No, just a MIDI cable. Refer to the manuals for specifics on how to use the DMC with the Stomp. The micro was a bit tricky but once i got it sorted it was sent and forget.
Underneath the board is a Boxking BK05 powering the Stomp and DMC.micro. There is a USB power pack powering the Relay G10, making the board completely battery powered fro up to 4 hours.
Okay, so Fassel wah, FC Low @ 394Hz, FC High @ 2kHz, and Mix varies -- for direct tones its set at 77% most of the time, 64% in front of my MT15, real low at like 33% if after a Fuzz. Level 0.0 dB
@workingclassguitarist8538 ahh man, i dont have this iteration of this preset anymore. I have some similar ones that share the same amp model and snapshot staging but nothing else is the same -- In fact I don't really use this physical setup anymore either. I've since build myself a larger board with a larger MIDI controller and a few more pedals
I didn’t understand what is your amp and if you go into the amp through input in
Sir, I’m using DMC3 and I wonder is there any pacific midi cable to use cuz I can only preset up and down. I cannot access more into my Hx stomp
No, just a MIDI cable. Refer to the manuals for specifics on how to use the DMC with the Stomp. The micro was a bit tricky but once i got it sorted it was sent and forget.
Which are the dual footswitches that you use?
On this board I've got the Disaster Area DCM.micro MIDI controller and the Mosky Dual Footswitch
What is the guitar? Ta
Ibanez Prestige AZ2402
@@alex-kenivel thanks
How’s it battery powered?
Underneath the board is a Boxking BK05 powering the Stomp and DMC.micro. There is a USB power pack powering the Relay G10, making the board completely battery powered fro up to 4 hours.
Sir can i ask for your preset for wah
Of course. I know it's the Fassel with the range extended and the mix lowered to about 77%. I'll get back to you with the exact deets when I can.
Okay, so Fassel wah, FC Low @ 394Hz, FC High @ 2kHz, and Mix varies -- for direct tones its set at 77% most of the time, 64% in front of my MT15, real low at like 33% if after a Fuzz. Level 0.0 dB
Alex cab you send me your preset please, i wanted to maximize my rig as well
@workingclassguitarist8538 ahh man, i dont have this iteration of this preset anymore. I have some similar ones that share the same amp model and snapshot staging but nothing else is the same -- In fact I don't really use this physical setup anymore either. I've since build myself a larger board with a larger MIDI controller and a few more pedals
Here's a similar preset. Same amp, uses a different IR, fuzz. Pay attention to output panning instructions: line6.com/customtone/tone/6198153/
what pedalboard is that and the size?
Gator GPB LAK 1 -- 15.75" x 7"