You have my respect. One hard working guy for sure. I had to spend the extra money and get something with a lot of hydraulics due to my age and poor physical condition. Learning a lot from you. Thanks from the pine tree state of Mississippi. 🙈
A milling tip I saw on another youtube channel was to obtain your largest timbers from your smallest logs. If you need a 6x6 or larger, get that from your smallest tree that will yield that size. This produces less waste overall. The flip side of that, is if you need a large number of small size lumber, get those from your biggest logs, as those will yield the greatest number of that size. Overall minimizing waste.
The method you used to see where the tree would end up is an old method we used 60 years ago in the Scouts to estimate the height of a tree, it still works.
Love the rake tip at the beginning of your video and that winch is a great idea and a life saver no doubt. Sure is nice making your own lumber the mill will pay for itself over and over with the savings of not having to buy the lumber you need. Keep on making your videos I look forward to watching them!
What I do when trying to keep the pith level is I keep some scraps laying around and set them under the small end to shim it to the same height. Just make sure your blade clears the log, measure from the pith to the blade. Without moving the blade check the other side and shim accordingly. I keep a wooden fence post to use as leverage to lift the end
Thanks for the great video! I have been a subscriber for a while but have never left a comment. Really enjoyed the demonstration of the "stick trick"! This is a really old logger/lumberjack technique which a lot of modern tree fellers have no idea how to use. You did a good job of explaining it. With practice you can become almost deadly accurate. I think you do an exceptional job of the video quality inn, position. Also, I really enjoy your pace at work which I try to emulate. Keep up the great work. John
That tree falling trick works well. I had a neighbor who was a logger and he showed me that trick using just a stick. If you do it right its impressive how accurate it is. Great video and nice milling! 👍
Reading the tree is a art form that comes with time and your already making steps that lead to saving steps. For one hing, your not trying to saw the tops off the braces and that is a positive thing. The pith if you can get rid of it is a good thing but don't worry yourself over it as he lumber that you get at home depot. It is what it is and use the wood accourdingly. You won't waist as much and the wood will lay better when you hang it. If you soak your wood inalake, the sap will come out in the water and the logs won't curl as bad. You can get the wide boards and good quality too.. Old indian trick dad taught me/LOL
If you will put a one by or two by, depending on the taper off your log, under the small end for the first two slab cuts, you will be very close to centering the pith. Less waste that way I've seen you do it before, I think, so maybe you just forget. I forget too, as I get all excited wanting to see what's in the log! Love you videos...
Another good video, thank you. I'm going to have to check out that rake tip video that you're talking about. It also looks like you have more firewood to add to your new firewood shed😆. Have a good and safe summer.
I wonder if you drilled through the cross section near the head of the mill and added an adjustable slotted piece of metal if you could create your own toe board substitute. Oh and how is your solar kiln performing?
Do you have any luck with the 4 X 4 staying straight since they are not cut from the center? I only cut 6x6 and any large beams from the center to keep them straight. I really like that winch! I need one for if I am not in my sawmill shed.
Check out the Wood Mizer “log taper wedge” for dealing with tapered logs on the lt15. It seems to work well for me but has a limit to the amount of taper it can handle. Believe it’s about $55 through Wood Mizer accessories. Before purchasing the log wedge, I’d use the tapered end of a flitch to wedge up the low end of the log to center the pith. Btw - while I’ve yet to contact them regarding the out of square frame, their customer service (at least in Maine and the Midwest - I’m in Vermont) has been fantastic to deal with. Good luck on all fronts! Keep up the great work and continuous search for improvement 👍🏼
Hugh Griffiths I deal with their GA branch and they’ve always bent over backwards for me. If my adjustments in the last video don’t work ill probably end up taking it up to them.
Did you fabricate the winch mount, meaning the adapter goodie that lets the winch slip onto on the rail? Or is that (and the ramps) a Wood Mizer product?
The rake test works just fine, but its not about the rake, its about experience. You can just as well use a stick or your thumb or anything will do, its just a matter of developing the technique.
