How To Use An EXPRESSION Pedal With The HX Stomp

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 155

  • @Place_to_keep_videos
    @Place_to_keep_videos ปีที่แล้ว +2

    Love the dedication to great tone and complex rigs in this community. The praise and worship scene is truly innovative.

  • @guillaumelesage5351
    @guillaumelesage5351 21 วันที่ผ่านมา +1

    Excellent video. Thx for the clear explanation on how to set the Stomp and how to correctly (and creatively) use the EXP pedal! Good job!

  • @motormann13
    @motormann13 4 ปีที่แล้ว +23

    Remember, you can split out your exp/ fs jack with a Y cable like you did with your fx out so you can have 2 exp pedals or 1 pedal + 1 footswitch or 2 footswitches

    • @HeyWorshipLeader
      @HeyWorshipLeader  4 ปีที่แล้ว +4

      Yes! That's right...I should've mentioned that. Thanks!

    • @shinomorello
      @shinomorello 3 ปีที่แล้ว

      So you mean, with one expression pedal using Y cable you can control 2 different effects ?

    • @mattlynn6157
      @mattlynn6157 3 ปีที่แล้ว +2

      @@shinomorello No.. I you can control 2 (or many more) effects with one pedal. He's saying with the proper wiring you can have two expression pedals, one for expression and one for volume or two separate dedicated expressions or a mix of both or switches and volume... many options. I'm doing the same thing and I've got to figure out what I want to do.

    • @anthonysthellhammerg4388
      @anthonysthellhammerg4388 2 ปีที่แล้ว +1

      Yeah but I need at least three

    • @woodywoodiyaki8214
      @woodywoodiyaki8214 ปีที่แล้ว

      hold up, so I almost have this figured out....... but i see in the HX edit that the volume and wah "position" are on two separate assignments (one is on expression pedal 1 and the other is on expression pedal 2), but you're using the same pedal to do both.
      So, am I understanding/assuming/following correctly that, in this setup, the expression pedal in use is connected to both Pedal 1 and Pedal 2 on the back of the HX Effects unit via a "Y" cable? And THAT's why I can't seem to get them both to work like you have in yours, because I only have the one expression pedal, plugged into only the Pedal 1 jack, and the "position" assignments for both wah and volume set to expression pedal 1?

  • @billschriever
    @billschriever 10 หลายเดือนก่อน +1

    I can't tell you how helpful this video is!!! The Dunlop pedal hardware switch change was what I was looking for! Thank you for the Short video that pointed me to this video!! Appreciate you!

    • @HeyWorshipLeader
      @HeyWorshipLeader  10 หลายเดือนก่อน

      That’s awesome, Glad it helped!

    • @rsr_brian
      @rsr_brian 10 หลายเดือนก่อน

      +1 - I'm a new HX Stomp XL user and had been hunting around for options for an expression pedal. I'd seen this Dunlop pedal mentioned (on Reddit, I think) but the overview and level of detail in this video convinced me to make a purchase. I didn't realize the depths you could go with it; amazing! Really appreciate it, @HeyWorshipLeader!

  • @harrisonmaas4797
    @harrisonmaas4797 ปีที่แล้ว +1

    The high-end loopers will do it now, at least they have settings for it! The Morningstar ML-10x has crazy great options for certain pedals to be trails -on!

  • @picksalot1
    @picksalot1 3 ปีที่แล้ว +3

    This may be the most useful and extensive demo on how to get the most out of an Expression Pedal with an HX Stomp. Great job! Thanks 👍😎

  • @dwimurdiansyah8258
    @dwimurdiansyah8258 4 ปีที่แล้ว +2

    This answer my question about the volume max min and max again in dunlop dvp4..thank you very much dude..helps a lot!!

