THANKS ALOT KYLER!!!!! I was nervous about putting this on my 60D, but your steps help me out great! I look forward to seeing more tutorials from you. Now I just gotta get a faster card than this 16GB to record RAW
I have the 60d and at these settings Im getting a lot of dropped frames and it will stop recording, im about 99% sure its because my sd card can only handle 30mb/s. That is something people need to take into consideration...your sd card should be a high write speed card to get the best performance
I'm wanting to send my video signal to a Hyperdeck Shuttle and record my footage on there. Will the 60D send a 1080 signal? Or is the highest resolution 1728 X 972?
hey so my software on my 60d is 1.1.1 and everytime i restart my camera it says magic lantern is installed but when i go to video mode nothing has changed and its still the old way... i cant figure out what im doing wrong
I have followed the steps to download the magic lantern, but when I have turned my camera on after adding the file into the card, I don't have an option As your cameras shows. What have I done wrong?
Maybe this is a repeated question, however i wanted to know how many seconds can i record in Raw? Wich is the best SD memory for a large video? Thankss
I have a PNY 95mb/s card but I can only shoot continuously at 720p at most if I try to go 1080p it stops recording after 10-30sec depending on the scene.
Everything was going ok, until I realize my Canon 60D e the website of Canon updated the firmware to version 1.1.2, so is not 1.1.1 anymore.Oh well, what I do now? heeeelp please
@@JoeJoeRojo The option is there in the menu but with a different name... Google rec.mo last version and find out which one is the correct. But it is there
hello. I can setup my canon 60d for Raw Video, it's ok, but, when i rec my video only works 7 or 11 seconds. my SD Card is a class 10 Sandisk 45Mb/s. well, the camera not stop rec, but in the screen apears a message "Skeeping frames" what is wrong?
Hello, I have a question and I need your opinion. I have a 60d and a Sandisk Extreme Pro card of 32GB and 95MB/s. After watching your video, today I did some tests for raw video; I had no problems to create a raw video. However, with a resolution of 1728x972 (16: 9) I could not record more than seven seconds, showing the following message: "Early stop (11). Did not make it to Estimated record time!" That normal is this? Thanks in advance !!
TheBIOENTE Not sure is it true, I did go online research the facts that 60D only could shoot RAW between 5 sec to 7 sec. Could not proceed more than that. Not sure is is true.
So I did exactly what you did, but it still shows the stock Canon video platform. I hit the trash can but I can't seem to figure out how to switch over to the magic lantern platform. Is it required to use a 32GB or lower card? I'm using a PNY 64GB right now
May I ask? why u must edit the files first using Lightroom? why not just edit them directly using Premiere Pro (use adjusment layer) ? is there any difference? sorry if this is a stupid question. thx for ur attention
thanks for the tutorial... I'm having a problem however... every time i hit the record button it automatically shuts off and buffers. what am i doing wrong?
Before I decide to try this out, I have one question. Can I still shoot with the factory settings of 1920X1080 or will it always make me shoot raw? I'm seeing a lot of concerns about only recording a few seconds. I don't want to ruin my camera.
Okay cool. I guess it would just be something a little fun to mess with from time to time when you don't actually have to shoot something. I'll just save up for a black magic or something for real projects in the mean time. I was told that it could make your camera crash from time to time. Have you had this problem?
I recently had my Canon 60D service by Canon and it came back with new 1.1.2 software. I can't install ML build 1.1.1 for the 60D nor can I install Build 1.1.2 for the 70D. I am really missing my ML for so many things. Do you have any possible solutions??
Simply resin-stall 1.1.1 firmware then it will work - just did the update to 1.1.2 myself - then back to 1.1.1 when I realized magic Lantern required it - so I know it can be done. Search the web for 1.1.1 firmware it's still out there...
I have an old version of ML installed on my 60D. Should I remove it first, then download this nightly build? I've also been using a SanDisk 32g class 10 95mb/sec card. I imagine that's still sufficient to record raw?
