Excellent work Mark, I’ve enjoyed the entire series. Currently building the Great Planes version and decided to check this out and learned a few tricks from you along the way. Much appreciated, take care.
Hello, I'm from Hokkaido, Japan You are sticking the film very well! Especially the three-dimensional curved surface of the wing tip is good! I am attaching a J-3 Cub film with a wingspan of 1600mm. Good luck with your production!😊
just wondering, could you do the shrinking with the iron itself or is the surface to small for that? just wondering because I haven't used the heat gun yet and it scares me..... one thing I did do is use the heat reacting glue on the access door edges so the film will stick better.. nice job thought!!
Loved it. I am currently building a Banana 2000 and I needed this video so bad ngl. But, how do you stick the wrap to the frame? What kind of glue do you use?
You cut the slots for the hinges before you cover the wing, right? So, after you cover the wing, whats your technique for finding where you cut the hinge slots. Do you just take a knife and cut through the covering where the slots are? I'm doing a kit for my first time and your help is much appreciated. thanks
Yes I cut the slots before covering. Once I have covered the wing, I use the aileron with the hinges in place to cut the covering on the wing to relocate the slots, I then cover the ailerons and use the hinges in the wing to relocate the slots in the ailerons. Good luck with the build
@@MarkRobinson555 Thats very clever. Thanks for that tip. I started my RC career with electric motors as prob most people do. I'd like to try glow or gas engines. What do you think the best way is to learn how they work. I don't really know anybody to show me what to do. Howd you learn what to do with those types of motors? Is glow much different than gas? Thanks Mark.
I also started with electric flying foam planes, but now love balsa and glow. Best thing you can do is find someone in a local club who flies glow if you can, and is willing to help, thats what I did. Also, you could get yourself a 40 trainer something nice and easy to fly so you can concentrate on the engine setup. Good luck, its a great way to go! 😀
Hi Ron, really pleased you find the videos helpful. I found MiniRC really good for balsa, and their mail order is excellent. I just sent them a message on Line to order there web address is minircflying.com
I have had balsa from ABC Flying, but I have found their service not quite as good, occasionally getting things wrong etc. I have also bought balsa from stationary shops, but quality is highly variable and you have to sort it and pick what you want.
Both the film and iron can be obtained from World Models, there is a link in the video description, alternatively this type of thing can be obtained from any model shop local to where you live
Loving the colours. The end of the build is drawing near.
Thank you very much, really appreciated. Yes nice a bright so I don't loose it!!
First rate covering skills! Nice work
Thank you very much, really appreciated
What a great looking plane Mark. Flies like a dream.
Thanks Norm, thanks for the comment, great flying it yesterday with you
Greetings from New Zealand
Awsum job......it sure doesn't look super easy 😎
Thanks for the comment, its not too bad a job, but the more you do it the easier it gets, thanks for the comment
Great video Mark, will love to se it in the air “flight of the falcon” Miss the 577/450 videos. Richard from Canada.
Thank you very much, really appreciated
Nice job Mark, I think it'll be visible in the sky is 🙂👏
Thank you very much, really appreciated. Yes nice a bright so I don't loose it!!
@@MarkRobinson555 I remember reading the two most prominent colours that out at a distance on a model plane is ... red and yellow 👏
Excellent work Mark, I’ve enjoyed the entire series. Currently building the Great Planes version and decided to check this out and learned a few tricks from you along the way. Much appreciated, take care.
Thank you very much for the kind comment, really appreciate you taking the time to comment. Hope your build goes well.
Beautiful work Mark, Cant wait to see it fly! 👍
Thank you very much, really appreciated
Good stuff Mark! Looks great.
Thank you very much, really appreciated.
Hello, I'm from Hokkaido, Japan
You are sticking the film very well!
Especially the three-dimensional curved surface of the wing tip is good!
I am attaching a J-3 Cub film with a wingspan of 1600mm.
Good luck with your production!😊
Thank you very much!
Lightex is my favourite covering. Steve Webb models doesn't carry much any more.
You can order directly from World Models, if you order enough it should outweigh the cost of shipping etc, just a thought
just wondering, could you do the shrinking with the iron itself or is the surface to small for that? just wondering because I haven't used the heat gun yet and it scares me..... one thing I did do is use the heat reacting glue on the access door edges so the film will stick better.. nice job thought!!
Yes, shrinking with an iron will be just fine. Practice on some scrap film just to make sure you have the right temp. Good luck
Loved it. I am currently building a Banana 2000 and I needed this video so bad ngl. But, how do you stick the wrap to the frame? What kind of glue do you use?
The film has a heat sensitive glue, so you use a hot iron to stick the film to the frame. Thanks for the comment, pleased you found it helpful
you should seal the covering joints as well so the nitro doesnt lift the covering off the wood mate
How do you seal your joints?
You cut the slots for the hinges before you cover the wing, right? So, after you cover the wing, whats your technique for finding where you cut the hinge slots. Do you just take a knife and cut through the covering where the slots are? I'm doing a kit for my first time and your help is much appreciated. thanks
Yes I cut the slots before covering. Once I have covered the wing, I use the aileron with the hinges in place to cut the covering on the wing to relocate the slots, I then cover the ailerons and use the hinges in the wing to relocate the slots in the ailerons. Good luck with the build
@@MarkRobinson555 Thats very clever. Thanks for that tip. I started my RC career with electric motors as prob most people do. I'd like to try glow or gas engines. What do you think the best way is to learn how they work. I don't really know anybody to show me what to do. Howd you learn what to do with those types of motors? Is glow much different than gas? Thanks Mark.
I also started with electric flying foam planes, but now love balsa and glow. Best thing you can do is find someone in a local club who flies glow if you can, and is willing to help, thats what I did. Also, you could get yourself a 40 trainer something nice and easy to fly so you can concentrate on the engine setup. Good luck, its a great way to go! 😀
what heat gun are you using?
Hi Mark, really helpful vids. where do you get wood from in Thailand? I have real problems sourcing decent quality here.
Hi Ron, really pleased you find the videos helpful. I found MiniRC really good for balsa, and their mail order is excellent. I just sent them a message on Line to order there web address is minircflying.com
Thanks Mark, I get quite a lot of stuff from Mini too but the balsa sizes are limiting.
I have had balsa from ABC Flying, but I have found their service not quite as good, occasionally getting things wrong etc. I have also bought balsa from stationary shops, but quality is highly variable and you have to sort it and pick what you want.
Che tipo di pistola usi ciao GRAZIE. OTTIMO LAVORO
Sorry, I can't remember the make, I don't have it any more. You just need a hot air gun from a DIY shop, used for paint stripping. Hope that helps
Where can I buy the plastic rolls and the iron looking thing
Both the film and iron can be obtained from World Models, there is a link in the video description, alternatively this type of thing can be obtained from any model shop local to where you live
How to get this sealing iron u used?
I bought it from my local hobby in Bangkok. Here is a link to a review I did of the iron, hope it helps - th-cam.com/video/DiZ-KOHycdo/w-d-xo.html
Needs work Mark,