  • @Gaaaaaaaaaary
    @Gaaaaaaaaaary 2 ปีที่แล้ว +3

    Hey Jimmy, i know this is an old video but i wanted to say it just printed incredibly helpful for me. I was stuck and couldn't figure out why my expression pedal sweep was going all the way up and then back down. That ring/tip switch inside the pedal was exactly what i needed!

  • @Margilio5150
    @Margilio5150 3 ปีที่แล้ว +2

    BOSS ES-5 has trails options, input for one expression pedal which can be assigned to each loop as needed, or access to their Internal virtual expression pedal for swells or as a tremolo, assign it to an existing switch or to one of the 2 additional external foot-switch inputs… if you have a rig where you really like your pedals it’s a great option. I sold mine and just use an Hx Stomp due to its form factor.

    • @HeyWorshipLeader
      @HeyWorshipLeader  3 ปีที่แล้ว

      That's awesome

    • @davevanconant7488
      @davevanconant7488 2 ปีที่แล้ว

      @@HeyWorshipLeader ES8 does the same thing. it's the bigger brother version of the ES-5.

  • @kenjiwhe
    @kenjiwhe 3 ปีที่แล้ว +3

    FYI, I just received my Dunlop 1x Dunlop DVP5 Volume (X) 8 Pedal, immediately opened it to flip the dip switch. It ain't has one! But live is good as it fully works out of the box with the Stomp XL. No settings changes required. Combining Wah and Volume? No problem!
    I do feel more and more restricted now with the measly 8 blocks, haha!

  • @artasprer1885
    @artasprer1885 4 ปีที่แล้ว +2

    Enjoy your pilot controller! Congrats!

  • @devingrubbs
    @devingrubbs ปีที่แล้ว

    Thanks for the info on the dunlop pedal. Looks like previous owner had it in Tuner / Tip. Got it working on my Stomp now!

  • @Elektrifekt
    @Elektrifekt 3 ปีที่แล้ว +1

    Found this channel yesterday! Absolutely love the content.

  • @josephestes7076
    @josephestes7076 2 ปีที่แล้ว +1

    In traditional rigs, the source audio EQ2 would do the 1 expression pedal with 2 functions thing. The switching happens in the EQ2.

  • @a.sarfer
    @a.sarfer 4 หลายเดือนก่อน +1

    Great video!
    Any ideas on how to do the same with a Hotone Soul Press 2?

    • @HeyWorshipLeader
      @HeyWorshipLeader  3 หลายเดือนก่อน

      I;ve never used one, but would imagine its the same

    • @ahmedmostafaguitar6472
      @ahmedmostafaguitar6472 3 หลายเดือนก่อน

      It’s worked??? Toggle from wah to vol ??

  • @DaviSiqueiraSilva
    @DaviSiqueiraSilva 4 ปีที่แล้ว +1

    I've just got my dunlop dvp4 yesterday to use it with my hx stomp! Awesome timing! Thanks for the video!

  • @JaffaRoad
    @JaffaRoad 2 ปีที่แล้ว

    Great video about how to connect AN expression pedal to hx stomp, I would love to see one on how to connect TWO expression pedal to HX stomp, I can t figure it out. Do they have to be the SAME make and model ( Its just a pot so I cant see why that would be) ?
    I am new to the Helix world - I am trying to create a tiny fly rig out of a stopm xl and two expression pedals that will replace a heavy pedal board in certain settings.
    I need to be able to have two expression pedals - one for volume swells and the other to control various other parameters on the fly with my feet.
    How do you connect two different expression pedals and get them too work ( or will this only work of they are the same?)
    I have an M-audio expression pedal
    I have an Line 6 ex1
    I have an Ernie ball volume pedal jr
    If I connect any one of these to the expression jack and assign them to expression pedal 2 any one of them works.

    If I connect any two of these to the expression jack with a stereo TRS y cable - they either dont work anymore or one of them works but not as expected.
    I tried playing around in global settings with the inversion of the tip or sleeve.
    What am I missing?
    (Thanks for making theses tutorials, can be a huge time saver for new users)

  • @JaffaRoad
    @JaffaRoad 2 ปีที่แล้ว +1

    what reverb / shimmer pedal is that at 10:00?

