ODIN THE DUALLY GETS MASSIVE TIRES!!!
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2025
- / diwd
Follow Me on Instagram!
/ diwd_official
Kumho Tires
www.instagram....
CUSTOM LICENSE PLATE FRAMES AND KEYCHAINS
perfectplasma.co/
perfectplasma.co/
perfectplasma.co/
perfectplasma.co/
perfectplasma.co/
NEW MERCH: www.bunkerbran...
Did you know you can get 10 percent off all HeatwaveVisual sunglasses using the code 'DOITWITHDAN'?
heatwavevisual...
Keytags & Hats
goo.gl/a6XerW
When I remember the old videos and now... Look at you, we all are proud
Dan the type of guy to go 200+ on a bike and then say 80 is too fast in a truck
Well they do take about the same time to stop at those speeds😂😂
I can tell you as a guy who has driven european truck, going faster than 89kmh so like 53mph? is scary in a semi, scary even in a smaller commercial truck too. They are just not designed to go that much faster.
You must not have thought this comment thru lol. You watched him go to the shop and get told all that shit needs fixed.
@@loweredyote8416 you must not have thought thru how to spell through
@@krawczak9182 it’s just faster and easy to understand. Maybe you can cry a little harder and I’ll change it for baby
Stoked to see the dually almost finished up Dan. It’s also great to see you coming up in my timeline again I’d love to see weekly uploads even if it’s just stories while you’re cutting plates.
Hey Dan, I work as a mechanic and we see these large trucks all the time. Depending on the style of lift your truck has I highly recommend a kryptonite front end kit. These GM trucks are known for destroying front end components. The kit replaces the pitman arm, idler arm, idler arm bracket, and inner/outer tie rods. The CV axle boot being ruptured is caused my the lift on your truck stressing the boots. As a general rule of thumb if your truck has anything over a 2.5in. leveling kit it produces more stress onto the front end. And as for the tune and delete aspect, the people at the diesel performance shop are completely correct. I live in Georgia as well and the only place that has emissions tests are Atlanta. Where I am in Georgia almost no truck in the area has those EPA neutering devices. So you shouldn’t have to worry about it 😅. Thanks for giving me entertainment for almost 8 years man!
So damn cool to see Odin in these final stages! I can't wait to see it get tested more and the sweet cinematics you do for the finale!
You should make Gavin (itsjusta6) some custom parts for his dually. Love the videos man just started watching a couple days ago keep up the hard work.
The dually is looking so good! I think the front bumper looks perfect on it, no need to change it. Excited to see the new grill. As always much love Dan!
the block heater plug atleast on my lly is behind the passenger side headlight hope that helps ya find it. another thing to when your batterys die it can throw tcm and ecm codes but once you get it running let it charge up tur it off clear codes and reset the batteries and that should take care of some of those codes you see
Seeing you trucking on and putting out content after you MS diagnose makes me so happy cause I know from my wife how crippling MS can be. I'm also happy for me cause more Dan! :)
Dan - "trucks almost done finally" Also Dan- (makes 16:04 minute video about all the crap still wrong with the truck) "so it needs a lil more than I thought"
Man it’s been a while since I got to sit down a watch a DIWD video. It was nice lol
I feel like that trucks never goin to be done 😂
I like the front bumper and knowing that it was made out of good quality steel is a premium most aren't willing to pay for.
You can tell Dan didn’t choose the dually life… the dually life chose him!
37/12.50r17 is pretty common for offroad tires. I've seen alot of guys run that size in Jeeps because you can do not much of a lift with new jeeps and be able to run that size without rubbing. You may want to find out if it lowers your towing capacity because some tires are rated for less than the 35 inch counterparts.
