Thanks Tom!! I spent the last few nights banging my head on the wall trying to set up a Timber that came without a receiver. Got it done today because of this video.
This is why I stay faithful to horizon hobby this is the easiest video to follow. Good job and keep on doing what you do. I will be installing this receiver in my 4fu 1.2 corsair.
Excellent ! Us old guys need all the help we can get when programming and your video helped tons! Thank you! ( Comment will come up Kathleen..it's actually Carl )
Very very helpful as a owner of multiple HH aircraft it's so nice to be able to have options for as3x reciever that's had a unfortunate mishap but I can continue using the item thanks love the content of this video
So just finally got my programming cable out of the packaging...and trying to figure out if there's even a way to setup flapperons - sure doesn't seem to be possible on the AR636B
The cable - SPMA3065 - www.horizonhobby.com/ar636-6-channel-as3x-sport-receiver--p-spmar636 Can this be purchases any longer? I realize this video isn't brand new, but still trying to figure out how I can have thousands of dollars worth of Horizon Hobby gear, and NO cable included in any of it?!?
I have been using open stock for a couple years along with several BNF Safe Select planes. Did my first model download. Used the Eflite Extra in an Extreme Flight 48” MXS. What a huge difference and pleasure it is to fly now.
Some things not discussed in video... how do I know that the upload of the model to the receiver has been successful? What is the difference between 'this device' and 'other device' on the models screen? I never get the 'Calibrate' question. After going through all of the steps in the video, then installing in the plane, doing a new bind. All of the AS3x functions seem to have been lost. There is no gyro correction and no SAFE functions, and yes, I did arm the ESC by running the motor.
For calibration, you will be prompted to do level calibration if upgrading from 1.xx. If you have newer firmware already installed in the receiver, it won't ask this.
You say that you can pick a model from the list to download to the receiver. What happens if you want to use the receiver in a model that's not on the list or scratch built?
How do we know whether the whole process is successful or not? How do we know the new settings are on the receiver or the old settings are still effective? Do I have to crash a few planes to find out?
All fine and thanks for the clear instruction. But what about the other software to download under the other button. "spectrum updater". What is that and when used? Thanks. Bob
When I connect my AR636 or AR8010T to the program it only allows me to access the "Software Update" portion and the other options like Dashboard, Model Settings and Initial Setup are all greyed out. They are only available to me when the receivers are NOT connected! Of course this doesn't make sense. Any tips?
Could this be used to set up AS3X and SAFE channels "from scratch" on a Spektrum receiver without a Spektrum radio? Also, are these combined into one "flight mode" channel?
Can confirm the part about reversing the servos. It's really hard to try and land in windy conditions while the AS3X is doing the opposite of what it should. I've done it xD
Please help--going crazy. I watched this video and programmed two AR636 with no problems at all. I then pulled another ar636 out of a viper and followed the video BUT when I download the model I want it does not show up in the program. I am connected to the receiver and click on models and my receiver is in the window but the model i download does not show up in the window. To really drive me nuts when I disconnect the receiver the models I download show up in the window. If I reconnect the receiver they disappear and only my receiver is there. I tried it on two computers and two receivers so maybe my cable is bad?? That is the only constant so I guess I'll try a new cable.
I've just purchased a 2nd hand E-flite P47 1.1m which has a spektrum AR636A receiver but I don't think it has SAFE installed, can I reprogram the receiver to have SAFE?
I bought a SPMAR630 DSM2/DSMX 6-Channel AS3X/SAFE Telemetry Receiver. It arrived with a programming cable but no USB connector. I did buy the SPMA3065 - TX/RX USB Programming Cable. Forward programming is available in my DX8e radio transmitter/receiver. I am having trouble understanding how to program SAFE Select ie: Beginner, Intermediate, Advanced modes. Where can I find specific instructions for MY receiver? Thanks in advance for any help you can provide.
Very nice video, thanks for posting. That said, quick question: I just bought a Draco 2.0 with AS3X and SAFE Select. Is there anything I need to do, other than bind it to my Radio (Radiomaster TX16s) if I JUST want to start flying!? It sounds like as if I only need this tool if I want to use the RX in another Plane, or if I want to change some settings in the RX. Correct? Thanks.
Thanks Tom. I have an AR636A and I followed your instructions. Everything was as you demonstrated but I couldn't find "calibrate". Any advice? Anyway truly a great instructional video.