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      That is a Shimmer algorithm on my favorite Reverb ever… The @jetpedals Revelation version two

    • @JaffaRoad
      @JaffaRoad 2 ปีที่แล้ว

      @@HeyWorshipLeader I love it, have you been able to get close to that in the helix? if soI would love to get that patch

    • @JaffaRoad
      @JaffaRoad 2 ปีที่แล้ว

      @@HeyWorshipLeader have you been able to get close to it with the helix ? It is so smooth it is similar to the shimmer on mar reverb, but better.!

  • @TriviumMarv
    @TriviumMarv 2 ปีที่แล้ว +1

    I have a problem with the "sweep spot" when using wah-Blocks.. So the whole sweep 0-100 happens between the heel and toe position in about 10% of the whole way. Volume Blocks etc function just perfect: 0 heel position to 100 toe position. Does anyone know what to do to fix this issue with the wah blocks??
    Brilliant video by the way helped me a lot, thank you!

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      glad it was helpful...idk about the problem except you can set your beginning and end points...I'd just make sure something isn't set wrong

    • @adamdyble5198
      @adamdyble5198 ปีที่แล้ว

      Did you ever manage to fix this? I have the exact same problem

  • @El_Maycol
    @El_Maycol 3 ปีที่แล้ว +1

    maybe a little late to this video but Hotone has pedals to do this, vowpress is volume/wah in the same unit, they have another pedal soul press which is volume/expression

  • @rommelprz7
    @rommelprz7 2 ปีที่แล้ว

    Do you recommend the Dunlop Volume X mini?

  • @antonioguedes6903
    @antonioguedes6903 ปีที่แล้ว

    I was actually wondering how to use the DVP4 as volume with analog pedals and as expression with digital. Do you know what is necessary? Thanks!

  • @andreginho
    @andreginho 2 ปีที่แล้ว +1

    Hi. Thank you for your videos. They are great and well explained.
    I wonder what pedalboard you are using and how do you power this setup.
    Thank you once again.

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว +1

      Thanks man! I have the mono lite plus and power with the Cioks DC7

    • @andreginho
      @andreginho 2 ปีที่แล้ว

      @@HeyWorshipLeader 💙💪

  • @ahmedmostafaguitar6472
    @ahmedmostafaguitar6472 3 หลายเดือนก่อน

    It’s possible to make it with hotone soul press ii
    Press to change from wah to volume ????

  • @timomommers3285
    @timomommers3285 4 ปีที่แล้ว +1

    Congrats to the winner 🙌🏻🥳 Nice video Jimmy. Keep up the good work. Have a nice day. 👌🏻✨

  • @mingxinli3828
    @mingxinli3828 2 ปีที่แล้ว +1

    Will Dvp5 work as well? I prefer the size of Dvp5 but seems like the Dvp5 don't have the tip and ring invert function

  • @hardstones17
    @hardstones17 4 ปีที่แล้ว +1

    this is neat! I plan to get the Mission Control helix pedal though so this is much easier to achieve with that and its integrated switch!

  • @CraigCrider
    @CraigCrider 4 ปีที่แล้ว +2

    Man, the addition of Command Center makes a basic expression pedal SUPER handy. Thanks!

  • @ninoyeon
    @ninoyeon 2 ปีที่แล้ว +1

    I have a Y cable with trs and dual ts.
    Is it okay to plug just one ts cable into the aux?

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      It'll be missing the tip or ring...so it might not work properly on some effects

  • @Philaygah
    @Philaygah 3 ปีที่แล้ว +1

    Don’t you think that sonicake it’s a better option in this case. So you save more slots for other effects etc!?

