The Auto clean function is activated by holding down the "Extra rinse" button for 5 seconds, whilst holding the button watch the display and you will see the words " Auto clean" scroll. Wait till it finishes scrolling and the machine will automatically lock and the display will now read the duration "1.10" once that all happens just leave alone till done. Remember 🎵🎶🎶🎵 "washing machines live longer with Calgon." 🎵🎵🎶🎵 (I did actually put mine in the drum.) Make sure it's empty tho when in auto clean mode.
Good video, just bought one of these this week, the first night, it ran all night, and was still going in the morning. When I eventually got it to stop and open the door, the clothes were still wet, tried to do a spin and drain at lunchtime yesterday, it was still going at 7pm last night. Wish I'd bought a reconditioned washing machine that is far easier to use and more economical. Considering sending it back. New technology on everything is far too complicated, for the most simplest of tasks. I chose this model for the colour, brand and price, wish I hadn't now. Had I watched this video prior to purchase, I definitely wouldn't have bought it.
Just got one of these and my wife swears she has been able to contact NASA using the keyboard and dials. Thanks for showing - you have made what was complicated initially - something we can now understand
I have a new Hotpoint NSWA 945C also 9KG. I just did a wash using liquid and after it finished the wash the liquid was still in the compartment. I used the blue plastic partition and the liquid was in the correct compartment.
I bought the 9kg model and there was no liquid level plastic part in my bag. Overall I m happy with the 45 min 9 kg was and the 20 degree full wash. I use Calgon in my machine every month and sometimes run a bottle of vinegar too as I live in a very hard water area. I like this machine.
Just watched this having had the machine for about 2 years. We solely relieved on the 2 quick washes all the time thinking it was convenient. Had no idea what invertamotor was and how the washing machine reads the load. I have notice using the smaller loads my waste pipe is getting very gunky and smelly. I will definitely be using the other cycles from now on 👍🏻
This machine is not bad but it seems to have a common problem with the following: during the cycle it will beep 3 times but for no apparent reason, no error warning and the cycle seems to go as planned but why is it beeping? After much research as Hotpoint don't offer much help it would appear that the Circuit Electric Board at the top/front is very sensitive, if there is any slight bit of dust, grease or dirt on it it will beep beep beep ... Very annoying indeed, but I have heard of this happens you have to take damp cloth and wipe thoroughly the front top panel and knobs and buttons. If it still goes Beep Beep Beep during the cycle press the Delay button and it will stop for the remainder of the cycle! It took me ages to find this out so in case any of you reading this experience this issue I hope this may help.
Thank you your video has helped me a lot.was a bit confused at first but after watching your video everything has been explained in an easy way.thank you again.
I have the active care version of this washing machine. I have had it for just over a year. Would never buy hotpoint again the clothes have never been so creased no matter what cycle that I use or how low the spin speed is. The seal was over lapping the drum when we first got it and would smell of burning after spins. Now it can sometimes get stuck on 1hr 12 on cycles and won’t progress any further so you have to manually rinse and spin. Hotpoint have said no faults with the machine. Previously had a Samsung which was so much better. Will be buying either a Samsung or LG in future. Hotpoint certainly aren’t the brand they used to be. Anyone who is considering hotpoint needs to really think twice.
Hope you enjoy using it. I had problems with my 9kg Hoover w.machine plus the engineers long waiting schedule repair for appoint dates. So I upgraded for 10kg on my current hotpoint model ..im happy with it.Had for 3 weeks ..
Thank you very much for your video I have found it useful I was very frustrated that I could not get the machine to wash any higher than 40 you have explained the programs perfectly
Excellent video.i have ordered one of this but in 8kg 1400spin.i was wondering does this type of washing machine have a front drain?And maybe you should have mentioned that this kind of washing machine has a inverter motor and not like the regular washing machines.👍👍👍👍
Good washer , the only problem iv found is if you do a 30min wash and over load the washer won’t complete the cycle..then you have to put it on and drain and spin or set on 45 to complete wash ..took me a little time to figure it out why wash wasn’t finish cycle 😮😮
Excellent video. Tone. Pace. Clarity; And very straight to the point. Especially that little blue things use at the end. Game changer for me. Cuz I was like 🫤🤪. Thanks mate!!