That is sufficient enough to record raw, however, it will eventually stop because of the 60D's buffer speed. The 60D is unable to shoot continuous. Also I would recommend formatting your card and installing the latest nightly build to get the modules tab! -Kyler
Center Cut Studio That's due to the write speed of the Canon 60D. Unfortunately we are limited to 21 Mbps write speeds. However, I would try lowering your resolution and up-scaling it to 1080 just to get more time recording! -Ky
Depens on the resolution. I can get continuous recording (16 min 30 sec) until my 60D reaches 60° degrees so I stop recording (but it technically can continue). The resolution I use for this is slighty lower than 720p but this is presumably still better than 1080p in h.264 (still have to test). If you shoot 1080p RAW or close you will only get those 5 seconds.
not long ,and its due to the physical camera itself not the firmware. because the write speed on the camera itself tops off i believe 24mbs for shooting raw or higher quality the camera can not write
Hi great tutorial! I have one question though just to be sure: Is it ok to move the ML files via USB cable to the SD card in camera or does it has to be an external card reader (one that I don´t own at the moment) since that seems to be the case on every tutorial about this)? I´m guessing USB is ok, but haven´t seem a single tutorial that does the transfer that way.. scary shit :D Thanks!
I have some samples where it is. Commonly if you have 1 very saturated color and all other colors are below 1/3 of max. Typical for monochrom light situations, which you come across on live gigs.
Hey! Great job on this, my issue here, when i try to record it stop recording automatically everytime, What kinna card do you use?, i'm using a Sandisk 20MB/s' Class 6, could that be the problem, or please do help.. Thank you kyler
You can import as an image sequence in premiere as well. Start in premiere and select file>import. Then when it pops up the file explorer just locate the folder that has all the stills you want to import. You'll notice at the bottom of the file explorer a check box that says "Import as sequence" just select that and select the first image in the sequence then hit import and you're done.
The sad thing is that the Canon 60D is limited to a 21 Mbps write speed! However, I Would recommend a Class 10 SD card. I use a Sandisk ULTRA! Is there any particular tutorial you would like me to create? Thanks for the comment! -Ky
Kyler Holland Just a technicality but do you mean 21MB/s (MegaBYTEs)? 21Mbps (lower case b in here is for megaBITs) is actually 2.6 megabytes per second. There are 8 bits in a byte (21/8 is 2.6). Just thought I'd mention that as to not confuse anyone :) Cheers
Sorry man forget this crap, use what the pros have been using now for decades EXTERNAL RECORDING. Use the HDMI out and record that to a Ninja Blade SSD recorder ( 500 US) and record to an SSD in full ProRes or DNXHD. This is about a size of a deck of cards for 500 US ( without SSD as you must supply it). The Ninja Blade has turned my Canon 60D ( with Magic Lantern) into a full Blown Cinema Camera. You need to record your camera HDMI out and bypass the in camera compression. This is why the Pro's use external SSD recorders to shoot into editable INTRAFRAME ProRes 10 bit. I never thought I would be able to buy an External SSD HDMI recorder!!! but for 500 US this is cheap as 4 years ago this would be around 15,000 US. The Hollywood monopoly on external hardware is coming to an end.
What are you saying?! The 60D doesn't have a clear HDMI output so you can't record in fullHD via external recorder. I have a 60D and a atomos ninja 2 (which i use with a gh4, and btw with this camera is amazing) and they don't work well togheter.
I know nothing about atomos, but I was a network engineer, so my question comes from this perspective: Why won't atomos play well with the HDMI out? I've not looked into this at all, and if you have info that'd save me from chasing down a dead-end, I'd appreciate it. I need to go to a 240mpbs out camera for netflix req's anyway for Missing Over Tokyo, but I'm just curious about this issue. I looked into GH4/5 and they aren't on the Netflix approved list, sadly.