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      the cool thing is, you can put anything you love in the FX loop and save blocks

  • @steveliberty
    @steveliberty 4 ปีที่แล้ว +1

    Nice video!
    My expression pedal is only expression (m-audio). I installed a toe switch in it, and now I can switch between wah and volume (or whatever) just be pressing down on the toe switch, which I find more convenient than hitting a button on the Stomp. It does consume both "devices" that are available through the aux jack, but it also leaves all 3 footswitches on the Stomp available for other uses.
    Also, you noted that you can save a block by manipulating the channel volume of your amp. Another block saving alternative would be to manipulate the volume parameter in the Output block. Since this one is at the end of the chain, it truly has no impact on your tone, where using channel volume might impact any effects that come later in the signal chain.

    • @HeyWorshipLeader
      @HeyWorshipLeader  4 ปีที่แล้ว

      Yes! You basically made that Line 6 Mission engineering pedal...that's awesome! Very convenient.
      That's true...and probably less confusing! Thanks for sharing!

  • @micheledibella9375
    @micheledibella9375 2 ปีที่แล้ว +1

    Hi, Jimi can I use like a normal volume pedal after my overdrive with the two outputs moved on in my stomp, and at the same time use it with the connection of the third central output connect it to the stomp and deactivate the volume function to use it only as an expression pedal without removing cables?

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      I'm not sure I understand...send a photo of what you are trying to jimmy@heyworshipleader.com and I can try to help

  • @Joe-vc2cc
    @Joe-vc2cc ปีที่แล้ว +1

    I have a problem with my pedal hitting 100 at about midway point. Any tips for that?
    Thanks!

    • @HeyWorshipLeader
      @HeyWorshipLeader  ปีที่แล้ว +1

      Yes...mine was doing that too at first...if you have this same pedal, take off the back panel and make sure the bottom toggle switch is on "ring" not "Tip"

    • @Joe-vc2cc
      @Joe-vc2cc ปีที่แล้ว +1

      @@HeyWorshipLeader that did it, thank you!

    • @HeyWorshipLeader
      @HeyWorshipLeader  ปีที่แล้ว

      @@Joe-vc2cc Sweet!

  • @_marcopalomo
    @_marcopalomo 2 ปีที่แล้ว +1

    Great video! Do the same principles apply to the hx effects? I’m interested in using an expression pedal for volume and wah

  • @haraldkal
    @haraldkal 3 ปีที่แล้ว +1

    Great tutorial dude :)
    I've got a HX Stomp and I was looking at the Dunlop Volume X mini as a go to expression pedal.
    I was looking to make a very light pedalboard using the Pedaltrain PT-Nano-SC.
    Wasn't sure on the wiring and how to set it up, so this video just saved me hours!

  • @raulgrangeiro
    @raulgrangeiro 2 ปีที่แล้ว +1

    You really helped me. Thank you! God bless you!

  • @faunoram
    @faunoram 2 ปีที่แล้ว +1

    Ive been watching your videos and they are amazing for a HX Stomp new owner like me !! I have a question, I have a Ernie Ball VP Junior volume pedal, can I use it like your Dunlop pedal in this video ? Thanks a lot and cheers from South América !!

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว +1

      Glad you're here...the VP Jr doesn't have expression out, so no

    • @faunoram
      @faunoram 2 ปีที่แล้ว

      @@HeyWorshipLeader Thanks for your answer !

  • @robertobetanzos8410
    @robertobetanzos8410 3 ปีที่แล้ว +1

    Hola amigo este pedal sirva para un teclado musical? Muchas gracias

    • @HeyWorshipLeader
      @HeyWorshipLeader  3 ปีที่แล้ว

      It’s not a sustain pedal, but you could assign it to control sustain in a program like Main Stage

  • @gear_vintage
    @gear_vintage 4 ปีที่แล้ว +1

    Congrats Jesse! Happy Holidays future Jimmy and past Jimmy and all, ha ha.

