I used a heavy duty electronic led flasher. EP34L #12119 says leds/2-6 lamps 12.8 volts/ 162w max trailering dot 3 prong led modified relay 😢 still flashing hazards. Has 4 led straps 2 under tank 2 under rear wheel. These straps work without the ignition and I didn't count them. I only counted the 4 turn signals. Not sure but I would think so since they are the only led controlled by t 0:25 he handlebars switch. 😢😢
Hi i need your expertise, or some one else who can help. i have the same bike. Turn signals are not working, front one's stay on the whole time, but don't blink when switch is pressed. Dash board light that shows signal also is not working. I hear clicking in relay. Please help. wondering if i have bad relay, eventhough it clicks. but why dashboard light is not working. thank you. normal stock turn signals. i do not have LED.
If you check my video I added 2 diodes to the turn signal light to fix hyper flashing. th-cam.com/video/FRygAD19XPg/w-d-xo.htmlfeature=shared Let me knownif it helps with all lights on at the same time
Try removing the flash indicator bulb from your gauge.I had the same problem when installing LED flashers and removing(or replacing with led bulb) this tiny bulb was the solution.
Worked perfectly on my 2001 Vstar 650....
Works perfect on my 2010 650. Thank you!
Thanks youtube a direct search on this video and you finally found it like 40 down the line.
gracias amigo, funciono perfecto en una vstar650A 2008
This fixed the hyper flash but I still have no individual blinkers they are still flashing like hazards. And help would be aporeciated
Also now the indicator on my speedometer doesn’t work. This is a 2009 vstar 650 classic
lola, do you have a video where you explain where you get the cables for the 3-pin relay?
So what do we do with the other two wires ?
Is this the same for a 2008 1100?
Parts list- what Flasher Relay did you use>
pause it at 10 sec. and everything is there
I used a heavy duty electronic led flasher. EP34L #12119 says leds/2-6 lamps 12.8 volts/ 162w max trailering dot 3 prong led modified relay 😢 still flashing hazards. Has 4 led straps 2 under tank 2 under rear wheel. These straps work without the ignition and I didn't count them. I only counted the 4 turn signals. Not sure but I would think so since they are the only led controlled by t 0:25 he handlebars switch. 😢😢
didn't work, all I got is 4 way flash. Removed the turn signal idiot light and works perfect.
Same ehre might have to do same thing remove idiot light
To those thay say it didn't work, I made a video fix8ng the hyperflashing and works perfect
Hi i need your expertise, or some one else who can help. i have the same bike. Turn signals are not working, front one's stay on the whole time, but don't blink when switch is pressed. Dash board light that shows signal also is not working. I hear clicking in relay. Please help. wondering if i have bad relay, eventhough it clicks. but why dashboard light is not working. thank you. normal stock turn signals. i do not have LED.
If you check my video I added 2 diodes to the turn signal light to fix hyper flashing.
th-cam.com/video/FRygAD19XPg/w-d-xo.htmlfeature=shared
Let me knownif it helps with all lights on at the same time
@LaibaMeroz were you able to figure out the problem? I have the same exact scenario right now
did not work..
Does not work
Didn't work. All flashers flash at the same time. Thanks anyway.
Try removing the flash indicator bulb from your gauge.I had the same problem when installing LED flashers and removing(or replacing with led bulb) this tiny bulb was the solution.
do you have a video where you explain where you get the cables for the 3-pin relay?