It scares me to think how much a machine like that would cost to buy new and who ever let it get into that condition needs a good thrashing. Thank you for sending me the formula for your home made white cleaning solution”. It works just like on your TH-cam channel and is very cheap to make. This will make my restorations much easier. I like the silver and yellow colours and it was an awesome restoration. Please consider adding a three core power cable as suggested by a previous poster as it is easy to do and may save your life. Cheers mate, Stuart 🇦🇺
@@scroungasworkshop4663 that's what I thought straight bullshit replies as usual no straight answers. If he would reply I would have it.....but you know that already. So my best guess is its all smoke and mirrors and nothing other than a lie. Kinda like your post which would suggest your an internet troll and in real life have no friends. Congratulations liar and great job trolling.
Great restoratin! Few safety advices! 1. Be cautious when working with old machines - most of them are painted with lead paints and lead is very, very bad for your health. If you have no mean of checking the paint for lead, use good dust mask to protect your lungs. 2. When first starting old, full-metal housing machines, ALLWAYS use good ruber gloves and first check the housing for any electricity, for example with voltage tester, multimeter or other devices. If there is no voltage, then touch it with bare hands. Machines with metal housings are dangerous since, if there is damage on some wire, whole machine can get under high voltage, especilay if there is not grounding. Full respect for your work! One question too. What is that white liquid you used to clean gears?
I love the minimalist approach! Just goes to show that you can do an amazing and beautiful restoration without a bunch of fancy tools or shop. Nice job!
Just a suggestion on painting ... when doing these types of restorations, you should NOT paint metal to metal contact areas, like the bearing seats. These seats are precision machined to slip fit the bearings and adding a layer or two of paint (especially some thicker epoxy paints) can make it very difficult to re-seat the bearings when reassembling the unit.
When I was 16 I used to make ball and roller barrings. and you are talking fraction within fractions. I wasn't very good I got board and inpatient. It was all done by hand
These music reminds me of going to the dentist. Its either this or Kenny G. The music doesnt help while the dentist is doing something about your root canal.
Seriously!? C'mon dudes, it's fake - he cleaned the parts and then painted them silver metallic, it's the exactly same color as the other parts he painted. He do these kind of little fake things in his videos.
Хорошо постарался;) но зачем колотить по подшипникам молотком без наставки? И ещё крашенные валы, пружины и шестерни... Непонятно зачем, неизвестно на кой :))
Len Gaming that or put a metal block on top of the bearings and strike that with the hammer-make sure it’s centered- that should at least be better than striking the bearing from side to side.
This Vietnamese guy did flowering amazing job with minimum tools , technology and tools instead he used his brain . All I can say is : bravo bravo bravo! My name is saeid kharrat I live in California United States of America
15:45 Chems for the veggies Jum Jum .... Well, when his 1 chamber septik tank is full and he knocks a hole in it, I guess the plants will have a fun time hehe !
@@ernestobevilacqua7288 ... Yes @15:50 you can clearly see a long splined part on the side of the bowl ... look closely at the finish on the TOP end of the part ... same silver mat finish as everything else. Then at 16:30 you can see the SAME part (next to the big spring) with the precision slip fit finish where the paint was obviously removed. Don's really have an issue with him painting these parts but definitely not the the metal to metal contact areas ;)
you don't have to paint the internal mechanisms or the internal parts of the body. the paint will peel off and strain the movements. mask the holes and do not paint the gears.
Great job! Changing bearings and seal is the heart of any rebuild, and you got them all. One suggestion, don't get paint in any of the bearing mounting surfaces as in the yellow casting. Put a thin coat of grease on the area where the bearing seats, and it will wipe clean with a rag once painted. Don't put grease on the outer hace either; bearings are made for a metal to metal fit. Keep up the excellent work!
am I the only one found it strange? 15:30 the solution looks a bit murkier than 15:45, which is more cleaner/whiter? and not a single sign of rust contaminated solution?