Thanks for the very comprehensive article on this subject. It appears that at times in the video, the receiver was an AR636a and other times an AR636. Does it matter which one I have?
@@Lanzbik Hi, I have this receiver removed from crashed plane and would like to reprogram it so I can fit in other plane. Should I update with the new firmware, I heard if updated with stock 636 firmware it looses SAFE and AS3X capability? Is that still the case? Thank you.
I bought your F-15 BNF airplane, put it together and now i have a problem. If i turn on safe, the elevator is going to a slight down position. Is this right? I'm looking forward for my maiden flight and i have to handlaunch it. Will the plane fly itself into the ground or is this 1-2 mm elevator down setting how it should be to counterstear some lift that is generated otherwise? Thanks
I have problems with the configuration of the AR636B receiver when the plane is flying, it makes me suddenly tremble and it returns to normal and then after a while it gets shaky again and I don't know what to do or why it does that in As3x technology assisted flight mode
How can we setup AS3X Ar636 receiver from BNF model to another model?? I did the same settings which you said but only binds as normal receiver, no safe mode nor any gyro works?? Please help me out, I was using rarebear BNF receiver into multiplex funracer, thank you 🙏🏽
I bought a ar636 reciever, the model isn't listed so I tried removing bind plug before binding to my dx8 tx but no matter what I do i can't get safe only as3x. What am I doing wrong I thought the receivers already had safe built in when you buy them. Regards Tony from Australia
If I'm at the RC Field I fly at and cannot connect to the Internet on my laptop and logon to the account I've already created can I still use this to change some settings on my AR636A? Also, upon completion do we simply unplug the receiver from the cable and our changes we made, if any, are already applied?
I did the steps like you show us here but when I got to the calibration it didn't ask me to do so, the AR636 I'm trying to set up it's an AR636 that I got from the clip wing cub and I'm trying to put it on my F-27 evolution, I need your help!!!
Thanks for the tips and tricks. Any chance you have any tips for getting an AR8020T programmed? The programmer itself doesn't seem to give me much options once the device is connected and updated.
I have ar636a. I want to use on a custom plane I'm building. Is there any way I can turn it into an old school Spektrum receiver ware I can use it on any plane?
I replaced a servo and reversed my servo with the blue tooth program tool and my phone. I am flying the Aeroscout. I must have erased the receiver settings by a accident. I downloaded the Aeroscout file with my phone. I went through the motions and put the copy of the Aeroscout on the Ar636. Now the ASX gyro doesn't work. I can pick up the plane up and it has no movement in the surfaces. I'm stuck and don't know how to activate the gyro
I did this on my 1st gen Timber and things are working much better. However I can't get safe to turn off. I've tried binding it before and after unplugging the bind plug with no change. Any Ideas?
Great video. Please excuse my simple mind but does this mean that an AR636 AS3X receiver that I bought almost 2 years ago can be updated with firmware to become both AS3X and SAFE Select capable? Also, would the firmware update also make the receiver bluetooth capable?
If you bought it two years ago, the receiver hardware already supports SAFE. But the "stock" AR636s came with firmware 1.xx (AS3X-only). You simply need to flash it to firmware 2.xx to enable SAFE. The actual story is much longer than the above simple sentence. This section explains it: xinhaidude.com/2019/03/17/what-on-earth-is-safe-or-how-i-hacked-ar636-from-v900-to-fly-the-freewing-mirage-2000-with-safe-and-as3x/#open_stock_vs_safe_enabled.
When signing in to register my receiver (used). I get a message saying it is was already registered in the past so I’m unable to do anything:(. Now what?
hi:-) i just bought a new spektrum receiver AR636 and im on the process to program it...and i was wondering if the Night Radian NT model preset file could work on my new Night Radian 2.0....any idea/help? it would be very apreciate :-) thanks
Question I have the the same receiver that came in my Sukhoi 29mm and now i want to use in another model. and when i check for updates the program is not allowing me to. Wants me to register device and comes back as can't register. You must register device first and website not allowing me to register it as well. "Serial# not right for product" plane isn't in the list anymore. I cant even see profile in program to change settings? any ideas would be great And Thank You
How do I programm my Spektrum Dxe that came with my Mini Apprentice S RTF from Mode 2 to Mode 1? So that elevator and rudder are on the left stick and aileron and throttle are on the right stick. I already figured out how to do the stuff with the springs, but I don't now how to do the rest. Or do I have to reprogramm the receiver? Would be really happy about an answer
Wouldn't it be easier to learn to use it the way everyone in the new world use it...Mode 2, Throttle and Rudder on the left stick and ailerons and elevator on the right side... Learn it the right way unless you lives in Europe or China where they use it in Mode 1, (the way you wanted your radio to be)...Learn to use the the way it was meant to be use and you'll make your life easier!...👍🏾
@@ricardopr54 I've found out how to do it by now, I just swapped the channels from the receiver. And yes, I'm from Germany and everyone in my flight club flies with Mode 1 and I also found it way easier than Mode 2 in the RC lfight sim. But thanks for the answer!