    • @HeyWorshipLeader
      @HeyWorshipLeader  4 ปีที่แล้ว +1

      Haha! I tried. Happy New Year!!!

    • @gear_vintage
      @gear_vintage 4 ปีที่แล้ว +1

      @@HeyWorshipLeader where'd you get the midi cable from? I found a jet micro, and would like to get a cable like you use. Thanks

    • @HeyWorshipLeader
      @HeyWorshipLeader  4 ปีที่แล้ว +1

      @@gear_vintage Here's all my cables! www.heyworshipleader.com/affiliate-shop

    • @gear_vintage
      @gear_vintage 4 ปีที่แล้ว

      @@HeyWorshipLeader thank you so much. Hope that you have a great 2021!

  • @asido111
    @asido111 3 ปีที่แล้ว +1

    In minute 5.00 you mention that you had problem with inconsistent expression pedal value between full heels and full toe, from 0 to 100 back to 0 again. I face same problem here. I already set the dip switch as yours but it keep happens. I use eventide H9 btw, with TS cable. Appreciate if you can suggest something on this, thank you

  • @cyrussolati7829
    @cyrussolati7829 2 ปีที่แล้ว +1

    Hello and thank you for video. I noticed that your expression pedal is controlling both EXP1 and EXP2. I have the same problem here. I thought something is wrong with HX Stomp setup. Basically one expression pedal should only control one of EXPs? Am I right? In your preset, expression pedal controls both volume and wah! Is there a way to disable one of the expressions in HX Stomp? Thanks.

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      I was using a TRS cable and had Tip to EXP 1 and Ring to EXP 2. You can set them to whatever you want in the global settings. 6:52 in the video is where I walk through how I have it.

  • @chriswilliams-lilley3069
    @chriswilliams-lilley3069 6 หลายเดือนก่อน +1

    Watched your post on adding extra foot switches. But adding an expression pedal is on this list. But then I need to either buy another Helix or drop the extra foot switches. Decisions. Decisions. 😂

    • @HeyWorshipLeader
      @HeyWorshipLeader  6 หลายเดือนก่อน +1

      I know man. Struggle is real. Haha

  • @Raydaniel21
    @Raydaniel21 หลายเดือนก่อน

    Hey Worship leader
    For the trs cable connections … the cable you are using on both ends are they trs?

    • @Raydaniel21
      @Raydaniel21 หลายเดือนก่อน

      I am wanting to get this volume pedal for my pedal board connecting to my Hx Stomp XL. But i wanted to confirm if the cable you are using has both ends being TRS connections

  • @blakekeyes413
    @blakekeyes413 2 ปีที่แล้ว

    I just purchased a Jet MCX MIDI pedal and this same volume pedal and will be running a similar board setup.
    Question though. In another video about the MCX, I saw you mention that you can assign preset bank up and down on the JET MCX by going through FS4 & FS5 on the Stomp. Can I do that AND assign/run the Dunlop volume/expression through the expression input in the back of the Stomp? Just trying to figure out how to best setup the Jet MIDI and the volume/expression at the same time.
    Thanks and love the content!

  • @AlecBourneMidiMadScientist
    @AlecBourneMidiMadScientist 4 ปีที่แล้ว +1

    Great video man.
    Congrats to Jesse, you’re gonna love the little Robbie pilot! Rob Perkins is awesome. I would gladly recommend this as a starter midi controller.

  • @kekino
    @kekino 3 ปีที่แล้ว +2

    Great video! only thing i don't understand is the last part, I mean: you set different parameters for EXP1 and EXP2, does it mean that if only 1 expression pedal is connected with a TRS it's seen by the HX Stomp as 2 expression pedal with the exact same setting? (so also in the presets i can use exp1 or exp2 in the same way as they're the same actual pedal?) Otherwise I don't get the "exp1" and "exp2" labels in the Command Center, and moreover I don't get how could work 2 expression pedals connected with an Y cable :D

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      Yes! The HX Stomp sees it as 2 expression pedals...you just can't do both at the same time....meaning if you set one to be volume, you'll lose whatever the second feature is when the heel is down. If you use a spilt cable with 2 exp pedals, you just send commands to each pedal independently

  • @havenlane992
    @havenlane992 2 ปีที่แล้ว +1

    What length is the tts cable that you use to connect the expression pedal?