I always thought 37's were a odd size, but I guess not lol
Dan, you're a great person and making waves in this world. Keep Do'n and I'll keep Do'n it with Dan
Such a badass truck Dan. Ive always loved the color , it flip flops between tan and grey. Keep puting in work on this truck and it will just keep getn better. Always enjoyed you vids brother. Cant wait to see what you do with the grill
Good call parking it till the ball joints were done. I work at a chevy dealer up in iowa and we recently had a new silverado come in that was lifted. Ended up ripping apart the upper ball joint, the in turn lower ball joint ripped out, CV axle tore apart and ripped the brake line. Tie rod ended up being the only thing holding the knuckle to the truck.
Welcome to the world of diesels. It’s a never ending snowball 😂 but damn they are addictive
I do a lot of crap myself. I don't like getting help. There are times though that you need to just drop it off to the professionals and be done with it. You will love being done with it. The bumper is awesome and I say keep it!
Watching Dan right b4 I hit my bed in preparation for hitting the graveyard shift at 3 am is always nice
Those trees sure are green for December 😂
Happy New Year Dan and Family.👍🇬🇧🇮🇱🇬🇧😀
My question is the guy who left the body mounts was it the body shop that helped you swap the frame?
Hey Dan, been watching the channel since the sharper bike. Have really enjoyed watching you grow as a person and content creator!
Also they say to remove the transmission to deal with the up-pipes, but it can be done without removing the transmission my shop does it all the time (LML’s are notorious for blowing up-pipes)
From sharpie bikes to where you are now. Progress
You know why I love you Dan? Because you do you bb you just do you! My god the other amount of people that just copy others Christ just glad you do you 😘
Your content is just original like always!
I've run the road ventures before and I liked them too
Gonna' look dope going to the grocery store in that princess wagon.
Great stuff buddy lots of progress here's to having the best year ever!
I love ya Dan, lmao but do y’all remember how this was supposed to be a cheap rebuild truck, and it has become the biggest money pit 😂😂
Why does the song when Dan is about to load the tires at 2:05 sound like a chill version of the Muppets Mahna Mahna??
Yeah bro you should of just bought a truck 😂 but I guess u are learning 😂🎉
Love you Dan, hope you're doing better. Proud of how far you've come
He's using that truck for its exact purpose! Moving tires that fit on the same truck. Dually power!
The chrome mirror caps would look so much better in black or brown too
You should make a cover for the brackets where the center seat used to be in the back
dang dude. this truck is one heck of a journey. i hope to see it completed soon. i can't wait to see some bike vlogs and maybe some exploring type videos. i follow @TerryB on youtube. he's a bike blogger that lives in new york city and his camera rig is next level. definitely worth checking out. love the vlogs as always. please give laura our best. so, so sorry about ya'lls pupper. that looked like a good dog. all my best. ❤
I have never been so hyped about a build getting finished. Brother it’s soooo close 😁😍 🔥🔥
It’s looking better and better as you go I like it Dan keep it up
This man really didn’t give up!!💪🏿💪🏿
I remember when you built the custom center console/seat divider. That came out insane. What would you charge to make one for my 2014 RAM 1500 ?
the top balljoints you said that could be the issue for wheel movement. also can be wheel bearings possibly.
Only the OGs were here when Dan lost the continental sponsorship! Love ya Dan!
There's 2 things that will COMPLETELY change the look of a vehicle. That's wheels & tint.
Your block heater cord should be near your front bumper, if you didn’t encounter that while your were dealing with your bumper chances are you don’t have one.
Take it to iron stab. Its right up the road its a pretty good trail.
The bumper looks like Crimson Chin from Fairly OddParents
damn i knew you were local but not down the street in powder springs lol
the guy seems like he knows his ass from his elbow, i like him. should shout out his shop
Thanks. Usually try to keep my elbow out of my ass.
Being a DIY guy myself it kinda sucks handing it to someone else to fix but sometimes you really gotta just hand it off to a professional to do it the right way.
Hey man take a look at southern diesel works. I’m not sure how close they are to you but they are good peoples
Hey Dan, you’ll remember these member how back in the 90s people would buy small cars and get tires and rims that poked out real far it used to be a style
Make or get a winch front bumper with light bar above the fairlead and put fog lights in the bumper in stock locations
You should paint match the front bumper the same as the truck or do a dual color. would look sick!