@@carlibali Yes, in Europe, Mode 1 is what everyone uses, so I'm glad that you figured out how to fix your transmitter 😊... It's ironic that the person that posted this video didn't have the courtesy of answering your question nor the questions of many others🤦🏾♂️ That's so bad!... Anyway have a great day my friend! Greetings from Douglas, Arizona 👍🏾👍🏾👍🏾👍🏾🌵🦠😷🇵🇷
I have the cable etc and latest everything, I’ve got an old ar636 from my old viper I wish to put the carbon cub setup on. However when I try to import the new srm file it doesn’t show in the window. Then if I disconnect my rx it shows the new srm file but I can’t transfer it as I’ve turned the power off to the rx. Really confusing me
Question ? How can whipe out one model to install a new program ? I have a AR636B I followed this application but would it be nessery to delete one model before adding another in the receiver ?
Having trouble running Gear and SAFE select in an AR636A. Downloaded 1.2 P-51 Mustang which has retracts and flaps. Gear in ch 5 and flaps in ch 6. Do some 636A’s allow using ch 5 and others do not?
I have the PC program for the AR636 I have programed my F 16 64mm and it is currently in Safe mode continually and working, I cannot program a switch to turn it off. I have noticed in the program in the Port Assignment section that the Aileron, Elevator and Rudder is highlighted in the Safe section. Would this affect me not being able to set a switch to turn off Safe mode. Should I put them back into the Hold section, and try again, any help would be great..
I'm confused I bought the e-flite Cherokee bind and fly how do I get the safe mode on without all this haggle???? I'm not a computer programmer plz help
I was told by your product support department that An AR636B cannot be configured for SAFEselect with a configuration file that doesn't show SAFE at the end of the model description. Actually I was told no open stock AR636B receiver was capable of being programmed for SAFE at all. I believe that was incorrect advice after viewing this video! I have the Night Radian 2.0 FT that was purchased with SAFE but due to equipment damage I replaced the AR636 receiver with the AR636B since the straight AR636 is no longer available. Now I can't find the correct Night Radian configuration file on the Spektrum Website with SAFE. There's one in the large number of airplane configuration files but not with SAFE. How do I find the correct configuration file.
Does anyone know if the twin 64mm A10 AS3X/SAFE file can be used on the 70mm A10 version from FMS or Freewing? I have the AR636A and AR637TA receivers.
I have bound it in the Safe mode but it wont work, the as3x does do its thing but Safe is not working. I have a few Safe planes and they work fine, what could it be with my AR 636??
How can you program the as3x on other models not related to Eflite. For example I would like to install this reciever in a Great Planes Extra 300. Will I be able to program it to work properly.
What are we importing? New settings from the Spektrum website into Spektrum Programmer on new settings from the Spektrum Programmer into the receiver? You are not clear which of the two?
Thanks Tom!! I spent the last few nights banging my head on the wall trying to set up a Timber that came without a receiver. Got it done today because of this video.
It's about time Horizon and Spektrum has began to provided this kind of information. Kudos to Tom for an outstanding job.
This is why I stay faithful to horizon hobby this is the easiest video to follow. Good job and keep on doing what you do. I will be installing this receiver in my 4fu 1.2 corsair.