  • @willparker5736
    @willparker5736 2 ปีที่แล้ว +1

    Can we use the expression pedal with the JET micro midi?

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      They will work together at the same time...however the expression pedal is not midi controlled

  • @EntireHistory
    @EntireHistory ปีที่แล้ว

    so is the effect coming from another pedal, and then through the expression pedal? or is it all coming thru the expression pedal alone?

  • @christianpacode
    @christianpacode ปีที่แล้ว +1

    when push my exp pedal all the way up the volume goes from 0 to 100 and back to zero when I get all the way up. can someone help me ? I just want to make my expression pedal a regular volume pedal

    • @HeyWorshipLeader
      @HeyWorshipLeader  ปีที่แล้ว +1

      That’s one of the main thing this video solves. Did you see it around the 4:30 minute mark. There are even time stamps to help

    • @christianpacode
      @christianpacode ปีที่แล้ว

      @@HeyWorshipLeaderthanks!!

  • @cdk285
    @cdk285 ปีที่แล้ว

    I have a straight up Ernie Ball VP Jr. I don’t feel any of this translates. Help!!!

  • @cinocino9342
    @cinocino9342 2 ปีที่แล้ว

    Ciao, ottimo video!! Ma quindi per impostarlo correttamente come pedale espressione , con polarità normal e coi parametri che vanno da 0 a 100 , i due swich vanno posizionati verso destra come si vede nel video?

  • @hockeyman2274
    @hockeyman2274 ปีที่แล้ว

    Awesome video - saves me space on my pedalboard.!

  • @MegaWumba
    @MegaWumba 2 ปีที่แล้ว +1

    This explains why it was making horrible noise when I tried to use it as an expression

  • @christopherheadcase6886
    @christopherheadcase6886 3 ปีที่แล้ว +1

    Ok I love this! This is exactly what I have been wanting to do... Now small question.... Can I control the x mini and a single switch with a y cable? Considering I only need 1 exp for wah.. that should leave exp2 to be used for another stomp or some other parameter.. Esp when I incorporate a lol Robbie for my tap tuner/ snapshots.
    Any info would he awesome...

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      Yes! I cover it in this video: th-cam.com/video/eafyR_tTdaM/w-d-xo.html

  • @abelgomez5106
    @abelgomez5106 ปีที่แล้ว

    hola sabes configurar el Fender TREAD-LIGHT™ VOLUME/EXPRESSION para la Hx Stomp?

    • @HeyWorshipLeader
      @HeyWorshipLeader  ปีที่แล้ว +1

      I've never used one, but I would just plug it in and see what it does. If it has issues like in the video find out how to switch the polarity

    • @abelgomez5106
      @abelgomez5106 ปีที่แล้ว

      @@HeyWorshipLeader gracias por tu respuesta. Saludos desde Argentina!!

  • @hardstones17
    @hardstones17 3 ปีที่แล้ว +1

    I just got a different brand of Expression pedal and man HX stomp is picky. I found using TRS with it, it had half the throw be EXP1 and the other half EXP2. The only way for me to fix this was to use a regular patch cable and ensure the expression out is ONLY set for exp1 and 2, no FS or preset or it triggers them endlessly. I am actually pretty upset as they declare its supported yet it really isnt.
    I knew I should have just invested in a mission pedal cause this is so much of a headache to get to work correctly. bah.