MissingOverTokyo Movie i don't know exactly how it works but i can tell you that the Canon 60D can't output a fullhd signal from is hdmi so if you connect the 60D to an external recorder (not only atomos but every external recorder) you can record a prores 422 file but not in 1920x1080
Hmm...I was a transport layer engineer at Microsoft in the past, and if you have data out, and USB 2.0 AND HDMI capacity, then one has to ask what the data paths inside the circuitry are, and if the card can't be bypassed and output directly to a USB or HDMI port, as both of those are substantially faster than the card. DSLR Controller doesn't do that, but it should. Hmmm....this is where I wish I was a EE, but....as a Product Manager, I could spec it out if there was any EE's game to re-code for Magic Lantern/DSLR Controller. Put those three together and WOW!!!
You should be able to, however, since the write speed is so low, It will most likely stop recording after a few seconds! I would recommend and extreme or ultra sd card. -Kyler
How did you manage to avoid the noise in the image, as I did tests with canon 60D RAW VIDEO and it generates a lot of noise in the image even though the ISO is 100 nothing else.
+Justyn Siah Magic lantern has a full website on how to handle it's files with your camera, it also has some very upfront warnings about how magic lantern could damage your camera. You should be researching this things before moving, deleting, or doing anything else with these files. Try using another SD, or even reinstalling Magic Lantern onto another SD card. I recommend using EOScard to install Magic Lantern, as it will take care of a lot of things for you. Good luck.
Brilliant. Love the Raw Graded result. Totally worth it.
i did the update and it says i am running ml now as my firmware, but nothing seems to have changed!
THANKS ALOT KYLER!!!!! I was nervous about putting this on my 60D, but your steps help me out great! I look forward to seeing more tutorials from you. Now I just gotta get a faster card than this 16GB to record RAW
Excellent tutorial Kyler.
Thanks a lot! Helped a problem I had
I have the 60d and at these settings Im getting a lot of dropped frames and it will stop recording, im about 99% sure its because my sd card can only handle 30mb/s. That is something people need to take into consideration...your sd card should be a high write speed card to get the best performance
why i did not find raw rec?
I'm wanting to send my video signal to a Hyperdeck Shuttle and record my footage on there. Will the 60D send a 1080 signal? Or is the highest resolution 1728 X 972?
hey so my software on my 60d is 1.1.1 and everytime i restart my camera it says magic lantern is installed but when i go to video mode nothing has changed and its still the old way... i cant figure out what im doing wrong
i take all of that back. i figure it out haha
Travis Lamb I'm having this problem. How did you resolve it?
you have to hit the trash button in video mode im pretty sure
press info button many times to see the UI
I have followed the steps to download the magic lantern, but when I have turned my camera on after adding the file into the card, I don't have an option As your cameras shows. What have I done wrong?
Maybe this is a repeated question, however i wanted to know how many seconds can i record in Raw? Wich is the best SD memory for a large video? Thankss
Does magic lantern makes the 60d to have auto focus in video mode ?
Alright it has a problem it stops in 10 sec Mark I have a 128gb Extreme 95mb speed SD card can anyone help me
in ma 60d such video settings on live view are not coming, what to do? video settings are are of canon nly when m in video shoot
Hey! Thanks for experimenting and putting all your findings in a convenient video. Really helpfull !
My 60D keeps stopping and switch to frame skipping then beeps - is that normal?? And the file made is .MLV instead of RAW.
I have a PNY 95mb/s card but I can only shoot continuously at 720p at most if I try to go 1080p it stops recording after 10-30sec depending on the scene.
Excellent, thanks!
Which which type of memory card did you use? My raw keeps stopping in 10 sec
class type 10 card or more is needed.
Everything was going ok, until I realize my Canon 60D e the website of Canon updated the firmware to version 1.1.2, so is not 1.1.1 anymore.Oh well, what I do now? heeeelp please
Is that possible after update firmware to magic lantern, i want to change back to old version?
Iv installed Magic Lantern on my 60D but can't find Raw_Rec.mo in Module section, why is this please?
happened to me as well
Me too. Any solution?