Sei veramente.Complimenti Da quale stato americano mandi i video.Io vedo spesso il tuo lavoro.Sono di Modena vicino la FERRARI e lavoro il legno di ulivo.Ciao se vieni ti offro una pizza e se mi rispondi in Italiano perché non parlo americano.
Again got home from work 01:00 am scotland time, great video, 2 questions, there is a lot of waste, what do you do with this?. And Do you replant more trees than you Fell? Thanks again for your time and effort.
Alistair Blanch I usually burn the slabs, although it could be used for outbuilding siding...I just don’t like the look of it as siding. I try to cut so that the forest here is thinned in such a way that the other trees become healthier. So, I don’t plant more trees than I cut because my trees are overcrowded as it is. When the time comes, I’ll definitely be planting more where needed.
Jim Willoughby Not much experience with dealing with it. I think it’s species dependent, and I’ve never had trouble with pine, but it appears that the pith can have a tendency to check worse than the rest of the boards. If you’ve ever split oak firewood with an ax, I always aim for the crack in the dead center of the log. Hit that pitch check just right and the wood will fly apart. Maybe a more experienced sawyer can chime in with more detail?
YOu have a battery starter on your mill right? Why not either find a 12 volt battery drill and hard wire it to the battery or a simple plug when you run the winch or another idea is an inverter and a corded drill? Just thinking about you being on site and your drill dies. Ain't nobody got time for doing it by hand! lol
I like the speed you saw, every one else saws so slow it drives me crazy. Be sure to sticker the very ends of your boards, If I forgot to tell you before the easy way to know the maximum cant size of any log is to measure the diameter under bark, DUB ,small end, and multiply that by point 700. 12" x .700 = 8.4" Have fun.
Good job as always . You know what, I would like to see you make a video cutting planks for making bee hive boxes.... thanks, Two for one video .😊😁. Phillip Hall
Yea, you messed up a bit with the rake trick. Hopefully, my explanation will help you, so you'll understand what you're trying to do so you'll do better in the future. All you're doing is using the rake to create a right triangle with 2 45 degree angles. The two short legs of this triangle is a line from your eye to where you're holding the rake handle, and from where you're holding the rake handle to the top of the rake handle. The initial manipulation you perform is simply getting the top of the rake handle close to your eye so those 2 measurements are the same. After, you've created the 90/45/45 triangle using your arm and the rake, you then walk forward and backward until the top of the rake handle aligns with the top of the tree. This in turn create a similar triangle with the two equal legs being the distance from you to the tree, and the height of the tree.
I've been laying here watching this , and for me , I would have to plan earlier,, yes trim off your bark but take your dimensions from your base line,,, calibrate your thickness guide from the bottom ,, not from a random place , then you wouldnt end up with a fat or skinny board,
I just have to tell you this story. I had a 70 foot oak in my yard I called a tree man out to give me a price to drop the tree. I have a pool a pole barn and electric lines going to pole barn. He gives me a price to drop the tree of 500 dollars. I told him go ahead and set up a time to do it. He said I will do it Wright now. I ask if he was going to get a bucket truck. He dont need it he look the tree over for 15 minutes then he got his chainsaw he cut that tree down it miss the pool by 1 foot and the pole barn by 1 inch and the electric line by 3 feet. I said man you just missed my pole barn by 1 inch. He said to me that is all I had to miss it by. I was in shock!! That was the fastest 500 dollar I've ever spent. He did not even have a rake!!
why did I watch this whole thing? Why is this soothing?
You have my respect. One hard working guy for sure. I had to spend the extra money and get something with a lot of hydraulics due to my age and poor physical condition. Learning a lot from you. Thanks from the pine tree state of Mississippi. 🙈
I am an 82 year old Virginia man, who loves dogs. 'Cricket' looks like my kind of digger!
Really appreciate all the camera angles I know that is a lo of extra work but it doesn't go unnoticed
Bankhead_662 Thank you! It does take a while, but I like the final results!