Excellent ! Us old guys need all the help we can get when programming and your video helped tons! Thank you! ( Comment will come up Kathleen..it's actually Carl )
Very very helpful as a owner of multiple HH aircraft it's so nice to be able to have options for as3x reciever that's had a unfortunate mishap but I can continue using the item thanks love the content of this video
Thank a million. Just what me a old timer technology challenged needed to program a new receiver . thanks again
So just finally got my programming cable out of the packaging...and trying to figure out if there's even a way to setup flapperons - sure doesn't seem to be possible on the AR636B
Hi did you ever manage to sort flaps out? Iv been using the receiver from the apprentice but wanted to get the ar636b I need to setup flaps though
The cable - SPMA3065 - www.horizonhobby.com/ar636-6-channel-as3x-sport-receiver--p-spmar636
Can this be purchases any longer? I realize this video isn't brand new, but still trying to figure out how I can have thousands of dollars worth of Horizon Hobby gear, and NO cable included in any of it?!?
I have been using open stock for a couple years along with several BNF Safe Select planes. Did my first model download. Used the Eflite Extra in an Extreme Flight 48” MXS. What a huge difference and pleasure it is to fly now.
Could you expand on how to use the AR636 in a model that may not be listed in the configuration files?
Thanks for the Helpful video on the AR636a receiver update
Some things not discussed in video... how do I know that the upload of the model to the receiver has been successful? What is the difference between 'this device' and 'other device' on the models screen? I never get the 'Calibrate' question. After going through all of the steps in the video, then installing in the plane, doing a new bind. All of the AS3x functions seem to have been lost. There is no gyro correction and no SAFE functions, and yes, I did arm the ESC by running the motor.
For calibration, you will be prompted to do level calibration if upgrading from 1.xx. If you have newer firmware already installed in the receiver, it won't ask this.
You say that you can pick a model from the list to download to the receiver. What happens if you want to use the receiver in a model that's not on the list or scratch built?
Thank you !!
Well done and much appreciated ..!
How do we know whether the whole process is successful or not? How do we know the new settings are on the receiver or the old settings are still effective? Do I have to crash a few planes to find out?
If the {Select} field is not present, that is the preset that is currently loaded.
"Download all as3x setups" is not on the Horizon page anymore. Where can I find the preprogrammed airplanes from?
All fine and thanks for the clear instruction. But what about the other software to download under the other button. "spectrum updater". What is that and when used? Thanks. Bob
Many thanks! (From a pilot who learned the hard way.)
When I connect my AR636 or AR8010T to the program it only allows me to access the "Software Update" portion and the other options like Dashboard, Model Settings and Initial Setup are all greyed out. They are only available to me when the receivers are NOT connected! Of course this doesn't make sense. Any tips?
I too have the same problem.
How do you set up the SAFE function on the Spektrum Programme if you're starting from scratch and SAFE has not been activated on the rx?
Is there a way to turn on AS3X if you are not using one of the provided profiles? ... like if I'm using the RX in an FMS jet model.
What if the plane you want to put the updated receiver in ISN'T a Eflight model? I have a Freewing F-22 I bought 2nd hand.
omg this is awsome. just wondering can i add the safe select into the AR636A from 1.2m t-28, p-51D Blondie or corsair that does not come with ss?
Could this be used to set up AS3X and SAFE channels "from scratch" on a Spektrum receiver without a Spektrum radio? Also, are these combined into one "flight mode" channel?
Best video yet on how to...I will be buying this receiver on my 1.2 4fu corsair
I just bought a used avios C-130 with this Rx in it..However I have a JR 11x Tx.. Is there a setup for non Spektrum transmitters...
Can confirm the part about reversing the servos. It's really hard to try and land in windy conditions while the AS3X is doing the opposite of what it should. I've done it xD
Bravo!
HI , thanks for intro, i just bought a Viper 70 from Horizon and I wonder if I can bind the AR636 to Radiomaster TX16s
Do ya'll have a video for how to setup safe select on a non-BNF/RTF model? I am not finding it? Thanks!
Please help--going crazy. I watched this video and programmed two AR636 with no problems at all.
I then pulled another ar636 out of a viper and followed the video BUT when I download the model I want it does not show up in the program. I am connected to the receiver and click on models and my receiver is in the window but the model i download does not show up in the window.
To really drive me nuts when I disconnect the receiver the models I download show up in the window.
If I reconnect the receiver they disappear and only my receiver is there.
I tried it on two computers and two receivers so maybe my cable is bad?? That is the only constant so I guess I'll try a new cable.
the same thing is happening to me. Did you ever figure it out?
How can you know if you need to reverse a control when it is not in the plane to see whick way they are moveing?
Tom, when I followed your steps, the programmer did NOT ask me to calibrate. Did I do something wrong?
How do you import a plane if it's NOT a Horizon Hobby plane? I have a Blitz RC works Sky Surfer I want to use the AR636 receiver in.
