Pretty sure you don’t need to take the top triple tree off to get to the riser bolts, unless HD did something different on the 2021 models. I’ve always just turned the bars to the right to access one bolt, and turned them to the left to access the other.
And FYI; you can cut that lower inner fairing cap and make it work. I have the same setup on my Electra Glide Police (no radio either) and I simply cut out the ignition hole, just past the first button on each side (leave two buttons outside). The two sides then bolt right back up and there is enough of the lip left over to keep it in place. Looks much cleaner.
Looks like he is too busy to answer Alot of questions here but I will give it a try. Would this 10'' pullback set up work OK for a shorter person as I am 5'7'' tall? Thanks!!
Great video and install, thanks for sharing! I just picked up a lower mileage '08 Street Glide with the purpose of running this setup (8" pullback) as my daily rider. However, my bike does not have a security system (fob) which was an option for the '08 model year. I know it's a big ask, but hoping you could share some quick thoughts about options for deleting/relocating the ignition and a cruise control rocker switch located on the ignition valance. ...thanks!
I want to go with the T-bar set up, but not being able to lock the forks...what happens if I'm staying at a motel, with the bike parked in front of my room? My key-fob would be in range, someone could just start up your bike...
The key fob has to be within about 30 inches of the ECM. It won't activate from inside your room. It wouldn't even activate if it were in the car parked next to the bike. The range is very close on purpose.
Pretty sure you don’t need to take the top triple tree off to get to the riser bolts, unless HD did something different on the 2021 models. I’ve always just turned the bars to the right to access one bolt, and turned them to the left to access the other.
Same as street glide
Fantastic video very well done brother and nice work also!!
And FYI; you can cut that lower inner fairing cap and make it work. I have the same setup on my Electra Glide Police (no radio either) and I simply cut out the ignition hole, just past the first button on each side (leave two buttons outside). The two sides then bolt right back up and there is enough of the lip left over to keep it in place. Looks much cleaner.
Looks like he is too busy to answer Alot of questions here but I will give it a try. Would this 10'' pullback set up work OK for a shorter person as I am 5'7'' tall? Thanks!!
Great video and install, thanks for sharing! I just picked up a lower mileage '08 Street Glide with the purpose of running this setup (8" pullback) as my daily rider. However, my bike does not have a security system (fob) which was an option for the '08 model year. I know it's a big ask, but hoping you could share some quick thoughts about options for deleting/relocating the ignition and a cruise control rocker switch located on the ignition valance. ...thanks!
I want to go with the T-bar set up, but not being able to lock the forks...what happens if I'm staying at a motel, with the bike parked in front of my room? My key-fob would be in range, someone could just start up your bike...
The key fob has to be within about 30 inches of the ECM. It won't activate from inside your room. It wouldn't even activate if it were in the car parked next to the bike. The range is very close on purpose.
Kraus now makes a keyed neck locking plate that is clean and well thought out. They’re currently priced under $70.
@@johntatsey2244 I already installed Freedumbfab bars on my bike lol
Do you know that T-Rex plate would fit on a 2022 Street Bob? I am not sure if you turn to the lock position, if there might be clearance issues.
Absolutely great video thank you , my Electra glide standard has come a long way
I definitely would not do them bars can't see or use your radio good set of ape bars 🤔 and want to 👀 my nave and radio driveing down the road
Can u use the stock brake and clutch lines if so at what height would u have to change out the lines ?
How tall are you shep? In 6'2 and like the position of your arms on this
awesome set up id like to do this on my 99 ultra is the pull back plate compatable?
Cool vid! What program did you use for reflashing the bcm?
what pullback is that? I have the flute and want that pullback. im short
Looks really nice! Where are you located?
Brewster, NY
@@IronAnchorCycles THANK You
one thing good the new stuff now allows lock.
Perfect, same as street glide as a standard same same
This is awesome.
1. Family
2. The Wall.
I love it but don’t want to loose the lock
Can you do another video on this bike?
They do make other nice setup also
Can the dealer flash a 2011 that way?
No, 14-up
Thanks for the video!
Great Video! Could you use any bar/riser set up with the Krauss plate?