I seen the drone footage in the beginning and I was impressed
Very impressive thanks for this amazing video
A milling tip I saw on another youtube channel was to obtain your largest timbers from your smallest logs. If you need a 6x6 or larger, get that from your smallest tree that will yield that size. This produces less waste overall. The flip side of that, is if you need a large number of small size lumber, get those from your biggest logs, as those will yield the greatest number of that size. Overall minimizing waste.
Just make sure you cut your large timber first so that you don't run out of the big trees if you need them for the big timber ;)
The method you used to see where the tree would end up is an old method we used 60 years ago in the Scouts to estimate the height of a tree, it still works.
Love the rake tip at the beginning of your video and that winch is a great idea and a life saver no doubt. Sure is nice making your own lumber the mill will pay for itself over and over with the savings of not having to buy the lumber you need. Keep on making your videos I look forward to watching them!
U S A Patriot Always appreciate you watching! That drill on the winch is a game changer!
Hola excelente video mucho trabajo pero se hace con responsabilidad y seguridad cuidate mucho Saludos desde Panamá provincia de chiriqui
Great job enjoyed that, looking good!!!!
Looks like you have perfected getting those logs up on the platform.
Joan Kamp Agree. I don’t think I could do much better. Appreciate you watching!
Just from your videos. I bought a lt10. It's a great USA product.
Spartan Angus I cut a bunch of lumber on mine! They are solid, simple machines.
What I do when trying to keep the pith level is I keep some scraps laying around and set them under the small end to shim it to the same height. Just make sure your blade clears the log, measure from the pith to the blade. Without moving the blade check the other side and shim accordingly. I keep a wooden fence post to use as leverage to lift the end
I don't have toe boards but keep an assortment of shims to level the center of the log. This practice improves efficiency
Stephen Rude Great tip, thanks!
Thanks for the great video! I have been a subscriber for a while but have never left a comment. Really enjoyed the demonstration of the "stick trick"! This is a really old logger/lumberjack technique which a lot of modern tree fellers have no idea how to use. You did a good job of explaining it. With practice you can become almost deadly accurate. I think you do an exceptional job of the video quality inn, position. Also, I really enjoy your pace at work which I try to emulate. Keep up the great work. John
Thank you, John. I appreciate you watching!
Good stuff. I think most men would love to have a sawmill👍👍👍
...and quite a few women, myself included.
Me too. I am learning and researching what I really need.
That tree falling trick works well. I had a neighbor who was a logger and he showed me that trick using just a stick. If you do it right its impressive how accurate it is. Great video and nice milling! 👍
Dillons Woodworks Thanks, Mike! It seems to work well, just need some practice!
Reading the tree is a art form that comes with time and your already making steps that lead to saving steps. For one hing, your not trying to saw the tops off the braces and that is a positive thing. The pith if you can get rid of it is a good thing but don't worry yourself over it as he lumber that you get at home depot. It is what it is and use the wood accourdingly. You won't waist as much and the wood will lay better when you hang it. If you soak your wood inalake, the sap will come out in the water and the logs won't curl as bad. You can get the wide boards and good quality too.. Old indian trick dad taught me/LOL
Man you got smart with that impact on the winch.
Wayne Mills It’s been a game changer, just a standard DeWalt drill and a modified socket!
@@falllineridge I saw the video after I made that comment.
Sir I want to ask you about that tree? That's is good for making a houses
How long do you have to wait before you can use fresh milled lumber?
No rakes were harmed in this video!
If you will put a one by or two by, depending on the taper off your log, under the small end for the first two slab cuts, you will be very close to centering the pith. Less waste that way I've seen you do it before, I think, so maybe you just forget. I forget too, as I get all excited wanting to see what's in the log! Love you videos...
Appalachian Mountain Homestead Yes, I’ve done it before, but sometimes I get lazy. Appreciate you stopping by.
Enjoyed the video.👍🏻👍🏻
Another good video, thank you. I'm going to have to check out that rake tip video that you're talking about. It also looks like you have more firewood to add to your new firewood shed😆. Have a good and safe summer.