@@Claews Sorry to inform you that what you thought was a honest video, turned out to be just another bullshit performance. Unfortunately most people can't touch hydrochloric acid with their bare hands. And also didn't you find it a miracle that every part was the exact same color??? When soaking multiple metal parts in a tub of acid the end result will be that each of the parts will have slight variances in their color. Don't let the Asians lie to you!!! Remember they like to paint everything...lol😁😁😁 P.S. Koreans and Japanese excluded. They both have a very strong work ethic.
You do great work but you need to mask off the inner portions of the machines before you paint them, the overspray can contaminate bearings and interfere with correct heights during assembly.
Clever intro. Better than the phony mail delivery box. The trick with the watered milk and painted parts - you waste milk! The paint will come of the metal parts where there is contact, mix with grease and gum up the works.
I love how this is one of the few people doing this without trying to make himself look like he is poor and living in a hut. Honesty is hard to find in these types of videos.
Good mourning, hi very good working good luck, in your future mechanic
very good job exllent restoration detail work was good awesome well done
At last...........................a true restoration! Not just a clean up and paint!!!!!!! My hat is off to you.
Great work with little resources
GOOD. JOB. FORM. MISSISSIPPI. USA
Watching from Mizoram,INDIA
Very good very nicy...
Man! I love doing this stuff, but I have to admit, I get almost as much satisfaction watching it and don't have to get my hands dirty.
Αυτό που θαυμάζω σ' εσένα είναι ό,τι με λίγα εργαλεία και πάντοτε με συμβατικό τρόπο καταφέρνεις αυτό το σχεδόν τέλειο αποτέλεσμα.Εύγε!
If I had the money I would send this young man new power tools to make his work easier for him. What great work you do!
Thats really cool! Nice restoration!
Excelente trabajo ,felicidades
Nice work with limited resources
That is some very good work you do, God has certainly blessed you with a great talent ! Thank You for the video !
THANKOU
good work, congratulations!
It scares me to think how much a machine like that would cost to buy new and who ever let it get into that condition needs a good thrashing.
Thank you for sending me the formula for your home made white cleaning solution”. It works just like on your TH-cam channel and is very cheap to make. This will make my restorations much easier. I like the silver and yellow colours and it was an awesome restoration. Please consider adding a three core power cable as suggested by a previous poster as it is easy to do and may save your life.
Cheers mate, Stuart 🇦🇺
Stuart G. Australia. What is the formula?
Pork Chop. Mmmm no please or thank you. Just “what’s the formula”. Why don’t you ask him yourself.
@@scroungasworkshop4663 that's what I thought straight bullshit replies as usual no straight answers. If he would reply I would have it.....but you know that already. So my best guess is its all smoke and mirrors and nothing other than a lie. Kinda like your post which would suggest your an internet troll and in real life have no friends. Congratulations liar and great job trolling.
Good job! Keep going!
Great restoratin! Few safety advices!
1. Be cautious when working with old machines - most of them are painted with lead paints and lead is very, very bad for your health. If you have no mean of checking the paint for lead, use good dust mask to protect your lungs.
2. When first starting old, full-metal housing machines, ALLWAYS use good ruber gloves and first check the housing for any electricity, for example with voltage tester, multimeter or other devices. If there is no voltage, then touch it with bare hands. Machines with metal housings are dangerous since, if there is damage on some wire, whole machine can get under high voltage, especilay if there is not grounding.
Full respect for your work! One question too. What is that white liquid you used to clean gears?
I think this is in China and they have an RDA for Pb. ;)
Not good for the veggies either
Buen trabajo
Que producto usas para la limpieza?
your work is getting better every time...well done
What the white solution you use for restore gears?
👍👍👍👍👍👍👍👍👍
It's my first time seeing a cutting machine like this one. It's very cool great video.
I love the minimalist approach! Just goes to show that you can do an amazing and beautiful restoration without a bunch of fancy tools or shop. Nice job!
Just a suggestion on painting ... when doing these types of restorations, you should NOT paint metal to metal contact areas, like the bearing seats. These seats are precision machined to slip fit the bearings and adding a layer or two of paint (especially some thicker epoxy paints) can make it very difficult to re-seat the bearings when reassembling the unit.
I taught about that too, those parts, as well as the gearbox inside should had been masked off before painting.
