How to replace brake light on 2008-2012 Jeep Liberty

[@jasonyoung182]

Well this couldn’t have been a better video. Straight to the point and easy instructions. Thank you!

[@marksickmiller]

Thanks! Glad I could help

[@ConnieSanchez]

Thanks! Changing my bulb before I get pulled over.

[@marilynhernandez3809]

Thank you been telling my husband for weeks to change the light. Today going to buy the bulb and change it myself.

[@marksickmiller]

Did it work?

[@Keisha_Jenkins]

Thank you so much! I was just pulled over for my break light being out and I didn't want to go to a mechanic and have them charge me for something I can do myself. ❤

[@robynbrown5076]

Thank you so much these are very helpful for women too..

[@24Wicked601]

You’re the best! Thank you so much! Just changed my brake light without having to ask my dad or mechanic! So appreciated!

[@ProducerSolo]

Thank you. After this insanely tough job I am now an official youtube mechanic. It was an honor learning with you.

[@rmz5667]

😂

[@Luckysquirrel1256]

Thanks! Straight to the point and was able to change the bulb in less than 5 mins.

[@bravobullz7475]

Good video one thing though wear rubber gloves when touching new bulb
Any finger prints will significantly reduce life of bulb

[@melissacortijo1420]

This video helped out so much and gave me confidence. Easy Peasy ! Thank you

[@andreapaganomusic826]

Yo thanks man took me five minutes your tutorial was amazing
I just got a little bit lost when I had to put it back but I figured out .. very simple
Thanks !!🎉

[@mypenguins5553]

Thanks for the easy fix-from one happy Jeep owner to another,,

[@marksickmiller]

Glad to help

[@apehugo3511]

This helped me but I took out the thing that holds the light a little to hard and broke my reverse light 😂 at least I know how to fix that now too, thank you !

[@larrybyrd3210]

Wear gloves. Some bulbs are halogen which will bust if oils are on tye bulb

[@justSTUMBLEDupon]

Wonder why they made it do difficult to change out? Why need a special bolt?

[@kenbarker3171]

Very well organized, comprehensive, and right to the point video.
Thank You Mark

[@DrinkmoWater.]

Exactly same color ride too nice thank you for showing the needed tooIs it helps

[@MikeSullivan8548]

Awesome. Thanks for the video. Short and to the point.

[@marksickmiller]

You're welcome, Mike!

[@meanpeatube]

I love you tube. And now I love you. Thanks heaps!

[@marksickmiller]

You're welcome!

[@lonephoenix7814]

Thanks! you saved me an expensive trip to my dealer!

[@marksickmiller]

You're welcome!

[@preciouscello376]

Thanks very easy! I'm using this right now.

[@marksickmiller]

Great!

[@robertkline3856]

Easy peasy, gonna get out to the garage and replace that bulb...thanx man!!!

[@marksickmiller]

Yep there's not much to it! Good luck

[@afferdin]

Thanks! Helped a lot! :)

[@marksickmiller]

That's great to hear! It's a fun little job

[@stevenjohnson5641]

This was so helpful!! Replaced the rear and reverse bulbs on my Liberty yesterday. So easy!!! A million thumbs up!! Thanks for posting!!!!

[@GoddessNijaIkande]

Could a wrench be used if i dont have a power tool?

[@stevenjohnson5641]

I used a manual socket wrench and it worked just fine.

[@marksickmiller]

@@GoddessNijaIkande yes

[@cbag0805]

great video, thanks for the help!

[@joecasalena8263]

You just save me probably an hour and a half

[@352ish]

Thank you. Not supposed to touch the bulb bare handed tho. Thanks again

[@marksickmiller]

Yeah, so I've been told.... after I made the video. I'll wear gloves from now on

[@bradclasgens]

Thanks for this. Every step feels like you’re going to break something. Who designed this monstrosity? Very helpful to follow along.

[@marksickmiller]

Haha. It reminds me of a Fisher Price toy

[@RaulRodriguez-uz4cv]

Pretty simple thank you 👍🏼

[@Motus_pecunia]

thank you Mark . Very helpful, in fact, I change the right brake light of my JEEP LIBERTY this morning after watching your post!!!!

[@shaunhall3155]

What do you call the black piece that the 3 bulbs sit in...how do I replace that black piece as the light doesn't work but the bulb is fine

[@Dean-t1t]

10 mm socket a t20 star bit

[@spodergaming339]

My son has 2010 jeep liberty, was hit in back left taillight cracked, all bulbs work but brake light won't work, what could it be

[@alanc745]

Off topic but my 2010 is worst 4wd I've owned the traction control sucks worthless in snow that deeper than the frame and that low damn front bumper is something else..nice job engineer!!!

[@iyoutome]

Thanks brother, really simple and straight forward...

[@angeldyc]

Thanks a lot man ❤

[@johnmorley4138]

Mark, Very helpful, in fact, I change the right brake light on my JEEP this morning it took me 15 minutes. Breakdown of tools required was very helpful.