    • @hardstones17
      @hardstones17 3 ปีที่แล้ว +1

      well since resolved my issue! Line 6 isn't really specific in that you should connect a pedal with TS ideally unless it is specifically supported. My pedal CLAIMS to use TRS or it wont work but that is false, I am able to get it to work 100% on a single regular patch cable and that is great cause that means I can use a splitter and have an extra dedicated switch no problem. Glad I was able to work out the kinks cause this is the smallest all metal expression I could get other then the DOD one.

    • @HeyWorshipLeader
      @HeyWorshipLeader  3 ปีที่แล้ว

      glad you got it worked out man...I know it was frustrating for me at first too!

  • @BlattidaeKimiKon
    @BlattidaeKimiKon 3 ปีที่แล้ว +1

    Nice video, bro! thaks for your job! I have quastion about latency. Can you feel difference between using volume pedal by regular analog way and as volume block at hx stomp?

    • @HeyWorshipLeader
      @HeyWorshipLeader  3 ปีที่แล้ว +1

      that's a great question...I have not noticed. The sweep took a little getting used...plus I went from a larger Ernie Ball VPJR, down to the smaller Dunlop...so some of the difference was probably in the pedal itself.

    • @BlattidaeKimiKon
      @BlattidaeKimiKon 3 ปีที่แล้ว

      @@HeyWorshipLeader thanks for your answer!! Looking forward to try it)))

  • @JCookston1304
    @JCookston1304 3 ปีที่แล้ว +1

    I need some hx stomp routing help. How can I reach out to you?

    • @HeyWorshipLeader
      @HeyWorshipLeader  3 ปีที่แล้ว

      Sorry...just now getting to this. email me jimmy@heyworshipleader.com

  • @davideoverman
    @davideoverman 3 ปีที่แล้ว +1

    I’m interested in the hx stomp to upgrade my worship rig but have a question if anyone could answer. Would I be able to use a mini 3 button foot switch to have 6 total buttons with the 3 on the stomp plus use my volume pedal plus some drive pedals and a mini midi control foot switch and then go direct out?

    • @HeyWorshipLeader
      @HeyWorshipLeader  3 ปีที่แล้ว

      Question: which mini midi controller would you be using...because you could def cut out the 3 button foot switch. But to answer you're question...no. You can have a 2 button foot switch using FS4 and FS5, and run your volume pedal before or after your drives (not in the Stomp at all, or in the fx loop if you needed that for some reason) and then your midi controller via the midi in (and thru if you'll be sending midi signals out)

    • @davideoverman
      @davideoverman 3 ปีที่แล้ว

      @@HeyWorshipLeader I’ve watched a ton of videos mainly yours and I think the jet micro the pre mapped one looks like the ticket for me! I’ve never done anything midi so this will be a new experience

  • @brunovidana7837
    @brunovidana7837 3 ปีที่แล้ว +1

    Is anyone having issues with running a volume into the effects loop?
    My volume goes from almost zero
    anywhere in heel to almost toe.
    Then there’s a sudden and loud rise in volume when I’m all the way to toe.

    • @HeyWorshipLeader
      @HeyWorshipLeader  3 ปีที่แล้ว +1

      Sounds like you need to invert the polarity. Which vp do you have?

    • @brunovidana7837
      @brunovidana7837 3 ปีที่แล้ว

      @@HeyWorshipLeader thank you so much for replying! I have the Dunlop mini (DVP4)

  • @emilianoibarra3537
    @emilianoibarra3537 9 หลายเดือนก่อน

    is it possible to determine min and max values for parameters on the line6 hx one to control with an expression pedal? just like you control the bar underneath the knobs on the eventide h9

    • @HeyWorshipLeader
      @HeyWorshipLeader  9 หลายเดือนก่อน +1

      Yes...And I just got another HX One of my own...and I want to do some tutorials...so let me know anything else you'd like to see as well!