@@JoeJoeRojo The option is there in the menu but with a different name... Google rec.mo last version and find out which one is the correct. But it is there
why my canon 60d after 5 sec stopped recording?
what if magic lantern is installed on a 60D with version 112?
hello. I can setup my canon 60d for Raw Video, it's ok, but, when i rec my video only works 7 or 11 seconds. my SD Card is a class 10 Sandisk 45Mb/s. well, the camera not stop rec, but in the screen apears a message "Skeeping frames" what is wrong?
kturro chamorro www.magiclantern.fm/forum/index.php?topic=5653.0
Hello,
I have a question and I need your opinion.
I have a 60d and a Sandisk Extreme Pro card of 32GB and 95MB/s. After watching your video, today I did some tests for raw video; I had no problems to create a raw video. However, with a resolution of 1728x972 (16: 9) I could not record more than seven seconds, showing the following message:
"Early stop (11). Did not make it to Estimated record time!"
That normal is this?
Thanks in advance !!
TheBIOENTE Not sure is it true, I did go online research the facts that 60D only could shoot RAW between 5 sec to 7 sec. Could not proceed more than that. Not sure is is true.
So I did exactly what you did, but it still shows the stock Canon video platform. I hit the trash can but I can't seem to figure out how to switch over to the magic lantern platform. Is it required to use a 32GB or lower card? I'm using a PNY 64GB right now
+Doof3rproductions I have exactly the same problem. Also using a 64GB card now... What is the problem???
+Doof3rproductions press the info button until it comes up
May I ask? why u must edit the files first using Lightroom? why not just edit them directly using Premiere Pro (use adjusment layer) ? is there any difference? sorry if this is a stupid question. thx for ur attention
yes. Since these files are actually RAW pictures. Lightroom and Photoshop has the ability to read RAW files and allow for greater adjustments!
thanks for the tutorial... I'm having a problem however... every time i hit the record button it automatically shuts off and buffers. what am i doing wrong?
make sure your camera has 1.1.1. firmware before you install ML.
-Kyler
Amazing
Can I deinstall magic lantern after I worked with it? This is not my canon - it's borrowed from school.. so I'll have to give it back as it was ;)
Magoc lantern able 60d to 60 fps at 1080p?
thanks, your video so helpfull for me
Before I decide to try this out, I have one question. Can I still shoot with the factory settings of 1920X1080 or will it always make me shoot raw? I'm seeing a lot of concerns about only recording a few seconds. I don't want to ruin my camera.
yes. normal recording times are okay. you do only get a few seconds with raw.
Okay cool. I guess it would just be something a little fun to mess with from time to time when you don't actually have to shoot something. I'll just save up for a black magic or something for real projects in the mean time. I was told that it could make your camera crash from time to time. Have you had this problem?
I recently had my Canon 60D service by Canon and it came back with new 1.1.2 software. I can't install ML build 1.1.1 for the 60D nor can I install Build 1.1.2 for the 70D. I am really missing my ML for so many things. Do you have any possible solutions??
Simply resin-stall 1.1.1 firmware then it will work - just did the update to 1.1.2 myself - then back to 1.1.1 when I realized magic Lantern required it - so I know it can be done. Search the web for 1.1.1 firmware it's still out there...
Why does the card has to be less than 32gb?
Can I use a 64gb 30mb/s 200x Transcend Sd card?
+Peter Moua no, i have a 32gb 600x transcend and it sucks
Hey Kyler. I'm new to magic lantern. I have a 60D. Is it ok to just download the nightly build without having the 2.4 stable version first?
Yes! Go directly for the Nightly Build! It will be stable when you install it!
-Kyler
Thanks! Keep up the great work!
what kind of sd card do i need?
Will this still work in 2019/2020?
I have an old version of ML installed on my 60D. Should I remove it first, then download this nightly build? I've also been using a SanDisk 32g class 10 95mb/sec card. I imagine that's still sufficient to record raw?
That is sufficient enough to record raw, however, it will eventually stop because of the 60D's buffer speed. The 60D is unable to shoot continuous. Also I would recommend formatting your card and installing the latest nightly build to get the modules tab!
