Phoenix Contact has so many great products...They have a small motor starter that you could feature, then follow up with how to integrate it in a Rockwell CompactLogix or Micro800 program.
Very good info. Have had some problems with different MGFs of DIN rail. Some components just don't attach to some DIN rail. Seems the width just isn't right. It is either the DIN rail or the mounting base of the devise.
I agree. And some manufacturers need to tighten their tolerances. Sometimes components are loose, sometime you snap the clips trying to install the components.
I know, I think back to all those times I had to reach into a tight spot to put a wire in the side of a terminal block. That raised rail would have been great.
Any info on grounding with aluminum? The oxide layer in aluminum can be detrimental to the path. Take a volt meter and measure continuity on an aluminum back plane. Many panel builders use grounding terminal blocks and the generally poor grounding characteristics of aluminum are pretty much exclusively why I generally don’t use it.
In theory it should not be an issue because ground is a non-current carrying conductor but I have the same concerns. I'd like to talk to them more in depth about this. There's also copper DIN rail
Been a automation tech for about a year now, your videos really helped me get started!
That's great to hear!
Big fan...of Phoenix Contact and Tim's videos!!
Thanks to both!
Glad to hear it Todd. Any additional topics you would like to see with Phoenix Contact?
Phoenix Contact has so many great products...They have a small motor starter that you could feature, then follow up with how to integrate it in a Rockwell CompactLogix or Micro800 program.
Thank you for short and to the point video
Glad it was helpful!
I use that elevated rail with flex I/O, I use 15mm stand off on my standard terminal bases and 7.5mm for my power distribution rails.
There are many times I wish I had used it.
Very good info. Have had some problems with different MGFs of DIN rail. Some components just don't attach to some DIN rail. Seems the width just isn't right. It is either the DIN rail or the mounting base of the devise.
I agree. And some manufacturers need to tighten their tolerances. Sometimes components are loose, sometime you snap the clips trying to install the components.
Never saw the raised DIN railm before, nice. We've used a lot of copper DIN in our switchgear too. No idea on price but glad im6not purchasing it.
I know, I think back to all those times I had to reach into a tight spot to put a wire in the side of a terminal block. That raised rail would have been great.
Any info on grounding with aluminum? The oxide layer in aluminum can be detrimental to the path. Take a volt meter and measure continuity on an aluminum back plane. Many panel builders use grounding terminal blocks and the generally poor grounding characteristics of aluminum are pretty much exclusively why I generally don’t use it.
In theory it should not be an issue because ground is a non-current carrying conductor but I have the same concerns. I'd like to talk to them more in depth about this. There's also copper DIN rail
I am in automation industry since last 16 years but I don't know acronym of DIN. 🤣🤣🤣🤣
Haha, me neither
Hi Tim , excellent video. Can you make a video about function generator instruction ?
Do you mean our encoder simulator?
In an AC combiner box would these Din raise be carrying current?
I guess you are talking about grounding though the DIN rail? Ground is a non-current carrying conductor so it should be minimal
You're taller than I ever imagined.
😂