I've just purchased a 2nd hand E-flite P47 1.1m which has a spektrum AR636A receiver but I don't think it has SAFE installed, can I reprogram the receiver to have SAFE?
I bought a SPMAR630 DSM2/DSMX 6-Channel AS3X/SAFE Telemetry Receiver. It arrived with a programming cable but no USB connector. I did buy the SPMA3065 - TX/RX USB Programming Cable.
Forward programming is available in my DX8e radio transmitter/receiver.
I am having trouble understanding how to program SAFE Select ie: Beginner, Intermediate, Advanced modes. Where can I find specific instructions for MY receiver?
Thanks in advance for any help you can provide.
It would be great if you could make the font and pictures bigger, to see easier.
Very nice video, thanks for posting. That said, quick question: I just bought a Draco 2.0 with AS3X and SAFE Select. Is there anything I need to do, other than bind it to my Radio (Radiomaster TX16s) if I JUST want to start flying!? It sounds like as if I only need this tool if I want to use the RX in another Plane, or if I want to change some settings in the RX. Correct? Thanks.
I am putting this into a Dynam Albatros DVa and it is not on the list. Should I just pick an aircraft with a similar flight control surfaces?
So this is saying I can download the firmware to ADD SAFE to my AR636 receiver that didn't have it before?
thanks for tacking something so simple
and making it in possobul for sumone that dusint no computers
Does this mean I can apply SAFE technology to a normal AR636 or AR7350 receiver? I mean with self-leveling?
Thanks Tom. I have an AR636A and I followed your instructions. Everything was as you demonstrated but I couldn't find "calibrate". Any advice? Anyway truly a great instructional video.
Can I mount this receiver upside down. Im trying to put this receiver on the Conscendo Evolution?
Is the AR636H ok for a 450 size helicopter and up and programmable? Nothing to find on the google website whatsoever
Thank you this was exactly what I was looking for great video very easy to understand and very much appreciated 👍
I want to get ahold of that white glue y’all use to secure these receivers to the fuselage, where can I get that?
mrt1035 Yeah were do you get it???
@@mrt10352 It is just white Silicone or RTV. You can get it at Home Depot.
Thanks for the very comprehensive article on this subject. It appears that at times in the video, the receiver was an AR636a and other times an AR636. Does it matter which one I have?
Jerry Hill the only difference is the A model will need to be reprogrammed, as it programmed from the factory.
@@Lanzbik Hi, I have this receiver removed from crashed plane and would like to reprogram it so I can fit in other plane. Should I update with the new firmware, I heard if updated with stock 636 firmware it looses SAFE and AS3X capability? Is that still the case?
Thank you.
How about generic setups? “Low wing, receiver up, connectors forward”
I bought your F-15 BNF airplane, put it together and now i have a problem. If i turn on safe, the elevator is going to a slight down position. Is this right? I'm looking forward for my maiden flight and i have to handlaunch it. Will the plane fly itself into the ground or is this 1-2 mm elevator down setting how it should be to counterstear some lift that is generated otherwise? Thanks
I have problems with the configuration of the AR636B receiver when the plane is flying, it makes me suddenly tremble and it returns to normal and then after a while it gets shaky again and I don't know what to do or why it does that in As3x technology assisted flight mode
How can we setup AS3X Ar636 receiver from BNF model to another model?? I did the same settings which you said but only binds as normal receiver, no safe mode nor any gyro works?? Please help me out, I was using rarebear BNF receiver into multiplex funracer, thank you 🙏🏽
I bought a ar636 reciever, the model isn't listed so I tried removing bind plug before binding to my dx8 tx but no matter what I do i can't get safe only as3x. What am I doing wrong I thought the receivers already had safe built in when you buy them. Regards Tony from Australia
The eflite 64mm f-16 is not an option for download. Any reason why?
Can this same process work with an AR631 out of one eflite plane and upload another eflite plane profile ?/?? thanks in advance
If I'm at the RC Field I fly at and cannot connect to the Internet on my laptop and logon to the account I've already created can I still use this to change some settings on my AR636A? Also, upon completion do we simply unplug the receiver from the cable and our changes we made, if any, are already applied?
Yes indeed!
I did the steps like you show us here but when I got to the calibration it didn't ask me to do so, the AR636 I'm trying to set up it's an AR636 that I got from the clip wing cub and I'm trying to put it on my F-27 evolution, I need your help!!!