I have one I’ve only had it for 4 months and it’s leaking water all over my kitchen 😡 I’ve checked my plumbing and it’s fine so can’t work out where the water is coming from ? Can you advise ?
I have the 1600 spin version of this machine, the only problem I have found is that the fabric softener doesn’t seem to penetrate the clothes very well so the fragrance doesn’t seem to go on the clothes, softener goes in ok but doesn’t seem to leave the laundry smelling fresh. Any ideas??
I totally agree. What happens with mind is weird. First off i don't use fabric softener ever, I put Washing powder directly into the drum not the drawer. I make sure also I don't use too much but *sometimes (not always) when the cycle is finished and I open the drawer to air it out the blue fabric softener part has quite a bit of water in it's one time it was literally full of water, Why is this happening?? I know some water will he left just a trace of water but this is too much and I can't figure out why? Does anyone know 😢 So annoying
I bought this and I love it. However, I do have some clothes with designs on them and they need a cold wash. I noticed the cotton takes three hours. That is an insane amount of time, is there no way to bring down the length of time it washes?
Thanks for this video - really helpful as this washing machine was in the apartment I moved into however there was no manual for the machine so this was a great help however i was waiting also for you to show us how to clean the filter- i know it is at the bottom of the machine but how do i open the cover? thanks
Got a similar model and feel I've learnt a lot from this. Not one for reading manuals. Usually just left it on 'mix', which takes ages! I get the Dr. Beckman cleaner and check the filter now and then. Those mystery buttons are revealed. Thanks. Happy New Year.
@@SAVOURYONE Me too. But I started my flat with a new way of sorting my head out. So kept files! Yeah...That went well enough so now I can't find anything! ;p
Normally select a high temperature for the cleaning cycle like a 60 or 90 degree wash. We normally recommend sticking to a main brand of detergent rather than some of the cheaper supermarket brands as it can make a difference.
If you are after the full 1400 spin then i would stick with the Cotton programs as you should be able to select the full spin to extract as much water as possible. Also make sure that it is a decent load in the machine. If your load is too small then it may not balance properly so it will not spin at the full spin speed.
Hi I have Ariston Washing Machine 7kgs that is stopping during wash at 28 mins ,counts till 25 mins washes till 19mins stops again timer goes to 15mins, continues to wash till 0,then adds time to 15 mins... What might be the problem?
It could be that the program you are washing on has a small load capacity? It is standard to add time to a wash if you are putting in a larger load than is set on the machine for the program you are selecting.
If you use lower temperatures like 20 or 30 degree then i would recommend once a month, or if you use higher temperatures like 60 or 90 degree programs then every couple of months should be ok.
Hi my hotpoint machine did not water supply I used only 2 month I Set the time but my little kid touch the buttons after that water supply did not work kindly guide me .what I do
I have a hotpoint too. Honestly it's very easy but you have to prepare. The one big thing I hate is I cannot get a tray shallow enough to fit under the machine to catch the water once the filter door has been opened, so I rely on old towels to soak up the water. So what you do is open and remove the panel at the very bottom of the machine it will come off, slowly turn the round shape knob anti clockwise and you will see water spill out, once the water has stopped you get an old rag and wipe just inside the area and make sure you can gently turn the fan manually inside. Oh and make sure the power to the machine has been turned off !
Hi, I bought one of these machines recently. I want to decrease the time on a 60 degree cycle as don’t want the wash to be over 3 hours long. The shop told me to press the extra touch button and this would bring down the time, but when I press this it just keeps bleeping. Can you offer any advice? Thx in advance.
Hi I have a NSWM1045CGGUKN 10KG model for 3-4 weeks .Does the washing machine clean it self .I can't find my manual. .much appreciated.I am happy with it. Thank you 😊
I assume you mean the softener section in the soap drawer? Softener is used to reduce wrinkles, prevent static build-up, make your clothes feel softer, and leave them smelling fresh.
15:03 the bottom right of my tray is the same it looks like the plastic has chipped is this a design fault or is it supposed to be like that. I was worried at first thinking it snapped off and went inside my machine but yours is the same.
Hi there I put 3 pillow in wash machine hotpoint 9k but the end cycle become more slow and not drain properly Could you direct me please what should I do? Thanks
Sounds like the machine may not be able to balance the load out properly if you have the Pillows in the machine. If you put some other items like towels in too then it may balance the load a bit better
From the compartment can you please explain which one to put the soap powder in? Is it the large compartment or the middle one? I feel like I'm doing it wrong and it's not cleaning to its full potential
The large one on the right, the left one with the removable insert is for fabric conditioner, the middle one serves no purpose so don't put anything in it.
