You are a great mechanic the way you explain the problem and diagnose alot of people it's like another language but you explain it in simple terms Thank you for the videos please keep them coming God Bless you
Your videos are as good as others like South Main auto, Pine Hollow, Rainman Rays, etc but you are never mentioned by the ones in their comments section but I'll be the first to do so as you are one of the 1% club of mechanics who actually diagnose vehicles the right way! Others are parts changers
I love watching how you diagnose the problems. I love to hear how much the shops charge for fixing the problems too. I mean around how much money do the shops generally charge for each problems and replacements. If you could be able to tell that the dealerships and shops charge around something like that
Can you put videos on bit of heat over the bolt or is it too close to the sensor? What size was the original bolt because mine is mangled and very rusted.
Great video! My Volvo xc90 2006 has an issue with the left rear speed sensor. The other 3 speed sensors produce graphs, but the left rear doesn't display anything. In fact, the left rear speed sensor does NOT even show up in the data listed. I replaced the left rear speed sensor with a new one, and still no data. The wheel hubs and rings looked terrible, so I thought that might be the issue since I had a new left rear sensor now that wasn't reading. I replaced both rear hub assemblies and still have no response from the left rear speed sensor. I was now going to try the technique for checking the wiring harness of the left rear speed sensor with the good right rear speed sensor. Is that the way to proceed now? I should have done that first.
Hi Kit, I have front left abs sensor not showing and movement on the scanner. I ohm the connector and it was good. Couple of ohms. From the connector in the engine compartment, wires go into a fat harness. I don’t have a wiring diagram to trace wires. Do you have any suggestions?
My brake pedal sinks after changing the front brake calipers. They have changed the brake master cylinder, they have bled the ABS module with a scanner and it remains the same. I can't find the problem, any ideas?
Throwing wires around for me is not a fast way to check wiring. For this type of sensors use led test light and look on the scan tool while connecting the circuit. It should generate a signal.
You are a great mechanic the way you explain the problem and diagnose alot of people it's like another language but you explain it in simple terms Thank you for the videos please keep them coming God Bless you
@frankcortes3744 Thank you!
Your videos are as good as others like South Main auto, Pine Hollow, Rainman Rays, etc but you are never mentioned by the ones in their comments section but I'll be the first to do so as you are one of the 1% club of mechanics who actually diagnose vehicles the right way! Others are parts changers
@bmanmitch2005 Thank you! I appreciate you!! The guys you mentioned are some of the Best in our industry!!
I totally agree with you!
He can do it all.
I love watching how you diagnose the problems. I love to hear how much the shops charge for fixing the problems too. I mean around how much money do the shops generally charge for each problems and replacements. If you could be able to tell that the dealerships and shops charge around something like that
@leletipiham8156 Thanks!
Good diagnose and repair. From South Africa
@wsnxumalo6707 Thank you!
im a first timer on yr showcbut very impressed to watch you jobs. good work keep me posted thanks a lot
@davidjaarts123 My Pleasure! and welcome to our youtube community!
You like always doing an amazing job, you are for sure one of the best out there!
@dinhas9398 Thank you! Good to see you here again!!
Nice dygnostics there, changing the sensor wires was neat and short way to find the fault. Like it and enjoyed the vid, thank you.🐞
@mohabatkhanmalak1161 My Pleasure! Thank you!
Good diagnoastic. Good video
@mehmetkunt2503 Thank you my Friend!
Can you put videos on bit of heat over the bolt or is it too close to the sensor? What size was the original bolt because mine is mangled and very rusted.
@dbash2004 if you heat it up, you might melt the sensor and make it hard to come out
Proffesional job , nice way to diagnose , thanks my friend appreciated .
@mohammadal-gebaly3046 My Pleasure! My friend!
Very thorough process. Thanks for explanation and sharing.
@tedlu008 My Pleasure! Thanks
Keep it up bro I'm learning from you❤
@adamissah452 Good! Thanks
Another great diagnostic video.
Good job!
@ysitrim88 Thank you!
@@KITS_Auto_and_Truck_Repair
You're welcome .
GOOD APPROACH AND THOUGHT PROCESS THANKS FOR SHARING CHEEEERS.
@jgeorges3061 My Pleasure!
Great video! My Volvo xc90 2006 has an issue with the left rear speed sensor. The other 3 speed sensors produce graphs, but the left rear doesn't display anything. In fact, the left rear speed sensor does NOT even show up in the data listed. I replaced the left rear speed sensor with a new one, and still no data. The wheel hubs and rings looked terrible, so I thought that might be the issue since I had a new left rear sensor now that wasn't reading. I replaced both rear hub assemblies and still have no response from the left rear speed sensor. I was now going to try the technique for checking the wiring harness of the left rear speed sensor with the good right rear speed sensor. Is that the way to proceed now? I should have done that first.
@bluebox212 Yes! you should have checked the wiring first!
Great diagnosis & repair 👍
@on-site4094 Thank you!
Hi Kit, I have front left abs sensor not showing and movement on the scanner. I ohm the connector and it was good. Couple of ohms. From the connector in the engine compartment, wires go into a fat harness. I don’t have a wiring diagram to trace wires. Do you have any suggestions?
@chrisrountree8468 can you by pass the known bad sensor with the good sensor and see what happens? kinda like I did in tthis video!!
Kit'S Auto Diagnostic the best, thanks you my boss for your time
@sulemanhabib1743 My Pleasure! My Friend, thanks
I love Ur diagnosis
@georgenjuguna9869 Thank you!
Loved your job!
@Carxpert6786 Thank you!
What size bolt /nut at the sensor end? As mine is rusted to f..k.
@dbash2004 it's a E8
I'd like to have you take a look at my van. How do I get in touch with you?
@123dogrooster Sure! you can email me at kitsautoandtruckrepair@gmail.com to set up an appointement!
Nice video my master ❤
@user-dw7jv9zi1d Thank you!
My brake pedal sinks after changing the front brake calipers. They have changed the brake master cylinder, they have bled the ABS module with a scanner and it remains the same. I can't find the problem, any ideas?
@cransaftvalve734 you might still have air in the system or the Master may be leaking internally!
@@KITS_Auto_and_Truck_Repair OK. no leaks. Air?, I do not know. I will try it again. Thanks.
Amazing thank you
@ddbdss My Pleasure! Thanks
I have a e350 similar thing. What mad with mine it come on and off and say CAN wheel speed sensor implausible
@eastyorkshiremapping8928 you might have a sensor issue!
Throwing wires around for me is not a fast way to check wiring. For this type of sensors use led test light and look on the scan tool while connecting the circuit. It should generate a signal.
@tas.es9 Oh Cool! there are several ways to skin a cat!!
I like that comment brothe
There is many ways to skin the cat@@KITS_Auto_and_Truck_Repair
QUICK-WITTED
@nickayivor8432 Thanks!