Hi. How do I set up a Ar636b to a ov-10 bronco. How do you set up Safe and AS3X on a plane that is not on the list in the spektrum programer
Thanks for the tips and tricks. Any chance you have any tips for getting an AR8020T programmed? The programmer itself doesn't seem to give me much options once the device is connected and updated.
Can AS3X be programmed directly from the ix12?
Sure can! Using the BT1000 bluetooth adapter it is very easy and wireless
Thank you for the video, however, what about if I don't buy a plane from Horizon?
I have ar636a. I want to use on a custom plane I'm building. Is there any way I can turn it into an old school Spektrum receiver ware I can use it on any plane?
I replaced a servo and reversed my servo with the blue tooth program tool and my phone. I am flying the Aeroscout. I must have erased the receiver settings by a accident. I downloaded the Aeroscout file with my phone. I went through the motions and put the copy of the Aeroscout on the Ar636. Now the ASX gyro doesn't work. I can pick up the plane up and it has no movement in the surfaces. I'm stuck and don't know how to activate the gyro
I did this on my 1st gen Timber and things are working much better. However I can't get safe to turn off. I've tried binding it before and after unplugging the bind plug with no change. Any Ideas?
Great video. Please excuse my simple mind but does this mean that an AR636 AS3X receiver that I bought almost 2 years ago can be updated with firmware to become both AS3X and SAFE Select capable? Also, would the firmware update also make the receiver bluetooth capable?
If you bought it two years ago, the receiver hardware already supports SAFE. But the "stock" AR636s came with firmware 1.xx (AS3X-only). You simply need to flash it to firmware 2.xx to enable SAFE. The actual story is much longer than the above simple sentence. This section explains it: xinhaidude.com/2019/03/17/what-on-earth-is-safe-or-how-i-hacked-ar636-from-v900-to-fly-the-freewing-mirage-2000-with-safe-and-as3x/#open_stock_vs_safe_enabled.
Thank Fred for the response. I did follow the link and it does a great job of explaining the differences and the setup as well.
Thats why I only buy the Spektrum and HR products. They explain it very well!
When signing in to register my receiver (used). I get a message saying it is was already registered in the past so I’m unable to do anything:(. Now what?
hi:-)
i just bought a new spektrum receiver AR636 and im on the process to program it...and i was wondering if the Night Radian NT model preset file could work on my new Night Radian 2.0....any idea/help? it would be very apreciate :-) thanks
What about doing this with a freewing f22 64mm pnp model?
Question I have the the same receiver that came in my Sukhoi 29mm and now i want to use in another model. and when i check for updates the program is not allowing me to. Wants me to register device and comes back as can't register. You must register device first and website not allowing me to register it as well. "Serial# not right for product" plane isn't in the list anymore. I cant even see profile in program to change settings? any ideas would be great And Thank You
How do I programm my Spektrum Dxe that came with my Mini Apprentice S RTF from Mode 2 to Mode 1? So that elevator and rudder are on the left stick and aileron and throttle are on the right stick. I already figured out how to do the stuff with the springs, but I don't now how to do the rest. Or do I have to reprogramm the receiver? Would be really happy about an answer
Wouldn't it be easier to learn to use it the way everyone in the new world use it...Mode 2, Throttle and Rudder on the left stick and ailerons and elevator on the right side... Learn it the right way unless you lives in Europe or China where they use it in Mode 1, (the way you wanted your radio to be)...Learn to use the the way it was meant to be use and you'll make your life easier!...👍🏾
@@ricardopr54 I've found out how to do it by now, I just swapped the channels from the receiver. And yes, I'm from Germany and everyone in my flight club flies with Mode 1 and I also found it way easier than Mode 2 in the RC lfight sim. But thanks for the answer!
@@carlibali Yes, in Europe, Mode 1 is what everyone uses, so I'm glad that you figured out how to fix your transmitter 😊... It's ironic that the person that posted this video didn't have the courtesy of answering your question nor the questions of many others🤦🏾♂️ That's so bad!...
Anyway have a great day my friend! Greetings from Douglas, Arizona 👍🏾👍🏾👍🏾👍🏾🌵🦠😷🇵🇷
I have the cable etc and latest everything, I’ve got an old ar636 from my old viper I wish to put the carbon cub setup on. However when I try to import the new srm file it doesn’t show in the window. Then if I disconnect my rx it shows the new srm file but I can’t transfer it as I’ve turned the power off to the rx. Really confusing me
Following the steps here when I hit power cable it goes back to the home screen ???
