saved.
Hi there, thank you for the video. Every step worked for me except the last one where motion in front of the sensor is not activating the lights. Any trouble shooting advice?
Did do you find that after messing with things manually (turning on/off the lights the sensor is supposed to control, or testing the auto-on/off in the app) that the motion sensor was unresponsive for a long time afterward? I assume it's so that it doesn't just immediately trigger again if you set something manually, but I haven't found any documentation on this so it's hard to know if it's working or if it's a defective unit.
Mine doesnt work. The test button works fine, red light turns on and off when movement is detected. The bulb button works as well.. turns on/off lights. BUT other than that, it doesn’t work. I move around the space and lights wont turn on. It’s set to Auto-ON What am I doing wrong ???
You can also set it the timeout to 1 minute by holding it down for 10 seconds until all three LEDS flash
This is why I came to this video
Exactly what I’m looking for. The video should be remade with this addition.
Thank you! It did not say in the instruction manual how to set it for 1 minute.
@@matthewcooper3774 You have to go to the site mentioned in the instructions to find it. And those directions mentioned in this thread are not complete. After all 3 leds are flashing you have to release, then press and hold again until all 3 are solid. If you don't do that the setting is not saved.
Great video! It helped me to configure the sensor! It is working flawlessly now!
This is exactly what I wanted to know. Thanks!
Do you have to have a switch t e room for it to work?
Do they make any outdoor motion sensors that work with Caseta Lutron light switches?
Hi there, thank you for the video. Every step worked for me except the last one where motion in front of the sensor is not activating the lights. Any trouble shooting advice?
I have the same issue.
same
Did do you find that after messing with things manually (turning on/off the lights the sensor is supposed to control, or testing the auto-on/off in the app) that the motion sensor was unresponsive for a long time afterward? I assume it's so that it doesn't just immediately trigger again if you set something manually, but I haven't found any documentation on this so it's hard to know if it's working or if it's a defective unit.
Mine won't auto trigger back on if I manually turn off
The install guide says you can set this auto-off timer to 1 minute, is that true?
Does that fit within a wall plate? Looks big.
Trust your eyes. No, it doesn't fit there.
Does this need the hub connected? When I install the app on my phone it is asking for my home wifi network, so I assume it is looking for the hub.
👏🏽👏🏽👏🏽
what's the difference between this one, Smart Motion Sensor (Occupancy/Vacancy) and the other one, Smart Motion Sensor (Vacancy-Only)?
Mine doesnt work.
The test button works fine, red light turns on and off when movement is detected. The bulb button works as well.. turns on/off lights.
BUT other than that, it doesn’t work. I move around the space and lights wont turn on. It’s set to Auto-ON
What am I doing wrong ???
Same... The f. Did you fix it?
same
what if I want to turn on 2 or 3 rooms, it dont let me do it
So frustrating. Wont auto off or auto on... Sensor is working as its showing motion but wont teigger the lights...