Very good! A question! Is there the possibility of testing a Detector directly through the Central? In other words, enter the desired point and check its activation!
If you are referring to its values and whatnot to see if it's currently activated, then yes. You can not put the detector into alarm from the control panel itself, though. At least I don't think you can.. I'll check tomorrow
@@FireTech7 @FireTech7 In fact, I already did a test on the audio visual, however, activating a Detector through the Central I couldn't find any actual function! I've worked with other centers that had this option directly on the panel.
I like the setup. Are you gonna program the piezo to be disabled on the annunciators attached to the panel? Can the annunciator piezo be programmed to not sound?
I would just flip one of the dip switches on the back of it to the off position, I do that when the panel gets rebooted because during that time the acs bus shuts down and that acm goes into a com trouble and starts beeping. As for it being on the active system, I sort of like when multiple piezos go off at once, so I think I will keep it enabled.
Hi Sir, could you please any advise . In my alarm panel have one trouble : No power supply inst . power supply is ok, i made reset also, still showing this strouble.
Sir i am getting dual/double address error/alarm on my panel for some of the smoke detectors. I have tried to auto program but still issue exists please guide.
There are 2 annunciators programmed into the system that either donr exist or are disconnected from the panel, they can range from acm-24at to lcd-160, find them or delete them from the programming than reboot the panel
Done it 100's of times but still kept me entertained for five minutes lol
That's what I like to see lol
Very good!
A question! Is there the possibility of testing a Detector directly through the Central? In other words, enter the desired point and check its activation!
If you are referring to its values and whatnot to see if it's currently activated, then yes. You can not put the detector into alarm from the control panel itself, though. At least I don't think you can.. I'll check tomorrow
@@FireTech7 @FireTech7 In fact, I already did a test on the audio visual, however, activating a Detector through the Central I couldn't find any actual function!
I've worked with other centers that had this option directly on the panel.
@leninho10 Yeah, I know est and Silent Knight have those features, but I do not think notifier does
@@FireTech7 Thank you for the information!
Hi is it possible to disable NAC ? How is the method if can ?
Thanks for this. The building my on-site is in has this fire panel.
I like the setup. Are you gonna program the piezo to be disabled on the annunciators attached to the panel? Can the annunciator piezo be programmed to not sound?
I would just flip one of the dip switches on the back of it to the off position, I do that when the panel gets rebooted because during that time the acs bus shuts down and that acm goes into a com trouble and starts beeping. As for it being on the active system, I sort of like when multiple piezos go off at once, so I think I will keep it enabled.
Very interesting
Hi, how can you disable a range of devices at once? is it possible?
Sir detector alarm valve and pre alarm valve how to reset?
Hi Sir, could you please any advise . In my alarm panel have one trouble : No power supply inst . power supply is ok, i made reset also, still showing this strouble.
What's the slc address of the power supply
Very cool!!
Sir i am getting dual/double address error/alarm on my panel for some of the smoke detectors. I have tried to auto program but still issue exists please guide.
That means you have devices in the field that have the same address, you need to find those devices and change the address
Hi, how can you disable a range of devices at once?
Disable the zone or zones in which those devices are programmed to
Sir mere pass ye keyboard hia. Sale krne hai
And also getting the alarms for. ANNUN 1 NO ANSWER
ANNUN 2 NO ANSWER
Please guide
There are 2 annunciators programmed into the system that either donr exist or are disconnected from the panel, they can range from acm-24at to lcd-160, find them or delete them from the programming than reboot the panel
Super