What do you do if you're looking to use the receiver for a plane not from HH?
Question ? How can whipe out one model to install a new program ? I have a AR636B
I followed this application but would it be nessery to delete one model before adding another in the receiver ?
I have AR636A from Blade fusion 270. Can I program it to fly Blade fusion 480 and still have SAFE?
Henry, unfortunately no. The Fusion 480 needs extensive programming that the AR636A won't be able to accomplish on its own.
Have this in the night radian will this unlock channels 4 5 &6?
Having trouble running Gear and SAFE select in an AR636A. Downloaded 1.2 P-51 Mustang which has retracts and flaps. Gear in ch 5 and flaps in ch 6. Do some 636A’s allow using ch 5 and others do not?
Hi.I have the ar636b from aeroscout 1.1 .will I be able to install it to a Turbo Timber having the SAFE functionality and flaps like the bnf model?
At Horizon Hobby its not possible to download any AS3X Setup for all airplanes. The link does not work🤷♂️
I have the PC program for the AR636 I have programed my F 16 64mm and it is currently in Safe mode continually and working, I cannot program a switch to turn it off. I have noticed in the program in the Port Assignment section that the Aileron, Elevator and Rudder is highlighted in the Safe section. Would this affect me not being able to set a switch to turn off Safe mode. Should I put them back into the Hold section, and try again, any help would be great..
So what do you do if the plane you are going to use it in is a different mfr or an unlisted plane?
How do you know that your surface are right if your not plugged in
I'm confused I bought the e-flite Cherokee bind and fly how do I get the safe mode on without all this haggle???? I'm not a computer programmer plz help
Thanks for the video, question can i use the AR636A in a FMS 6 channel warbirds? It’s the 1100mm Typhoon. Thanks
Imported model and I still cannot get Surface setup to work.
So they won they sell on the website is for the f16 636B so it can be programmed
Hi Tom, i use apple and I cant use the PC can I use the wireless cable instead?
Is it possible to do updates and AS3X modifications using a Spektrum bluetooth connector on the bind/batt on receiver and a iX12 AS3X app?
What is difference between AR636 , AR636A and AR636B ?
I was told by your product support department that An AR636B cannot be configured for SAFEselect with a configuration file that doesn't show SAFE at the end of the model description. Actually I was told no open stock AR636B receiver was capable of being programmed for SAFE at all. I believe that was incorrect advice after viewing this video!
I have the Night Radian 2.0 FT that was purchased with SAFE but due to equipment damage I replaced the AR636 receiver with the AR636B since the straight AR636 is no longer available. Now I can't find the correct Night Radian configuration file on the Spektrum Website with SAFE. There's one in the large number of airplane configuration files but not with SAFE. How do I find the correct configuration file.
So if you can do all this through a computer, what is the point of buying a fancy transmitter then? Thanks!
Does anyone know if the twin 64mm A10 AS3X/SAFE file can be used on the 70mm A10 version from FMS or Freewing? I have the AR636A and AR637TA receivers.
Great video but how do you reset from 3s battery to a 6s battery?
How do you get the "orientation" dialog to come up on the latest USB/PC programmer (3.4)?
I'm having the same issue; very frustrating...
Can you use SAFE for your custom build, or is it only meant to be used with a HH-compliant plane? Thank you for your time.
David, the AR637 has SAFE programming that can be used for almost any plane!
@@horizonhobby nice, I thought it was just programmable to have some specific settings for your planes. Thank you!
What do you do if the model you want to install it on is an obscure model not listed on the ap?
I have bound it in the Safe mode but it wont work, the as3x does do its thing but Safe is not working. I have a few Safe planes and they work fine, what could it be with my AR 636??
There are no helis on the zip downloaded files. Where are the heli setups? I don’t see any downloads on Horizon’s website for them.
How can you program the as3x on other models not related to Eflite. For example I would like to install this reciever in a Great Planes Extra 300. Will I be able to program it to work properly.
What are we importing? New settings from the Spektrum website into Spektrum Programmer on new settings from the Spektrum Programmer into the receiver? You are not clear which of the two?
The settings (model presets) come essentially "live" on the website. The program is the tool for getting those files to the receiver.