FAQ Fridays: RIDE HEIGHT ADJUSTABLE CLIP
ฝัง
- เผยแพร่เมื่อ 23 ม.ค. 2020
- In this FAQ Friday, Michael our R&D Manager explains how the system works with stock springs and Eibach's PRO-LIFT-KIT (Lift Springs).
Instructions for your PRO-TRUCK Sport Shocks can be found by going to eibach.com/instructions and then input the part # of your Eibach product. - ยานยนต์และพาหนะ
Where can i find instructions on how to adjust the clips?
I just bought the adjustable struts and new eibach coil springs for my 2015 Silverado. So do I set the clips on the bottom? Also new eibach shocks for the rear, do those go boot up or down?
I have a 2016 4 Runner with the Eibach Pro Truck Lift. I have had it on my vehicle a little over a year now. Would I be able to use the Eibach Pro Truck 2.0 front coil overs with my Pro Truck 1 rear shocks and springs?
Is it possible to adjust once the strut has been installed? If one wanted to change the ride height. Ty
Is it safe to offset the clip height setting from driver to passenger side to account for the driver side lean in Toyota 4Runner/Tacomas?
We haven't confirmed that so try at your own risk. The adjustment heights may also be too great to level it out, creating a left side that's now too high.
If I get this pre assembled do you guys put it on the bottom set or 2nd
We do not sell them pre-assembled
There are retailers to sell this kit assembled, but they are unassembled from Eibach. You will have to speak directly with the retailers on where to set your clip.
I have a 2015 f-150 on 2.7 springs. Passenger side touches my UCA and tiny little bumps. UCA upgraded to camburgs, any ideas?
Hi, please give us a call at 800-507-2338 extension 114.
You can also fill out the form on our website: eibach.com/us/p-187-technical-support.html
Lies my gmc sierra denali 1500 4wd front higher set bottom settings..
@@GhettoFabulous670 it's been over a year 😔😪 no changes 👎 end up putting block 2inch 1/2 rear.. ride real rough.. 😑😬 small bumps feel like Grand Canyon
1 min long video to say "look at the instructions"
Where can we find real clip setting instructions before we buy? I need a video for Tacoma telling us what the clip settings are. Not just saying a general stock height to level with rear???
It is on the website. If using the stock springs, the lowest clip is stock. Middle is about 1" and 3rd clip is about 2"
With our springs, the lowest clip is 2" of lift. The middle and top clip are suggested to only be used if the vehicle has extra weight added, such as steel bumpers or winch. Without added weight there maybe a degradation in ride quality using the middle or top clip.
You can find the instructions by going to eibach.com/instructions and then input the part # of your Eibach product.
@@EibachUSA Awesome, thank you for your quick and professional response 🤙🏻
@@EibachUSA could you tell me what level the stage 2 coil overs come set at for Tacoma? 2 or 2.5 inch???
@@PNWXOverland It is at 2"
@@EibachUSA what about skid plates? 3rd notch?