How long before u use it. Is that what they say as green ?
I wonder if you drilled through the cross section near the head of the mill and added an adjustable slotted piece of metal if you could create your own toe board substitute. Oh and how is your solar kiln performing?
nhcaesar I’m sure something could be fabbed up. Kiln works really well! It’s not very ergonomic, but it dries wood!
You do not need toe boards to keep the center even. I just use some aluminum blocks and measure to hold it up on the small end. I like watching!
Charles Wilke Thank you, Charles! Appreciate the tip.
Great looking wood! Gonna dry in the solar kiln?
Dillons Woodworks I’ll let it air dry for a little while, then put it in the kiln.
Great video !
If u have an outdoor wood furnace you’d be set with all that slab wood
How many board feet did you get out of that tree
Your winch idea is genius Wood Mixer should make something like that for the LT10 and the LT15 from the factory otay
Quentin Porcupine The winch is a wood Mizer product...the drill adapter was something I built. Works great! Appreciate you watching.
How is the kiln working. Would love to see an update
How long do you have to dry Pune 4x4s to use for a fence and pole barn
Keep us up on the adjustment of the mill travel adjustment please. Do you have a drill press and a welder?
Do you have any luck with the 4 X 4 staying straight since they are not cut from the center? I only cut 6x6 and any large beams from the center to keep them straight. I really like that winch! I need one for if I am not in my sawmill shed.
Charles Wilke Not sure, these are really the first 4x4s I’ve cut. Hopefully they’ll stay straight.
Check out the Wood Mizer “log taper wedge” for dealing with tapered logs on the lt15. It seems to work well for me but has a limit to the amount of taper it can handle. Believe it’s about $55 through Wood Mizer accessories. Before purchasing the log wedge, I’d use the tapered end of a flitch to wedge up the low end of the log to center the pith. Btw - while I’ve yet to contact them regarding the out of square frame, their customer service (at least in Maine and the Midwest - I’m in Vermont) has been fantastic to deal with. Good luck on all fronts! Keep up the great work and continuous search for improvement 👍🏼
Hugh Griffiths I deal with their GA branch and they’ve always bent over backwards for me. If my adjustments in the last video don’t work ill probably end up taking it up to them.
Did you fabricate the winch mount, meaning the adapter goodie that lets the winch slip onto on the rail? Or is that (and the ramps) a Wood Mizer product?
pneumatic00 It’s a Wood Mizer product. I fabricated the drill adapter from a socket, but the winch is factory.
pneumatic00 has always
pneumatic00 has always had been
Is there any seller ? I want white pine in pakistan
The rake test works just fine, but its not about the rake, its about experience. You can just as well use a stick or your thumb or anything will do, its just a matter of developing the technique.
Is this video after you got the entire saw mill lined up?
Lined up as well as it was in the previous video. It's working better now, still room for improvement.
Sei veramente.Complimenti Da quale stato americano mandi i video.Io vedo spesso il tuo lavoro.Sono di Modena vicino la FERRARI e lavoro il legno di ulivo.Ciao se vieni ti offro una pizza e se mi rispondi in Italiano perché non parlo americano.
Hello Can you give me the price of the saw?
Good luck with your machine.
Why aren't you using the solar kiln for these boards? Is it still working?
Bill Carpenter Works fine. I’m letting them air dry for a bit first.
Goes thru the log like butter!
Will you let the wood dry out or not?
Great looking lumber!
SnapperKC Yes, I’ll let it air dry for a little while then put it in the kiln.
W.O.W.
Again got home from work 01:00 am scotland time, great video, 2 questions, there is a lot of waste, what do you do with this?. And Do you replant more trees than you Fell? Thanks again for your time and effort.
Alistair Blanch I usually burn the slabs, although it could be used for outbuilding siding...I just don’t like the look of it as siding. I try to cut so that the forest here is thinned in such a way that the other trees become healthier. So, I don’t plant more trees than I cut because my trees are overcrowded as it is. When the time comes, I’ll definitely be planting more where needed.