    • @emilianoibarra3537
      @emilianoibarra3537 9 หลายเดือนก่อน

      @@HeyWorshipLeader thats the most important thing that i want to know/learn how to do, another thing is just a personal taste id like to see how i can get metallic sounds with the delay, ping pong delay and reverb, everything on stereo, id like to use this pedal as an fx unit on a dj set on send/return

  • @nofuneral1790
    @nofuneral1790 ปีที่แล้ว

    I'm having a weird issue where the pedal works, but it doesn't register until halfway to heel down, then 0-100% occurs between that halfway point and all the way heel down. Any suggestions?

    • @nofuneral1790
      @nofuneral1790 7 หลายเดือนก่อน

      TRS Cable had the issue of being 0-100 by only moving the pedal half its total distance. When I used a TS Cable it worked fine: 0-100 hell to toe. I just had to invert the polarity of the tip. This was done by going to Global Settings > Preferences > Page 2 > Tip Polarity = Inverted. I did initially open the pedal and change the dip switch to Expression/Ring as indicated in this video.

  • @seitzsoundjohnseitz5396
    @seitzsoundjohnseitz5396 2 ปีที่แล้ว +1

    Great video -- thank you. The background music is a distraction :)

  • @ernestohernandezcenteno6058
    @ernestohernandezcenteno6058 4 ปีที่แล้ว +1

    Thanks bro. This video help me a lot!!!

  • @MartinCraneRockbeast
    @MartinCraneRockbeast 3 ปีที่แล้ว +1

    See the new Blackstar live logic midi controller.

  • @ДанилВыборов
    @ДанилВыборов 2 ปีที่แล้ว +1

    Спасибо!

  • @nuketownbass8153
    @nuketownbass8153 8 หลายเดือนก่อน

    Very helpful. Thanks!

  • @Unsaid77
    @Unsaid77 3 ปีที่แล้ว +1

    Great video! I learned a lot. Thank you man

  • @anthonysthellhammerg4388
    @anthonysthellhammerg4388 2 ปีที่แล้ว +1

    Pretty cool 😎,i think it’s going to help ,see I’m in a tight spot,my main goto amp is taking a dump ,well the tubes are i think god I hope otherwise that means something really bad has happened,anyways,it’s a line6 spider valve hk 2 hd 100 ,it’s kinda old but compared to a lot of !,! No Make it compared to everything else line6 has made in the last 20 years it completely blows the doors off and it makes me wonder O why o why did you guys stop making this it’s a 100 watt tube head with all the modulation built in,Plus my FBV foot controller station and yes it’s really a station has more control buttons on it than i could ever imagine using every single one, So what im getting at besides that and my 4x12 and the hx stomp I had way more modulation than I would ever need but now with my backup,A peavey valve king royal 8 that absolutely none of the connections ins and outs my line6 does I have totally rearranged everything from the ground up,and I use a vol, whammy,and pitch shifter ,was going to sacrifice the vol but after watching your video I may give that a shot ,I just know ,well I’m pretty positive the FBV floor control is not going to work,the cord that hooks up to that looks exactly like the one going into your Wi-Fi router,I will look into it but I’m pretty certain no way , anyways if you got any ideas on how I could lighten my load with the stomp it would be greatly helpful, thanks,great vid btw

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      I bet that FBV hook up is a printer USB connection and will work with the HX stomp. The Stomp is a great solution for sure

  • @Bikesbrewsandbrutaltunes
    @Bikesbrewsandbrutaltunes ปีที่แล้ว

    I'm an atheist and your video helped me out. Checkmate.

  • @schenkerrothmoore
    @schenkerrothmoore 2 ปีที่แล้ว +1

    I like the content of this alot but you are setting a bad example with the over powered drill, In fact you don’t even say screwdriver before you take a drill to it you just say OK good thing I’ve got a drill some people might not be very technical and this is extremely bad example to show them

    • @HeyWorshipLeader
      @HeyWorshipLeader  2 ปีที่แล้ว

      I admit that's true...next time I'll redeem myself!