Installation of LED Headlight Assembly For Honda Gold Wing GL1800 2001-2018 Accessories

VEISUTOR LED Headlight Assembly Kit For GoldWing GL1800 01-18, LED Headlamp Front Lamp Replacement Set w/High Low Beam DRL Water Flowing Turn Signal Light For Honda Gold Wing GL1800 2001-2018 (2 PCS)

[@ronfriedman8740]

Great job!
There's a good reason mechanics charge so much for changing those air filters on the Honda Goldwing! 😉

[@charlesbaron7414]

Great video love the head lights. Should have change air filter just on GP

[@maverickb9465]

Most complicated installation.....rather save money and buy 2018+ if very keen on LED.......hats off to you

[@AnunakiAtlantis]

I prefer replace the bulbs with led light or Biled projector

[@kennethchristmas6390]

The sensor was mounted to the back of the left headlight. It shuts off bike if it falls over and I found after installing these lights, the bike will NOT start without that sensor.
Thanks

[@kennethchristmas6390]

HOW DID YOU MOUNT THE SENSOR from original lights to these lights?

[@CosmicTourist]

Which brand of LED bulbs do these use, and if required how difficult is it to change the LED bulb? Does it require the same disassembly as shown in the video?

[@veisutor4366]

Hello, this headlight is an assembly kit and the bulb cannot be removed separately. If there is a quality problem, you can contact our after-sales via Amazon. (You can refer to the installation steps in the video)

[@briancarlson1546]

So we loose the light tilt adjustment ? Are the lights pre lined up ? Thanks

[@jimmcgowin8780]

Yes you loose the tilt adjustment. DEAL BREAKER

[@dudleygordon5483]

You did a Great disservice,,,,,,,, all that work and you hardly show the new Headlights ,,,,,or the difference of the lights,,,,,
All you showed me is that it's alot of work
You should have been more,,,,,,,....complete

[@fooahhor826]

HOW MUCH

[@veisutor4366]

Hello, you can refer to the following link for the information you want to know
www.amazon.com/dp/B0BS6FRBPL

[@tbonesz1]

Ok what about bulb replacement what size does it take and you should have shown the final look with lights on

[@hadespaganism2405]

That's ridiculous to have to change the headlights to led !!! You have to disassemble the whole motorcycle. No thanks

[@owlexS]

Believe it or not, just to change the air filter, you have to remove 3/4 of what he did. (Unfriendly engineering)
So if you turn your own wrenches and change your own air filter, just do them together.

[@workharddieproud]

Thats to change out the entire headlight assembly, not to change stock bulbs to LED. Big difference.