Just watched your video and it’s very informative, we have just purchased the 9kg model and have noticed a couple of odd things. On the 46 min full load cycle the machine will just sit doing nothing with a drum full of water (timer counting down) Also the fabric conditioner doesn’t seem to be empty after the cycle.. can you shed any light on this?
Does sound odd, i assume towards the end of the program the water will empty from the machine? sometimes the water will stay within the machine to try and soak the clothes. Sometimes if the water pressure is too low or the tap is not turned on enough, it can struggle to take all the conditioner away as well.
The main thing you can do is to use a flat headed screwdriver to gently prize off the plastic trim on the front of the washer. that way you have access to the pump filter
If this is a new washing machine then make sure the transit bolts have been removed. If they have then it sounds like it could be the bearings that could have gone
Hi. I just purchased this model last week. My question is when I put wash on and the spin cycle happens. The machine physically moves all over my kitchen and by doing this it broke my plug socket. How do i keep it grounded so it doesn't move. I've just had a new kitchen fitted too. Please help. Thanks regards yas
This does sound odd and i would check to see if the transit bolts have been removed from the back of the machine. The main reason a machine will move is if the transit bolts have been left in which will damage the machine and will not be covered under the warranty.
You can't normally unlock it mid cycle as it will have water in the drum and it will need to be emptied first. You will need to cancel the program and drain the water before selecting a new program.
@@lords-electrical this seems unusual. I've had machines before where you pause the cycle and the door unlocks after a few minutes where you can either remove an item or add one. What happens if a phone is in a pocket? You wouldnt be able to get it out and essentially would have to run the programme or take the machine apart. This seems like a design oversight from Hotpoint
I purchased a used washing machine model hotpoint 7kg, I noticed 2 things missing the level liquid measuring and the cold water hose at the top left hand corner
First of all is there power to the machine? if there are no lights on at all then it could be a faulty socket or a blown fuse. After that i would see if Hotpoint are willing to help out if its still under a warranty.
There is power to the machine and lights come out .But when you start a cycle it cuts out and locks the door .it actually started by making a loud noise during the spin cycle ,after that is stopped mid cycle .
Good morning! I bought this washing machine and l washed 1 cicle without taking of the transportation screws. At one point it stopped working and it doesn t switch it on at all. Do you think it can be recovered ? Thank you!
If a machine hasn't got a dedicated self clean program then i would normally recommend just selecting a Cotton program, putting it on a 90 degree wash with no items of clothing in there. That way it will put the machine through a high temperature program to clean the machine
That sounds odd, i am not sure what it could be, if its still under the 1 year warranty, i would give Hotpoint a ring to see if they can call out to check it over for you.
Good video , but I’ve just bought one and the drum ticks when it spins , and when you hand turn the drum it ticks and goes really stiff … anyone know if it’s normal, thanks
I would keep an eye on it but it could just be the motor brushes bedding in. If it is still the same after around 10 washes, i would contact Hotpoint to get them to have a look at the machine
I got this machine and after 5 weeks, it make a horrible burning rubber smell. Hotpoint fobbed me off and said it is the drum rubbing against the rubber. It might do that time to time..... 🤨🤨
Couple of reasons for this. First of all make sure the water pressure is enough to take the powder through the machine. If its too low then there may be residue left at the end. Also you may be overdosing, so may be worth reducing the amount of powder you put in the machine, as modern machines don't need as much detergent as older machines used to.
the machine is great but finding that when i use fabric conditioner it smells great when washing done but when it dries on the line smells not so nice why and has musty smell when it dry, it is not the washingg machine and not overfilling the fabric condtioner tray any ideas... it really is driving me mad
I've just had a look and it indicates the the upper control board is not communicating with the main control board. It may just be a case that a connection or wire has come loose for some reason.
Hi, could you perhaps tell me the most energy efficient wash as the manual for the hotpoint nswm944cbsukn washing machine doesn't show energy consumption for all cycles listed. This would be a great help thanks!
Assuming your machine has it, then the Eco 40-60 is normally the most efficient wash. It will take a long time to wash but it is an efficient way of washing.
