ฝัง
- เผยแพร่เมื่อ 18 ก.พ. 2013
- HOT TAPPING WITH TONISCO B30 USING FLANGED WELDABLE TEE AND FLANGED GATE VALVE
TONISCO Hot Tapping Systems offer an Easy and Safe solution for all kind of different hot tapping needs. TONISCO Hot Tapping Devices can be used with Flanged (both ANSI and DIN standard Flanges) and threaded valves (both outer and inner thread adapters are possible). If you are using some special valves do not hesitate to contact our Sales and ask for a special adapter just for your valves. TONISCO Hot Tapping systems are Designed to be as flexible as possible and that Customers could drill trough as many different valves as possible. Hot Tapping range of TONISCO B30 is from 3/4" (DN20) to 8" (DN200)
In this Case shown on the video, TONISCO Hot Tapping staff demonstrates how to do a DN 100 Hot Tapping to a Stainless mainline trough a standard PN 10 Gate Valve. This kind of a solution could be suitable for example in water distribution and in Cooling Systems at Industry - วิทยาศาสตร์และเทคโนโลยี
Not sure why I sat through that. But I learned a new skill ill never ever need
METAL SAMPLES is the best hot tap tool known to man, we just got it up here for the Arctic Oil lines and it is flawless!!! EVEN IN -50 BELOW !!!!!!!!!!!!!!!!
Where were you working at ?
As tedious as the task is it is very important to ensure the sound track is included with every tool purchase.
I've done about 7 hottaps in my day it's scary when you first light up. the welding inspector ut'ed the pipe(that's to check how thick it is) I asked him to stick around while I first lit up, should of seen the look on his face... he did stay...12 " weldolets took most of the day...... 342 retired.
awesome
very nice
Hi , What type of drill is being coupled to the shaft ?
Jamming out to hot tapping music.
The background muzak... do I have to play it out loud while tapping, or can I have it through my headphones???
The pilot drill did not appear to have a retaining clip that secures the the coupon that the whole cutter creates ? if not its going in the system.
Yeah it was the kind that have the wire that tucks into a slot on the side of the bit. They suck as the wire usually doesnt come out when you need it too.
this seems like such a complex procedure. i didnt notice any torquing and perhaps one measurement taken. how come the flange on the tapping machine has far less bolt holes than the flange on the valve?
No pressure on that side
And why would you do this demonstration on SS pipe? One good way to burn up a bit and hole saw.
"Carrie on drilling"? With spelling and proofreading like that I wouldn't let you unclog my toilet.
Just waited to see if remembering to open the valve was in the instructions!!!.....tapping thru 2 gates a stem and the pipe make for a real bad day .....don't laugh....it's been done more times than u would ever believe!!! Personally, I would have opened that valve before doing anything else....my second check of valve position would have been when I measured cutter travel thru the valve body not outside of it.
Esto es para una perforación muy ligera, Y demostrarlo en una linea viva. NO convencido.
Bu kadar şey için bir video bu kadar uzatılmaz insanların zamanını çalmak demektir bu ben bu videoyu kimseye tavsye etmiyorum
BRASIL 🇧🇷🙄😎👍
Brasil 1 - 7 Germany ahahah
I noticed the magnet for shavings and dick capture, what would the process be if one wanted to do this on stainless steel?
Disc* stupid autocorrect 😳
Ok... good vid but...
Who would do all that set up in full Garb....including brand new gloves.
Not this sailor.
muy largo para tan poco contenido.Muy aburrido
I came for the tapping and stayed for the scruff
All that ppe seriously...
pay 200 an hour, i still would for that kind of job... its akiller explosion... hey ill trade you an iphone 4 both of you kidneyss.. jahajjaj
This aint Pipe Fitting 101 show me the fucking tapping machine.
If you have to read the instructions you should not be doing this on a live pipe.
+Luke Linsmeyer that's the whole point of it. or else he would just be installing a fat sockolet or putting in a tee
+Devo yes but when you practice you don't do it on a live pipe. By the time you do this on a live pipe you should be good enough to not read the instructions.
oh i see what you mean now. i thought you meant the instructions say dont do it on live pipes.