Go to L-Connect and find the settings where you adjust the screen. The right under the picture where is shows you how the screen will look, you have a square with a small arrow showing the orientation. Click it until the screen gets horizontal.
@@PCCrazyDario I am currently researching to for my next build. I would prefer the look of where your tubes go because it doesn't block view of the RAM but the info says the pump is in the water block over the cpu. So that would mean the pump is higher since all the tubes are going down into the radiator. I haven't built for a few years so I don't know for sure I'm genuinely asking the expert just trying to clarify and not argue. Appreciate any feedback! Current Plans - Lian Li Vision White case, low mode for 2 SL-INF 120mm rear exhaust, 3 SL-INF Reverse 140mm intake bottom, Hydroshift 360 AIO with fans swapped to 3 TL-LCD Reverse Intake on side. Would like your positioning of tubes in this build because it will show off the Trident Royal RAM better than having the tubes going upwards over it. Other cool stuff: 9800x3d, x670e Taichi Carrara (the white one), Trident Z Royal 2x16 RGB DDR5, AsRock Phantom Gaming (white) 7900xt white (just a stopgap that fits the aesthetic until next year's GPUs)
Awsome build! Im planning to do something similar to this. May I ask whether the AIO tubes would get in the way if I wish to vertically mount my GPU? Thanks a bunch!
Thank you! If you check 8:05 you would see that the tubes are really going far to the front side tempered glass and they cover most of the part of the expension slots, so I wouldn't bet on it. You could fiddle around since I didn't actually try it, but as far as I can see, rotate the AIO or something else and try if you have a riser already prepared.
![สาวเมืองเพชร - ธีเดช ทองอภิชาติ [Official MV]](http://i.ytimg.com/vi/kEt7F9PvO3I/mqdefault.jpg)
Can you orient the radiator so that the tubes are flowing to the top left rather than bottom left?
I own a Kraken elite 360(2023) do you think it's worth upgrading to this? (Hydroshift)
Thank you my friend.
@@cheekster777 Thanks man for the comment!
Hi!
hydroshift lcd 360tl The CPU and GPU temperature display on the LCD is tilted to the right. How can I make it straight?
Go to L-Connect and find the settings where you adjust the screen. The right under the picture where is shows you how the screen will look, you have a square with a small arrow showing the orientation. Click it until the screen gets horizontal.
Question, did you have to buy 3 more reverse fans for the AIO?
Yes because I wanted to have reverse blades on it instead of regular blades…
Where are the controllers for the hydroshift and the LCD fans? I couldn't see any sign of them.
@@Mapantz1 One controller, everything connected to it.
@@PCCrazyDario ĺòppòp7ooò
Will that AIO work effectively in that position?
Pump is still lower than the highest point of the closed loop, so yeah. It will…
@@PCCrazyDario I am currently researching to for my next build. I would prefer the look of where your tubes go because it doesn't block view of the RAM but the info says the pump is in the water block over the cpu. So that would mean the pump is higher since all the tubes are going down into the radiator. I haven't built for a few years so I don't know for sure I'm genuinely asking the expert just trying to clarify and not argue. Appreciate any feedback!
Current Plans - Lian Li Vision White case, low mode for 2 SL-INF 120mm rear exhaust, 3 SL-INF Reverse 140mm intake bottom, Hydroshift 360 AIO with fans swapped to 3 TL-LCD Reverse Intake on side. Would like your positioning of tubes in this build because it will show off the Trident Royal RAM better than having the tubes going upwards over it.
Other cool stuff: 9800x3d, x670e Taichi Carrara (the white one), Trident Z Royal 2x16 RGB DDR5, AsRock Phantom Gaming (white) 7900xt white (just a stopgap that fits the aesthetic until next year's GPUs)
Awsome build! Im planning to do something similar to this. May I ask whether the AIO tubes would get in the way if I wish to vertically mount my GPU? Thanks a bunch!
Thank you! If you check 8:05 you would see that the tubes are really going far to the front side tempered glass and they cover most of the part of the expension slots, so I wouldn't bet on it. You could fiddle around since I didn't actually try it, but as far as I can see, rotate the AIO or something else and try if you have a riser already prepared.
Really, really nice build and video. 👍🏻😎
Thanks man! :D
Amazing build.
@@ricardorocha4436 Thanks! 🙌
I cannot find the way to enable the rgb of the Hydroshift lcd . Can you help ?
im curious to see this exact same setup on high mode, would the pumps be stretched out?
Zašto ekstenzije na tako lepe kablove od Lian Li napajanja????
Ovi imaju ljepše cable combove iskreno, a i u boji su. Slažem se da oni uopće nisu loši, ali s obzirom da je sve crno, htio sam malo boje dodati.
very cool video!
@@HarrySatchelWhatsThatSmell Thank you 🤗
Amazing looking PC! Can I keep it? 😂
Great !
리안리 비싸긴하지만 먼가 깔끔하다 ㅋㅋ
:D
How much
$3000
why using reverse fan on rad AIO ???
very very bad
Why ?