That front bumper reminds me of thanos for some reason lol
i remember when dan first bought the truck happy to see the truck looking amazing
one of my favorite trucks
Dude, pretty sure it's always been illegal to delete the DEF and DPF. Any alteration or removal of factory emissions equipment has always been an EPA violation at minimum. The fact that GA is now enforcing it would be what's new.
Imagine having 7 degree day and then your filming with just a tshirt outside
What rims are those? I really like them and need to eventually find some for my Ram.
More like poo it with Dan ha gottem
Great vid as always mate
Check out Flog bumpers, definitely got the look you’re going for
I'm finding this generation of trucks has electrical issues from hell. Going through it myself and thinking the BCM is bad
Always majorly life motivational to me.... Salute , blessings to everyone grind and motivations.......
That individual that helped you on the pickup that got in trouble, was that Ham?😢
When he says the individual that was helping me who got in trouble is he talking about the dude from the last shop that had Odin cause if so that'd funny
Busted Ball Joints ouch lol
Needs semi wheels tbh 😂 I know you just got new tires but semi wheels look sick on any dually lol
Man, I wish I had the cash to finish the diesel F250 I picked up xD (1500 bucks). Making me drool Dan, you SOB. Old girl is looking beautiful. Need to catch my ass up!
Come on Dan. You can do a couple ball joints and the cv that’s easy
It's a great day when Dan uploads! But u must say Dan I've loved the dully build the entire way through. Kinda makes me sad it's coming to an end soon. But for your sake ik you want it done love ya brother keep up the good shit
Love seeing you use both them meat sticks(legs)
Sorry, don’t mean to be negative but I’ve got 2 things. 1) the truck might crank slightly slower but it really should not have an issue starting, even at 7 degrees. 2) there is no such thing as “grandfathered in” for emissions. The state might not require emissions testing BUT emissions components are covered under federal law. It IS and always has been illegal to remove the emissions equipment. Gas or diesel. They just in the last 5 years started enforcing it. Diesel got more attention due to visible particulates from the exhaust and children “rolling coal” on people on the street
i love the dually so gd much
There's probably a block heater recall on your truck I'd call a dealership before using it.... I work for a gm dealer
Need some super singles for that thing.
Go Kryptonite with all your front end parts! You will not be disappointed, I promise you sir.
Somebody tell me about the guy who was doing the truck and got in trouble ? Sounds like some tea I must
Brake control module could be the problems with the lights on dash
Dan, you installed those on the wrong car. Kumho wanted to see those on the vette. I saw your/their insta post.
When big truck don’t have sparky spark *confused cave man noises*
I think the bumpers both rear & front should be more flatten not poke out that much.....so pretty much same design you have but closer to OEM size spec & it would be 100x better but I get it you dig the bulkiness cause of how huge that thing is.
the front bumper just needs to be re-bent to tighten up the gaps
We got to run our trucks against each other I've got a 2017 black Denali 3500 and it's got a little bit of installs and it loves to EAT!
I'm right here in Acworth/Kennesaw.
I bought my 2018 GSXR from WOW.
I've been following you for a few years now. Hit me up and together!
What ever happened to that guy that helped him with the truck??
I didn’t know the truck looked that good on the inside
Truck's sounding weird you might need to replace a sparkplug or two
But Dan, What about the Fiero?!?!
Tcm should be causing the reverse light issue
Yo dan, u gonna be streaming tonight
What tires are those?!?!? I want em on my truck
I think the bumper is too chonk but you like it so keep it
Oof dually lookin damn good!!
take it to a parking lot and flex on a curb
I remember watching u ride your lawnmower 💀💀
Didn’t the truck had a Tesla style head unit??? More truck content
Thas a big boi. Damn he thiccc...(Odin. Not you, Dan you lookin fresh AF)
Block heater at 70 degrees?! 😂🤡
7 degrees
7 not 70
Dudeeeeee!!!!!!! Nice.