@9:49 login and password, where are you getting this info? I've tried every login and pass I've created for this. If someone replies to this, please add a timestamp to which you are referring to. Thank you very much!
**UPDATED** but now i encounter another problem instead. i still cant open the web version on any browser or any vm machine as it says took long to respond. i checked the network settings and i used same as yours. so what could be the problem here? ok so apparently i figured out the solution. since i'm using wireless network instead of ethernet, i'll just have to change the network settings to bridge adapter instead of NAT. ive seen you answered the question about this so yeah i went through that network config many times and it worked! also thank you for this amazing tutorial video. its so fun and helpful to understand for a beginner like me :D
Thanks for the update, i was facing the same problem. It would have been more helpful if there had been guidance on adjusting the network settings within VirtualBox.
so i have a problem when i try to log in in linux what is the username and pass word that should i use admin pbx pass or the configured one in the setup
@@wolfzarrowalarms A "kernel panic" is an unexpected condition where the kernel of the operating system, which is the core component managing the system's resources, encounters an unrecoverable error. When you encounter a kernel panic in a virtual machine running on VirtualBox, it typically indicates an issue with the virtual machine's configuration or the guest operating system itself. Could you try completing the installation on a different PC? and ensure virtualization technology is enabled in the bios
@@billysoftacademyYes I Can Try That! And Also When I Go To Google To Type In IP Adresses It Says Site Took To Long To Load ERR CONNECTION So I Don’t Know How To Fix That
@@billysoftacademyOk yes I will try that. And also when I type in IP addresses to access web interfaces on google it says site took to long to load err connection times out
@@satishsurla2571 okay it sounds like you are having an issue with your network configuration. Can you retry your installation using the steps outlined in this article billysoftacademy.com/read-this-tutorial-to-learn-how-to-install-freepbx-15-on-virtualbox-6-1-in-a-few-simple-steps/
Hi you ca n try installing virtualbox guest additions software or accessing freepbx from a different browser. Im not certain at which point the issue happens for you
@@trincolio Okay if you are referring to the system login at minute 10:01, its actually normal. Linux doesnt echo back the password characters. Just make sure you're typing in the correct password and hit the enter key on your keyboard
@9:49 login and password, where are you getting this info? I've tried every login and pass I've created for this. If someone replies to this, please add a timestamp to which you are referring to. Thank you very much!
(Solved) @9:49 login screen, you have to type "root" in the login (no quotes) and password is your root password create at the gui @5:46
I love the background music, and the tutorial is very helpfull Thanks
bro i after entring ip adrress in browser, nothing comes up
**UPDATED** but now i encounter another problem instead. i still cant open the web version on any browser or any vm machine as it says took long to respond. i checked the network settings and i used same as yours. so what could be the problem here?
ok so apparently i figured out the solution. since i'm using wireless network instead of ethernet, i'll just have to change the network settings to bridge adapter instead of NAT. ive seen you answered the question about this so yeah i went through that network config many times and it worked!
also thank you for this amazing tutorial video. its so fun and helpful to understand for a beginner like me :D
Thanks for the update, i was facing the same problem.
It would have been more helpful if there had been guidance on adjusting the network settings within VirtualBox.
hi there i wanna know is the ip you showed in the video is the default ip i have to use to login freepbx on the web? *updated* i figured it out.
after installation how to go on web page
for those of you whose ip adrress dont work in browser use "bridged network" in setting>network
Everytime I try to enter a IP address in Google it says err connection timeout site took to long to load.
Thanks
so i have a problem when i try to log in in linux what is the username and pass word that should i use admin pbx pass or the configured one in the setup
user: root
Which version of oracle virtual box did you use
virtualbox 6.1
@@billysoftacademyeverytime I start the machine it says kernel panic fatal exception and I don’t know how to clear that
@@wolfzarrowalarms A "kernel panic" is an unexpected condition where the kernel of the operating system, which is the core component managing the system's resources, encounters an unrecoverable error. When you encounter a kernel panic in a virtual machine running on VirtualBox, it typically indicates an issue with the virtual machine's configuration or the guest operating system itself. Could you try completing the installation on a different PC? and ensure virtualization technology is enabled in the bios
@@billysoftacademyYes I Can Try That! And Also When I Go To Google To Type In IP Adresses It Says Site Took To Long To Load ERR CONNECTION So I Don’t Know How To Fix That
@@billysoftacademyOk yes I will try that. And also when I type in IP addresses to access web interfaces on google it says site took to long to load err connection times out
hello, what should be the login and password in 10:08 ?
hie😀 at 10:08 thats where you set your own custom username and password
username is root and pass is the password u set in the gui interface
@@cheemzboithx so much
After installation i typed the same ip that available in free pbx after a complete login but still it is on looding screen
Hi, i think you need to double check the virtual box network adapter configuration.
Bro i need help
Installation sources is showing error setting up base repository it's not working please solve my problem
hie satish are you using the official freepbx iso image file? also check your virtualbox / virtualmachine network settings
@@billysoftacademy yes sir I am checking but I am opening and seeing local midea error... Asking url or proxy so please help me
@@satishsurla2571 okay it sounds like you are having an issue with your network configuration. Can you retry your installation using the steps outlined in this article
billysoftacademy.com/read-this-tutorial-to-learn-how-to-install-freepbx-15-on-virtualbox-6-1-in-a-few-simple-steps/
when i try to type in the password nothing types
Hi you ca n try installing virtualbox guest additions software or accessing freepbx from a different browser. Im not certain at which point the issue happens for you
@@billysoftacademy I didn't think you would respond but i mean the login page on the virtualbox after restart
@@trincolio Okay if you are referring to the system login at minute 10:01, its actually normal. Linux doesnt echo back the password characters. Just make sure you're typing in the correct password and hit the enter key on your keyboard