Fordson E27N PTO Removal

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ต.ค. 2024
  • How to remove the PTO shaft on a Fordson E27N.

ความคิดเห็น • 3

  • @olinqua1
    @olinqua1 6 หลายเดือนก่อน

    Nice one, that’s my next job, but, does the PTO shaft seal as it passes through the gearbox to the diff, as I drained the diff and loads of oil (and sludge) came out and the gearbox oil level was low, I topped the gearbox up with white spirit and that is draining into the diff ( I’m gonna change the gearbox oil anyway after)
    I’ve got to do the front PTO seals too, it’s that partition between GB & Diff I’m worried about as the GB is higher that the diff, so will the GB oil keep draining into the diff even when diff oil is back in ??

    • @fixingfordsonsaustralia6632
      @fixingfordsonsaustralia6632  6 หลายเดือนก่อน

      My next video will be this very issue! The PTO gear housing at the bottom of the gearbox has 2 chambers separated by a bearing/seal. The splined shaft goes through this seal and then the PTO shaft slips over the spline after poking through the diff housing.

    • @olinqua1
      @olinqua1 6 หลายเดือนก่อน

      Ah ok, excellent, I will look out for it, thanks