Hey buddy I would have given you a couple propane tanks instead of you having to spend like 50.00$ a piece for each one!! You would have just had to take them and have them filled for like 20.00$ oh well I guess you already have some now!! Awesome DIY project buddy!! I definitely am excited to see it in youse and if the heater is big enough or not?? I think I would have went with the 30,000Btu one just so it wouldn’t have to run as much as the smaller one would have to!!! It should be awesome for sure and nice and comfortable!!!
Just came across your video. I’m From Minnesota and decided to do the same thing starting last summer and finally finding time to finish by next month. I have a 7x16 with 2ft v nose. I installed a 35k btu furnace heater, all they had left at Milaca unclaimed freight. Hoping it won’t be too big. Shity part is I only had one option for exhaust and it was out the front in the v. I Should have went simple like yours, mines a little busy. I have 6 holes in mine. 1 1/2 inch insulation walls and ceiling, 2 inch foam board on floor, 2 inch foam board in back ramp door. I’ll be using double bunk bed cots while out on the ice.
To help out charging your battery or batteries, switch the trailer wiring to a 7 way system. There is a 12v power in the wiring. You can hook it up to your battery and it will charge when your its connected to your vehicle.
I'm looking to build my 6x12 enclosed trailer the same as yours for ice fishing also interested in the hole supplies you used and what did you use for sleeves
I went with the fish hole buddies for the holes and the sleeves are just 2 fish hole buddy sleeves taped together and I cut the ring off of one of them so it fits through the hole!
How much space between the bottom of the trailer and ground/ice? Wind will blow underneath the trailer ... freeze holes, make keeper the trailer warm tougher. Maybe a skirting system around the outside? Its a sweet modification though.
I definitely enjoyed this video and this kind of content for sure buddy!!! I would definitely love to see more of these kinds of videos!!! Keep up all the hard work buddy!!!
@@BWFilms I forgot to say that you should also put a couple small windows in that unit also!! That would definitely be an awesome upgrade!! Keep up all the hard work buddy!!!
If nothing else. Buy buckets cut. The. Bottoms off And put those in the Floor for the holes
Fisk ya 🇨🇦🇨🇦
Take me fishing
Spearing only
Good job looks nice
Thank you! 👊
Did you insulate walls and if so with what? Or just do ceiling and floor?
I did the walls with 3/4” pink foamular
That thing is sick
Why didn't you use the diesel heater? What's wrong with you!!
I’ll use the truck exhaust next time
Just wondering if you had it out yet? What was the outside temp and did the furnace keep up ok? Thanks for a great video!
Had it out a few times now in as cold as -10 and the furnace keeps up in those temps!
Damn I love coming home from work and seeing you posted!! Keep up the work, love your content!! 😁
Thank you! 👊🏻
sticker game is on point.
Hey buddy I would have given you a couple propane tanks instead of you having to spend like 50.00$ a piece for each one!! You would have just had to take them and have them filled for like 20.00$ oh well I guess you already have some now!! Awesome DIY project buddy!! I definitely am excited to see it in youse and if the heater is big enough or not?? I think I would have went with the 30,000Btu one just so it wouldn’t have to run as much as the smaller one would have to!!! It should be awesome for sure and nice and comfortable!!!
Thanks some fancy fishing. Like it
You’re hilarious dude, whether it’s bangin birds or drilling holes. So funny
That’s clutch asf
This is really helpful, thank you and more of it please.
👊🏻
Love the content keep it up go slay some biggins in it now I wanna see a 30 in walleye caught out of it
Just came across your video. I’m
From Minnesota and decided to do the same thing starting last summer and finally finding time to finish by next month. I have a 7x16 with 2ft v nose. I installed a 35k btu furnace heater, all they had left at Milaca unclaimed freight. Hoping it won’t be too big. Shity part is I only had one option for exhaust and it was out the front in the v. I Should have went simple like yours, mines a little busy. I have 6 holes in mine. 1 1/2 inch insulation walls and ceiling, 2 inch foam board on floor, 2 inch foam board in back ramp door. I’ll be using double bunk bed cots while out on the ice.
That’s gonna be a great setup! The heater will keep you warm that’s for sure! 👊
Pretty dope
Good job.
To help out charging your battery or batteries, switch the trailer wiring to a 7 way system. There is a 12v power in the wiring. You can hook it up to your battery and it will charge when your its connected to your vehicle.
That’s a good idea, I’ll look into that!
Bitchin set up!
Thank you!
awesome
This is awesome. Nice build
Turned out nice!
Loved it!
I'm looking to build my 6x12 enclosed trailer the same as yours for ice fishing also interested in the hole supplies you used and what did you use for sleeves
I went with the fish hole buddies for the holes and the sleeves are just 2 fish hole buddy sleeves taped together and I cut the ring off of one of them so it fits through the hole!
Have been watching all the recent fishing videos and stumbled upon this one, well thought out and turned out sweet bro!
Thank you! 👊🏻
How much space between the bottom of the trailer and ground/ice? Wind will blow underneath the trailer ... freeze holes, make keeper the trailer warm tougher. Maybe a skirting system around the outside? Its a sweet modification though.
About 14 inches! Hoping there’s enough snow to bank it otherwise I’ll have to get skirts!
Did you ever fill in your gas line hole? Or leaving it for a nice mouse door?
I filled it in 🤣🤣
@@BWFilms good deal. Better than find mouse shat everywhere next season
AMAZING VIDEO
Thank you! 👊🏻
That looks good. Nice job
Thank you! 👊🏻
Great build bud
Thank you!
I enjoy
👊🏻
I definitely enjoyed this video and this kind of content for sure buddy!!! I would definitely love to see more of these kinds of videos!!! Keep up all the hard work buddy!!!
👊🏻
@@BWFilms I forgot to say that you should also put a couple small windows in that unit also!! That would definitely be an awesome upgrade!! Keep up all the hard work buddy!!!
What material did you use for the wheel wells covers inside the house ? Those are nice
DPI wall paneling from menards! Comes in a 4x8 sheet. Merry Christmas!
@@BWFilms merry Christmas