-Kyler
Kyler Holland Okay thanks. I'll give that a try.
Kyler Holland I actually got everything to work but I'm only able to record about 5 seconds until the camera automatically stops.
Center Cut Studio That's due to the write speed of the Canon 60D. Unfortunately we are limited to 21 Mbps write speeds. However, I would try lowering your resolution and up-scaling it to 1080 just to get more time recording!
-Ky
How long can a 60d record raw continuously with a good memory card?
NESFAN001 not that long. I've only been able to get about 5 seconds or so.
Depens on the resolution. I can get continuous recording (16 min 30 sec) until my 60D reaches 60° degrees so I stop recording (but it technically can continue). The resolution I use for this is slighty lower than 720p but this is presumably still better than 1080p in h.264 (still have to test). If you shoot 1080p RAW or close you will only get those 5 seconds.
not long ,and its due to the physical camera itself not the firmware. because the write speed on the camera itself tops off i believe 24mbs for shooting raw or higher quality the camera can not write
great video!
Sadly they are not doing ML for Canon 80D :-(
not yet! :D
Hi great tutorial! I have one question though just to be sure: Is it ok to move the ML files via USB cable to the SD card in camera or does it has to be an external card reader (one that I don´t own at the moment) since that seems to be the case on every tutorial about this)? I´m guessing USB is ok, but haven´t seem a single tutorial that does the transfer that way.. scary shit :D Thanks!
You should be fine. If anything goes wrong, just format your SD card! Try it out and let me know!
-Ky
If you use Lightroom to raw-edit you get the adobe color errors, which you can easily see in the first raws left lower corner.
Thorium Heavy Industries Actually, Lightroom is great at editing Raw images! The Adobe Color errors is not visible.
I have some samples where it is. Commonly if you have 1 very saturated color and all other colors are below 1/3 of max. Typical for monochrom light situations, which you come across on live gigs.
Thorium Heavy Industries I will look into that! Thanks!
Hey! Great job on this, my issue here, when i try to record it stop recording automatically everytime, What kinna card do you use?, i'm using a Sandisk 20MB/s' Class 6, could that be the problem, or please do help.. Thank you kyler
You need at least a class 10 or above!
-Kyler
Kyler Holland
Thanx
Also make sure the 10 class has a write speed of at least 45 or 60MB/s.
Hey! thank you
hey man i have lexar 10 , 60mb/s and it keep stopping
heey why raw record is automatically stopped after 5 sec?
probably that's how much data the camera buffer can handle. Make sure your card supports higher bit rate than what the camera is trying to write.
lumavisualexperience thanx
Oh! That dustbin button hahahahas TY!
Why don't you just import as an image sequence, that way you wouldn't need to Nest your images and it would be just one clip in the project.
JaredIshamTV You can do that with QuickTime Pro 7 I believe! I have before, just showing another way!
-Kyler
Cool.
You can import as an image sequence in premiere as well. Start in premiere and select file>import. Then when it pops up the file explorer just locate the folder that has all the stills you want to import. You'll notice at the bottom of the file explorer a check box that says "Import as sequence" just select that and select the first image in the sequence then hit import and you're done.
Oh! One more thing.... What is the fastest card would you recommend?
The sad thing is that the Canon 60D is limited to a 21 Mbps write speed! However, I Would recommend a Class 10 SD card. I use a Sandisk ULTRA! Is there any particular tutorial you would like me to create? Thanks for the comment!
-Ky
Kyler Holland Ok.... How much recording time do you get with your card shooting Raw?
probably around 8-12 seconds!
Kyler Holland Just a technicality but do you mean 21MB/s (MegaBYTEs)? 21Mbps (lower case b in here is for megaBITs) is actually 2.6 megabytes per second. There are 8 bits in a byte (21/8 is 2.6). Just thought I'd mention that as to not confuse anyone :) Cheers
Micah Wood Thank you for the clarification!