When I was 16 I used to make ball and roller barrings. and you are talking fraction within fractions. I wasn't very good I got board and inpatient. It was all done by hand
Hey just a good way to put the bearings together use your vise, prefect colors
hi, what do you use at 15:15 mints? thanks
These music reminds me of going to the dentist. Its either this or Kenny G. The music doesnt help while the dentist is doing something about your root canal.
thats sick
What is the white mix you use in the water to clean metal? The one you use with a plastic bag cover. Nice video !
What's the producto you used in tha step? Please give us the name and where can we buy it. It's wonderfull!!!!
Seriously!? C'mon dudes, it's fake - he cleaned the parts and then painted them silver metallic, it's the exactly same color as the other parts he painted. He do these kind of little fake things in his videos.
@@jrand2631 Sorry.. it's my first video of him. Didn't know
@Liverpool Campeao Mundial 2019 então... Vlw :)
@@jrand2631 Also he is not the only one who does that: th-cam.com/video/LSDKBmKFB3Q/w-d-xo.html&t=848
How in the world does it guy as young as you learn to do this kind of stuff? You amaze me sir you amaze me
What is the white liquid you soaked the parts in???
Nicely done! Looks as good as new.
What is the solution you use to make the gears come out so shiney and bright?
Great Job ,👍
Súper bueno
That piece of rebar you cut appeared to be very brittle in that it snapped rather than cut like normal.
Хорошо постарался;) но зачем колотить по подшипникам молотком без наставки? И ещё крашенные валы, пружины и шестерни... Непонятно зачем, неизвестно на кой :))
Это не краска, а покрытие цинком
Этот нежный звук молотка по подшипникам...
А покрашеные превалочные поверхности и посадочные отверстия тебя не удивили? Это называется побелить покрасить а не рестоврацыя)))
Excellent job on the restoration. Love the paint work as well... WELL DONE!!! 10/10
Amazing restoration. You did a great job. I just subscribed and look forward to future videos. Happy New Year!
做ˊ的節目學到好枝能
Very good restoration on a very well built cutting machine. When was the machine made?
A csavarokat milyen folyadèkba rakod hogy olyan szèpek lesznek? Köszi
GREEEEAAAAT JOB. KEEP UP THE GOOD JOB. YES SIRRRRRR
Nice introduction. Loved that.
Great restore....
You should invest in a tiny press to press in your new bearings, hammering them can really easily deform them and make more friction...
Len Gaming that or put a metal block on top of the bearings and strike that with the hammer-make sure it’s centered- that should at least be better than striking the bearing from side to side.
@@st3althyone True, he could also use a socket in the right size
This Vietnamese guy did flowering amazing job with minimum tools , technology and tools instead he used his brain . All I can say is : bravo bravo bravo! My name is saeid kharrat I live in California United States of America
Woo good 💯👌👍
What’s the milky solution you soak the hardware in boss? Great resto!
15:45 Chems for the veggies Jum Jum ....
Well, when his 1 chamber septik tank is full and he knocks a hole in it, I guess the plants will have a fun time hehe !
Great concept to recycle indeed, bud damages nature even more on big scale human kind is lost.
what liquid didi you use for the gears? the result is beatiful!!
@@cmahoney_photo you are right... its a fake!!
@@ernestobevilacqua7288 ... Yes @15:50 you can clearly see a long splined part on the side of the bowl ... look closely at the finish on the TOP end of the part ... same silver mat finish as everything else. Then at 16:30 you can see the SAME part (next to the big spring) with the precision slip fit finish where the paint was obviously removed. Don's really have an issue with him painting these parts but definitely not the the metal to metal contact areas ;)
Small and very complex.
you don't have to paint the internal mechanisms or the internal parts of the body. the paint will peel off and strain the movements. mask the holes and do not paint the gears.
Feliz año 😃😃😜
it's a great bike for you, because it rides alone, without a rider.
Love the channel I wanted to know whats that white chemical you use to make the bolts and gears look so good I need that
gam c To me it looks like he painted that stuff. Watch how he has to smash that shaft in that bearing. 🙄
It's fake. Metallic spray paint A 100 candy tone is very likely used: sonhoangminh.vn/upload/hinhthem/bm-xit-tv-2-5824.JPG
@@MeisterMotte seems like it I couldn't tell I have seen a chemical that nickel plates but you need acid and a buch of other steps thanks for the info
On 17:18, the place where he hits hummer, scratches like on the painted part, not like after acids from rust
It similar to hydro dipping
I would soooo have extra parts if I ever did anything like this...
