How To Replace Lower Ball Joint 1992-Present Ford E-250

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASB...
New Ball Joint Set from 1AAuto.com 1aau.to/ia/1ASF...
Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 1992-2021 Ford E-250.
• Check here for more videos on the 1992 to Current Ford E-250: • Ford E-250 4th Generat...
This repair was done on a 2007 Ford E-250 Base 5.4L and the process should be similar on the following vehicles:
1992 Ford E-250
1993 Ford E-250
1994 Ford E-250
1995 Ford E-250
1996 Ford E-250
1997 Ford E-250
1998 Ford E-250
1999 Ford E-250
2000 Ford E-250
2001 Ford E-250
2002 Ford E-250
2003 Ford E-250
2004 Ford E-250
2005 Ford E-250
2006 Ford E-250
2007 Ford E-250
2008 Ford E-250
2009 Ford E-250
2010 Ford E-250
2011 Ford E-250
2012 Ford E-250
2013 Ford E-250
2014 Ford E-250
Tools you will need:
• Flat Blade Screwdriver 1aau.to/opo/1AX...
• Pry Bar 1aau.to/oea/1AX...
• 21mm Socket
• 22mm Socket 1aau.to/oaP/1AX...
• 8mm Socket 1aau.to/omT/1AX...
• Ball Joint Press
• Brake Caliper Hanger 1aau.to/oaj/1AX...
• Pickle Fork
• Snap Ring Pliers
• Straight Cutters
• 1/2 Inch Impact Gun 1aau.to/oa3/1AX...
• 1-1/8 Inch Socket
• T45 Socket
• 3/8 Inch Breaker Bar
• Ratchet 1aau.to/oqD/1AX...
• Socket Driver
• Socket Extensions 1aau.to/opq/1AX...
• Torque Wrench 1aau.to/oi3/1AX...
• 1-1/16 Inch Wrench
• 1-1/8 Inch Wrench
• Paper Towels 1aau.to/ob5/1AX...
• Rust Penetrant
• Floor Jack 1aau.to/oeu/1AX...
• Hammer
• Jack Stands 1aau.to/oea/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford E-250 4th Generation 1992-Present: • Ford E-250 4th Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*

[@bobbyz7736]

Fantastic video. No wasted time, no music, torque specs as you go. Great job. Thanks!

[@meiowalot7570]

This was the best video of its kind I have come across, and I’ve watched about 30. This is what I’ll be referencing when I work on my van front end rebuild.
Thank you for the detail, excellent explanation, torque values, etc. this is great.

[@nibblesd.biscuits4270]

Great video
thank you for the detail and clean instructions with torque specs

[@MikeBrownRehobothBeach]

Can't you take off the caliper and caliper bracket together if you're not installing new brake pads?

[@bayareaelectical]

Exceptionally wonderful. Love tutorial. 👍🏼👍🏼

[@saulvilleda9954]

Good 👍 job

[@mobando45]

Do you have to remove the rotors for this if you do not need to change them?

[@VictorOrtiz-vm9dt]

Ok, TRQ WHAT ABOUT IF I REPLACE ALL FOUR BALL JOINTS AND THE WHEELS NOT WANT TO ALIGNMENT, what can be the problem? On a ford van 250 1997

[@thomasestrada2631]

Not bad but in my humble opinion I think is better to install new wheel bearing when u install a new rotor plus the caliper looks bad all rusty why not install a new one . but I understand that this is a business shop u do what the costumer tell u to do only .. but this is a helpful video 🤗👈🤝

[@TRQ]

+Thomas Estrada Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@wrong2h8]

Don't use your hand as an impact. It damages the hand. Instead keep a rubber mallet handy. Food for thought.

[@eamonaugustine1262]

How much is a cap ?
All of that work . hmmh new cap