21 MB/s
i got no "raw_rec" module :(
damn, i got it. the name is just different - "mlv_rec.mo"
so i am thinking
D5300 or canon 60d?
+Walter Roman Pictures go with D5300, Video go with 60D, pictures and video 60D
please get me solution for it
i dont get the new live view ui on live mode :(
rest works fine
oh got it, just press info
this is not work in 60d
Sorry man forget this crap, use what the pros have been using now for decades EXTERNAL RECORDING. Use the HDMI out and record that to a Ninja Blade SSD recorder ( 500 US) and record to an SSD in full ProRes or DNXHD. This is about a size of a deck of cards for 500 US ( without SSD as you must supply it). The Ninja Blade has turned my Canon 60D ( with Magic Lantern) into a full Blown Cinema Camera. You need to record your camera HDMI out and bypass the in camera compression. This is why the Pro's use external SSD recorders to shoot into editable INTRAFRAME ProRes 10 bit. I never thought I would be able to buy an External SSD HDMI recorder!!! but for 500 US this is cheap as 4 years ago this would be around 15,000 US. The Hollywood monopoly on external hardware is coming to an end.
Links to suggested gear, please? Thanks!
What are you saying?! The 60D doesn't have a clear HDMI output so you can't record in fullHD via external recorder. I have a 60D and a atomos ninja 2 (which i use with a gh4, and btw with this camera is amazing) and they don't work well togheter.
I know nothing about atomos, but I was a network engineer, so my question comes from this perspective: Why won't atomos play well with the HDMI out? I've not looked into this at all, and if you have info that'd save me from chasing down a dead-end, I'd appreciate it. I need to go to a 240mpbs out camera for netflix req's anyway for Missing Over Tokyo, but I'm just curious about this issue. I looked into GH4/5 and they aren't on the Netflix approved list, sadly.
MissingOverTokyo Movie i don't know exactly how it works but i can tell you that the Canon 60D can't output a fullhd signal from is hdmi so if you connect the 60D to an external recorder (not only atomos but every external recorder) you can record a prores 422 file but not in 1920x1080
Hmm...I was a transport layer engineer at Microsoft in the past, and if you have data out, and USB 2.0 AND HDMI capacity, then one has to ask what the data paths inside the circuitry are, and if the card can't be bypassed and output directly to a USB or HDMI port, as both of those are substantially faster than the card. DSLR Controller doesn't do that, but it should. Hmmm....this is where I wish I was a EE, but....as a Product Manager, I could spec it out if there was any EE's game to re-code for Magic Lantern/DSLR Controller. Put those three together and WOW!!!
Great, very good. I have a question, I can record on a memory " 16 GB Class 10 30MB / S SDHC one ?
You should be able to, however, since the write speed is so low, It will most likely stop recording after a few seconds! I would recommend and extreme or ultra sd card.
-Kyler
thanks I will take into account, on Monday will conduct the tests, I'll see to do.
post results here if you can!
-Kyler
How did you manage to avoid the noise in the image, as I did tests with canon 60D RAW VIDEO and it generates a lot of noise in the image even though the ISO is 100 nothing else.
What are you doing tests of? If you mind. Could you send me a screenshot or something of your image?
great tutorial, but rendering settings (premiere pro) would be nice to see
It is just TH-cam HD 1080 30 FPS.
-Kyler
muchas Gracias...
da nada!
-Kyler
Kyler Holland realizo algo, y te lo muestro...
kkkkkkkkkkkkkkkkkkkkkk... joker
Hey, i have played around with the camera but when i deleted magic lantern of the usb and put it back in my 60d it doesnt turn on anymore
and when i press record it records for like 10 seconds and stops
+Justyn Siah Magic lantern has a full website on how to handle it's files with your camera, it also has some very upfront warnings about how magic lantern could damage your camera. You should be researching this things before moving, deleting, or doing anything else with these files. Try using another SD, or even reinstalling Magic Lantern onto another SD card. I recommend using EOScard to install Magic Lantern, as it will take care of a lot of things for you. Good luck.