BRILLANT
Such a tough machine for metal cutting that too usable only for rods..
Great job friend !!!!!
Fantastic work
Great work!
I like this job, even it doesn’t make a lot of sense.
Τέλεια η επισκευή της πρεσσας που κόβει σιδερα.
تسلم ايديك
Great job! Changing bearings and seal is the heart of any rebuild, and you got them all. One suggestion, don't get paint in any of the bearing mounting surfaces as in the yellow casting. Put a thin coat of grease on the area where the bearing seats, and it will wipe clean with a rag once painted. Don't put grease on the outer hace either; bearings are made for a metal to metal fit. Keep up the excellent work!
Neat movie! Special effects and everything.
am I the only one found it strange?
15:30 the solution looks a bit murkier than 15:45, which is more cleaner/whiter? and not a single sign of rust contaminated solution?
It's fake - he painted the parts with silver gray metallic paint but made it look like he dipped the parts in a "magic" solution. He didn't. ;)
I believe it is an acid, probably hydrochloric acid which dissolves the impurities and discolours the metal
That's right, he painted the parts with paint, which is very unintelligent since many are pieces that are going to be in constant friction
There sure are some idiots watching this video and commenting.
@@Claews Sorry to inform you that what you thought was a honest video, turned out to be just another bullshit performance. Unfortunately most people can't touch hydrochloric acid with their bare hands. And also didn't you find it a miracle that every part was the exact same color??? When soaking multiple metal parts in a tub of acid the end result will be that each of the parts will have slight variances in their color. Don't let the Asians lie to you!!! Remember they like to paint everything...lol😁😁😁
P.S. Koreans and Japanese excluded. They both have a very strong work ethic.
Porque não pintou depois de montar!!🇧🇷🇺🇸
How about a before and after picture?
Beautiful
Забивание молотком подшипника меня аж передергивает
Особенно, когда он делает это на тисках, в которых можно было просто запрессовать
Cái nước gì màu trắng vậy anh
cho em hỏi là máy đấy là máy gì vậy
Definitely an antique. Way too many parts just to do cutting action!
perfect work
Legal essa máquina de cortar ferro
good👍🏻👍🏻
You do great work but you need to mask off the inner portions of the machines before you paint them, the overspray can contaminate bearings and interfere with correct heights during assembly.
Clever intro. Better than the phony mail delivery box. The trick with the watered milk and painted parts - you waste milk! The paint will come of the metal parts where there is contact, mix with grease and gum up the works.
Happy New Year & Excellent From Mr. screw
WHICH VC USA PRODUCTS TO CLEAN SCREWS, WHICH IS GALVANIZED
Лайк за то, что хотя бы собрал)
Brilliant.
RESPECT VERY COOL WORK AMAZING
Trabalho perfeito parabéns.
Что за раствор в котором шестеренки отмачивал?
Молодец китаец, могёт.
Ok nice work on reassembly, but you took the antique out of it, it looks like a toy
Aesthetically pleasing, just not sure of the logic behind painting internal gears, bearing races and mating surfaces.
Cara,eu adoraria saber qual produto ele usa pra deixar as peças de molho,elas saem limpinhas
I love how this is one of the few people doing this without trying to make himself look like he is poor and living in a hut. Honesty is hard to find in these types of videos.
Bom trabalho na restauração do cortador de ferro, parabéns 👍
Bạn chỉ công thức mình oha dung dịch tẩy trắng sắt với ạ
Why are not change armecer and electric coils
how many hours did this actually take?
Nice job you did restoring that metal cutting machine. It looks much better and it works like a charm too. Great work.
what liquid it is (min.15.18) ?...
سبحان الله وبحمده سبحان الله العظيم اللهم صل على محمد واله وصحبه الكرام أستغفر الله وأتوب اليه
yout。 u.be。 /7QsKjAWSf5U。
多啦。
solid