Not too sure, but sometimes it can be that there is an issue with the water supply or it could be the waste outlet that may be blocked if it is struggling to pump water out
The Auto clean function is activated by holding down the "Extra rinse" button for 5 seconds, whilst holding the button watch the display and you will see the words " Auto clean" scroll. Wait till it finishes scrolling and the machine will automatically lock and the display will now read the duration "1.10" once that all happens just leave alone till done. Remember 🎵🎶🎶🎵 "washing machines live longer with Calgon." 🎵🎵🎶🎵
(I did actually put mine in the drum.) Make sure it's empty tho when in auto clean mode.
And where's the 'Extra Rinse' button?
thank you
Good video, just bought one of these this week, the first night, it ran all night, and was still going in the morning. When I eventually got it to stop and open the door, the clothes were still wet, tried to do a spin and drain at lunchtime yesterday, it was still going at 7pm last night. Wish I'd bought a reconditioned washing machine that is far easier to use and more economical. Considering sending it back. New technology on everything is far too complicated, for the most simplest of tasks. I chose this model for the colour, brand and price, wish I hadn't now. Had I watched this video prior to purchase, I definitely wouldn't have bought it.
Just got one of these and my wife swears she has been able to contact NASA using the keyboard and dials. Thanks for showing - you have made what was complicated initially - something we can now understand
Great to hear. Thanks for the feedback
I have a new Hotpoint NSWA 945C also 9KG. I just did a wash using liquid and after it finished the wash the liquid was still in the compartment. I used the blue plastic partition and the liquid was in the correct compartment.
I bought the 9kg model and there was no liquid level plastic part in my bag. Overall I m happy with the 45 min 9 kg was and the 20 degree full wash. I use Calgon in my machine every month and sometimes run a bottle of vinegar too as I live in a very hard water area. I like this machine.
The liquid level isn't in the bag , it's in the draw in a little slot on the left to take out next to the conditioner trap
I dobt have the liquid level either
Just watched this having had the machine for about 2 years. We solely relieved on the 2 quick washes all the time thinking it was convenient. Had no idea what invertamotor was and how the washing machine reads the load. I have notice using the smaller loads my waste pipe is getting very gunky and smelly. I will definitely be using the other cycles from now on 👍🏻
That's great, thanks for the feedback
Excellent video, many thanks for all your hard work with these videos!
Enjoyed watching this, it answered all my questions with great instructions on how to get the best out of my new hotpoint, thank you
This machine is not bad but it seems to have a common problem with the following: during the cycle it will beep 3 times but for no apparent reason, no error warning and the cycle seems to go as planned but why is it beeping? After much research as Hotpoint don't offer much help it would appear that the Circuit Electric Board at the top/front is very sensitive, if there is any slight bit of dust, grease or dirt on it it will beep beep beep ... Very annoying indeed, but I have heard of this happens you have to take damp cloth and wipe thoroughly the front top panel and knobs and buttons. If it still goes Beep Beep Beep during the cycle press the Delay button and it will stop for the remainder of the cycle! It took me ages to find this out so in case any of you reading this experience this issue I hope this may help.
Thank you so much mine is doing this and it’s driving me crazy😂I’ll give it a go!🙏🏻
Thank you your video has helped me a lot.was a bit confused at first but after watching your video everything has been explained in an easy way.thank you again.
Thank you so much! I got what I was looking for within the first two minutes.
I have the active care version of this washing machine. I have had it for just over a year. Would never buy hotpoint again the clothes have never been so creased no matter what cycle that I use or how low the spin speed is.
The seal was over lapping the drum when we first got it and would smell of burning after spins. Now it can sometimes get stuck on 1hr 12 on cycles and won’t progress any further so you have to manually rinse and spin. Hotpoint have said no faults with the machine.
Previously had a Samsung which was so much better. Will be buying either a Samsung or LG in future. Hotpoint certainly aren’t the brand they used to be.
Anyone who is considering hotpoint needs to really think twice.
My new one arrived yesterday without instructions. Glad I found your easy useful demonstration. Thank you.
