Great creative thinking! I have used epoxy a lot around old broken plastic parts but that steel wire reinforcement was absolutely brilliant. Keep posting!
I have petrol 124s and a petrol 126 but still your channel is good for these kind of videos that apply to all models and you did a good job as usual very clear instructions thank you for taking the time to make these videos you are helping a lot of people maintain their own cars and saving them money at the same time. I hope you will also begin to feature some petrols cars as well if possible in the future. Thanks once again for your efforts 👍🏽
i didn't realise that hook was so critical! i'm definitely gonna go search inside the door for it. i didn't know what to do about all the broken plastic mounting parts for the screws either- thanks for the method :)
This is a very precise - excellent repair of MB W124 door handle and door panel. I prefer MB W124 1st series (1985-1989) much more than MB W124 second series (1989-1993).
I have fixed a few of those hooks by sanding between the ribs then cut strips of steel clothes hanger and bend them into the right shape. Then put the pieces of clothes hanger between the ribs of the hook with j.b weld. Allow 24 hours to dry. I have fixed all the broken clips on all 4 of my panels and still holding after 3 years. It is a very strong repair if you allow plenty of cure time.
Great creative thinking! I have used epoxy a lot around old broken plastic parts but that steel wire reinforcement was absolutely brilliant. Keep posting!
I have petrol 124s and a petrol 126 but still your channel is good for these kind of videos that apply to all models and you did a good job as usual very clear instructions thank you for taking the time to make these videos you are helping a lot of people maintain their own cars and saving them money at the same time.
I hope you will also begin to feature some petrols cars as well if possible in the future.
Thanks once again for your efforts 👍🏽
i didn't realise that hook was so critical! i'm definitely gonna go search inside the door for it. i didn't know what to do about all the broken plastic mounting parts for the screws either- thanks for the method :)
Thank you for your videos... I just bought a 1989 e260 and I find your channel to be very valuable!!!
Pretty genius to put the wire in.
Nice solution with the two-part epoxy and strengthening wires!
it still holds today
This is a very precise - excellent repair of MB W124 door handle and door panel. I prefer MB W124 1st series (1985-1989) much more than MB W124 second series (1989-1993).
Great repair, using the wire is a great tip 👍😎👌
Well done❤
amazing! good work!!!!
I have fixed a few of those hooks by sanding between the ribs then cut strips of steel clothes hanger and bend them into the right shape. Then put the pieces of clothes hanger between the ribs of the hook with j.b weld. Allow 24 hours to dry.
I have fixed all the broken clips on all 4 of my panels and still holding after 3 years.
It is a very strong repair if you allow plenty of cure time.
My W124 E250 engine coolant temperature would not show. I changed the sensor. What could be the problem. Please help.
What roof rails/rack is on that car?
how to punch holes in console wood panel swtich antenna, double horn w124
very creative
Ausgeseichnet!
Brilliant