Ford Fuel Vaporizer Clogged Causing DPF Faults - How To DIY Repair

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 มิ.ย. 2024
  • In this video I talk about a Ford with a faulty DPF fuel vaporiser. What it does? How it works? How you can easily test it and possibly even clean it as well, should you have the same issues.
    A Fuel Vapour Valve is an electrically heated glow plug that evaporates the diesel fuel, then injects it through a tiny orifice into the exhaust gas stream directly before the DPF
    Fuel vaporiser AKA 5th injector is a major component in Diesel Particulate Filter related faults, should you be having a DPF related fault on these vehicles you would be well advised to assess the Fuel Vaporizer
    Fault codes that were stored
    P2463 - Diesel Particulate Filter Restriction - Soot Accumulation
    P246B - Vehicle Conditions Incorrect for Particulate Filter Regeneration has been detected
    P246C - Diesel Particulate Filter Restriction - Forced Limited Power
    P24A4 - Diesel particulate filter restriction - soot accumulation too high (Bank 1)
    DPF Repair/info videos that I previously made
    Ford Ranger / Mazda BT 50 - • P246C P2463 DPF Faults...
    BMW X5 - • Bmw DPF Faults - Guide...
    Mitsubishi Triton - • Check DPF System Warni...
    Thanks to everyone who watches my videos, Likes, Shares and or leaves a comment. I appreciate everyone of you.
    Tool options that I recommend and use. www.amazon.co.uk/shop/gerardb...
    ➢ For business inquiries Email : gerardburkebusinessinquiries@gmail.com
    Disclaimer:
    GerardBurke is a qualified motor technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
    Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke.
    Ford Valve Assy - Fuel Vapour For Focus & Mondeo
    Part Number: AV619T540BF
    Fuel Vapour Valve Assembly
    Suits these vehicles
    Focus LW 2011-/Focus ST LW 2012-On 2.0 Diesel (From 03/01/2011-21/06/2015)
    Focus LW MKII 2012-2015 2.0L Diesel (From 04/06/2012-03/05/2015)
    Mondeo MA/MB/MC 2007-2014 2.0L Diesel (From 01/04/2010-On)
    Ford Fuel Vapour Valve Assembly For Kuga & Escape
    Part Number: CV619T540AB
    Exhaust System Valve Assembly
    • 2.0L Duratorq DOHC 150/163PS DW10C
    • 6 Speed Powershift 6DCT450 MPS6
    • Fuel Vapour
    Suits Kuga TF TFII & Escape ZG 2013-On (From 05/11/2012 - 23/04/2014)
    Ford explorer, Transit, connect, ranger, mazda BT 50
    2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
    #VapourValve #FuelVaporizer #Ford
  • ยานยนต์และพาหนะ

ความคิดเห็น • 10

  • @MiracleMAX
    @MiracleMAX หลายเดือนก่อน +1

    Great info mate! I am teaching 'Emissions' in class tomorrow. I now have a decent, practical video on the subject to share with the class. Thanks heaps. 😉😉👍👍

    • @GerardBurkeBurkesGarage
      @GerardBurkeBurkesGarage  หลายเดือนก่อน

      That's fantastic mate, great to hear. Thanks for the feedback :)

  • @patkelly7999
    @patkelly7999 หลายเดือนก่อน

    Mighty job Gerard, very detailed video, Thank You👌👍🙏😎

  • @gemmanaughton3693
    @gemmanaughton3693 หลายเดือนก่อน +1

    Great video🌟

  • @Vincent-cc8xo
    @Vincent-cc8xo หลายเดือนก่อน +1

    Appreciate you sharing your knowledge excellent video

    • @GerardBurkeBurkesGarage
      @GerardBurkeBurkesGarage  หลายเดือนก่อน +1

      Thanks very much Vincent

    • @Vincent-cc8xo
      @Vincent-cc8xo หลายเดือนก่อน

      ​@GerardBurkeBurkesGarage quick question, was going to buy a topdon phenoix plus for doing adblue ,dpf ,egr resets, but from what I make out it's launch software , any idea what model of launch would be better than the topdon ? The phenoix plus is about £750-£800 ? See the launch x431 but there's loads of different versions and prices ? Any advice appreciated mate

    • @GerardBurkeBurkesGarage
      @GerardBurkeBurkesGarage  หลายเดือนก่อน +1

      They share software, Look up Thinktool as well and see which one compares to the specs you want, The Topdon phoenix is comparable to the Thinktool Master, both will be cheaper than Launch typically as Launch has a better global brand presence.
      I have done a review on the Thinktool master on my channel, they are all very very similar (almost identical in every way) quality tools but better value for money will be between Topdon and Thinkcar depending on your region and sellers.

    • @Vincent-cc8xo
      @Vincent-cc8xo หลายเดือนก่อน

      @GerardBurkeBurkesGarage thanks for the detailed detailed reply ended up ordering the phenoix plus last night got it for £620 hopefully I don't get taxed on it