[@marksickmiller]

Great to hear!

[@UncleAir]

Need to do mine now. This video is a lifesaver

[@marksickmiller]

@@UncleAir It's so easy! Let me know if you have questions

[@vquirozmail]

Thank you so very much.

[@islandboy35205]

Thanks dude

[@brentandrews6960]

Thanks!

[@nickk.6469]

Should you happen to know what size bolts are needed to replace the ones for the T20?

[@lucymoorman]

Thank you so much for making this easy for me while my husband was down

[@bryanspencer6818]

I've changed the balb but it doesn't eliminate could it be the socket the balbe goes into?

[@Triniman1973]

Thanks so much for the video...bulb change tomorrow.

[@Alightinadarkplace]

Good video, very helpful thanks.

[@Kcheeseboro]

One screw came out perfectly but the other was stripped and won't come out. Any advice?

[@marksickmiller]

Douse the screw in WD40 or PB BLASTER. Let it soak for 10 min then repeat. Then see if you can use needle nosed pliers to untwist the screw. There should be enough metal to grab hold of

[@KeniBey]

Thank you for getting straight to point and making this so easy to do that even I can do it.

[@marksickmiller]

You're welcome!

[@iamKelvinJ]

Great video

[@JeffStewart1759]

How often should I expect to change my brake lights?

[@marksickmiller]

Just whenever they burn out, every few years. I check mine every oil change.

[@jimboswamps5602]

Mark, you rule! 💪🏻 Thanks man!

[@marksickmiller]

I appreciate that! Happy I could help!

[@joshbeyers3794]

Gloves but thanks for the vid

[@marksickmiller]

Yeah, gloves are best I suppose. I think if I get my fingers dirty enough they have a protective coating. You're welcome!

[@joshbeyers3794]

@@marksickmiller I feel the exact same way 😆

[@CarrierDeck]

Thank you Mark - just replaced a bulb on my UK 2010 Liberty following your instructions - perfect!

[@marksickmiller]

You're welcome, glad you're street legal!

[@w.tibbsclemens636]

Thank you

[@marksickmiller]

You're welcome!

[@chippalko5592]

This video helped a lot. Thanks

[@elizabethkanous9086]

Great video. Good to know that you need just the right amount of muscle to pull out the housing and to line it back up to make it pop back into place :-) Thanks,

[@marksickmiller]

Yep, and it's pretty satisfying to pop it back in there. You're welcome

[@erik472]

Great video. I'm gonna fix the wives blown bulb on her 08 using this information.

[@marksickmiller]

Thanks! Happy I could help

[@miakbrzozowski3409]

Thank you -- your tutorial saved me some money!

[@marksickmiller]

Glad it helped!

[@jimthumerzs2301]

But how does one disconnect the circuit board from the wiring harness? I can't find any push clips on the connector.

[@marksickmiller]

Hi, you don't need to disconnect the wiring harness in order to change the light bulbs.

[@TheDarksider15]

Hey Mark do you know how to properly remove the taillight circuit board I need to replace it because one of my bulbs burnt out and melted the circuit board housing. I'd appreciate the response great video by the way.​@@marksickmiller

[@luisalberto7425]

Thanks, from Chihuahua

[@TonysBrickHouse]

Thanks this helped alot

[@raymondwisden3055]

Thank you very much for video!!

[@marksickmiller]

You are welcome! Happy Jeeping

[@sheilablackburn9714]

Thank you🙂

[@caseypfeiffer1601]

Both my bulbs went out on the way to my e-check. 🤷🏻‍♂️

[@Turk_2023]

thanks

[@melrosehawkins1845]

Nice video. Thanks. Anybody doing might want to try to avoid getting oils from fingers on to bulb. Maybe wear some kind of gloves.

[@marksickmiller]

Yeah, agree. In my defense my fingers were so dirty I'm not sure any skin oils could get through!

[@frisky370]

Thank you! Feeling self sufficient!!

[@08nickyJO]

What is that piece that holds all the lights?

[@thomasschaub8638]

Very helpful. Thank you

[@marksickmiller]

You're welcome! Glad I could help.

[@tipplers3417]

Thanks so much Mark

[@marksickmiller]

My pleasure, light bulbs are my passion

[@Divaciss]

Thank you

[@HaydeeCaz]

Thank you so much!

[@marksickmiller]

You're so welcome!

[@terrymutant3581]

Thanks..

[@marksickmiller]

Yep!

[@rondoschiavoni8840]

WHEN YOU REPLACE THE BULB IT CAN GO IN EITHER WAY 180* TURNED AROUND WHICH IS THE RIGHT WAY?

[@marksickmiller]

Rondo Schiavoni either way

[@rondoschiavoni8840]

THANKS MARK

[@rondoschiavoni8840]

worked great thanks for your video.

[@jpetrie1026]

Thanks

[@mrugly73]

THANKS FOR THE help 🦄🦄👍👍