Good video thanks
I've seen other videos of guys who have their own Wood Mizers , and the've talked about removing the pith. Why is the pith undesirable?
Jim Willoughby Not much experience with dealing with it. I think it’s species dependent, and I’ve never had trouble with pine, but it appears that the pith can have a tendency to check worse than the rest of the boards. If you’ve ever split oak firewood with an ax, I always aim for the crack in the dead center of the log. Hit that pitch check just right and the wood will fly apart. Maybe a more experienced sawyer can chime in with more detail?
What do you do withoutsude slabs with bark?
I don't have a use for them so they go into the burn pile.
Make sure your side supports are square that was my problem on my lt-15
no waste nice
Awesome
Donald Trabeaux Thanks as always, Donald!
It was like watching an artist working
YOu have a battery starter on your mill right? Why not either find a 12 volt battery drill and hard wire it to the battery or a simple plug when you run the winch or another idea is an inverter and a corded drill? Just thinking about you being on site and your drill dies. Ain't nobody got time for doing it by hand! lol
Or just go with a cheap winch from Harbor Freight for that matter.
For you honey cappings use a potato masher.
I like the speed you saw, every one else saws so slow it drives me crazy. Be sure to sticker the very ends of your boards, If I forgot to tell you before the easy way to know the maximum cant size of any log is to measure the diameter under bark, DUB ,small end, and multiply that by point 700. 12" x .700 = 8.4" Have fun.
Good tip, thank you!
Good job as always . You know what, I would like to see you make a video cutting planks for making bee hive boxes.... thanks, Two for one video .😊😁. Phillip Hall
Can you send me your pattern for your bed frames?
Yea, you messed up a bit with the rake trick. Hopefully, my explanation will help you, so you'll understand what you're trying to do so you'll do better in the future.
All you're doing is using the rake to create a right triangle with 2 45 degree angles. The two short legs of this triangle is a line from your eye to where you're holding the rake handle, and from where you're holding the rake handle to the top of the rake handle. The initial manipulation you perform is simply getting the top of the rake handle close to your eye so those 2 measurements are the same.
After, you've created the 90/45/45 triangle using your arm and the rake, you then walk forward and backward until the top of the rake handle aligns with the top of the tree. This in turn create a similar triangle with the two equal legs being the distance from you to the tree, and the height of the tree.
👍
I've been laying here watching this , and for me , I would have to plan earlier,, yes trim off your bark but take your dimensions from your base line,,, calibrate your thickness guide from the bottom ,, not from a random place , then you wouldnt end up with a fat or skinny board,
It should work, its just basic geometry, we all learned in high school math.
Eighteen pieces of lumber and lots of FIREWOOD...
i guess you fixed your tracking problem
casy casy Still have a kink or two to work out, but I don’t think it’ll slip off the side again.
I just have to tell you this story. I had a 70 foot oak in my yard I called a tree man out to give me a price to drop the tree. I have a pool a pole barn and electric lines going to pole barn. He gives me a price to drop the tree of 500 dollars. I told him go ahead and set up a time to do it. He said I will do it Wright now. I ask if he was going to get a bucket truck. He dont need it he look the tree over for 15 minutes then he got his chainsaw he cut that tree down it miss the pool by 1 foot and the pole barn by 1 inch and the electric line by 3 feet. I said man you just missed my pole barn by 1 inch. He said to me that is all I had to miss it by. I was in shock!! That was the fastest 500 dollar I've ever spent. He did not even have a rake!!
Steve Dawson Wow! Guy sounds like a daredevil!
so you just cut 3 4x4 and 2 2x4 out of a 14 in but log. way to much scrap the way you started
6
well hell anyone can do it with a sawmill I could do it with a swazall an skill saw if I had to one day soon I make the video
The selective beef behaviorally worry because boat typically paddle sans a perpetual january. equal, crazy distribution
Did you replant a new tree?