No problem, glad it was helpful for you, thanks for the feedback
Hope you enjoy using it. I had problems with my 9kg Hoover w.machine plus the engineers long waiting schedule repair for appoint dates. So I upgraded for 10kg on my current hotpoint model ..im happy with it.Had for 3 weeks ..
excellent machine so far.. had a top of the range samsung and it lasted 2 years. hope this one fares better
I like the older version to this washing machine because it’s got easy iron on it
Thank you very much for your video I have found it useful I was very frustrated that I could not get the machine to wash any higher than 40 you have explained the programs perfectly
Absolutely. Please do another and thank you
Excellent video.i have ordered one of this but in 8kg 1400spin.i was wondering does this type of washing machine have a front drain?And maybe you should have mentioned that this kind of washing machine has a inverter motor and not like the regular washing machines.👍👍👍👍
I hate mine, it's so noisy when spinning and need to spin twice and yes it is balanced.
Good washer , the only problem iv found is if you do a 30min wash and over load the washer won’t complete the cycle..then you have to put it on and drain and spin or set on 45 to complete wash ..took me a little time to figure it out why wash wasn’t finish cycle 😮😮
Excellent video. Tone. Pace. Clarity; And very straight to the point. Especially that little blue things use at the end. Game changer for me. Cuz I was like 🫤🤪. Thanks mate!!
I have one I’ve only had it for 4 months and it’s leaking water all over my kitchen 😡 I’ve checked my plumbing and it’s fine so can’t work out where the water is coming from ? Can you advise ?
I have the 1600 spin version of this machine, the only problem I have found is that the fabric softener doesn’t seem to penetrate the clothes very well so the fragrance doesn’t seem to go on the clothes, softener goes in ok but doesn’t seem to leave the laundry smelling fresh. Any ideas??
Hi please can you tell why there is always water left in the fabric conditioner compartment at the end of a wash circle?
Normally what most machines will do is to flush the soap drawer compartments out with a small amount of water at the end of the program.
I totally agree. What happens with mind is weird. First off i don't use fabric softener ever, I put Washing powder directly into the drum not the drawer. I make sure also I don't use too much but *sometimes (not always) when the cycle is finished and I open the drawer to air it out the blue fabric softener part has quite a bit of water in it's one time it was literally full of water, Why is this happening?? I know some water will he left just a trace of water but this is too much and I can't figure out why? Does anyone know 😢 So annoying
Have I missed something or did he omit the "mixed" cycle. My favourite one.
He did miss that out.
Where do you put the soap in? There are three compartments.
I bought this and I love it. However, I do have some clothes with designs on them and they need a cold wash. I noticed the cotton takes three hours. That is an insane amount of time, is there no way to bring down the length of time it washes?
Thanks for this video - really helpful as this washing machine was in the apartment I moved into however there was no manual for the machine so this was a great help however i was waiting also for you to show us how to clean the filter- i know it is at the bottom of the machine but how do i open the cover? thanks
You need to use a flat headed screwdriver to gently remove the cover off the front without scratching it
Thank you this video was very helpful😊 where is the water filter on this machine?
The access to the pump will normally be at the bottom of the front of the machine under the plastic trim
@@lords-electrical thank you so much!
I love the color of this one 😍
Thanks for clarifying what the baby cycle meant. Phew!
Got a similar model and feel I've learnt a lot from this. Not one for reading manuals. Usually just left it on 'mix', which takes ages! I get the Dr. Beckman cleaner and check the filter now and then. Those mystery buttons are revealed. Thanks. Happy New Year.
I'm not really one for manuals but I would persist with if I needed too. I did have one but find it lol
@@SAVOURYONE Me too. But I started my flat with a new way of sorting my head out. So kept files! Yeah...That went well enough so now I can't find anything! ;p
Very well explained video. Could you include instructions on first time use - which cycle to use?
Thank you
The video is great and very helpful which cleaning cycle and detergent would you suggest please
Normally select a high temperature for the cleaning cycle like a 60 or 90 degree wash. We normally recommend sticking to a main brand of detergent rather than some of the cheaper supermarket brands as it can make a difference.
Hey great video & wish the soap drawer compartments were explained. Thanks you for posting
Great video. One question. Does the fabric softner liquid go into the grey section of the drawer? On the left-hand-side?
Thank you very much. Very informative! Much appreciated!
How do you use the steam setting 🤔
excellent, everything was covered nicely, thank you
Great to hear. Thanks for the feedback
Mum's machine is finishing a wash and clothes still soaking wet. What wash cycle does a full spin?
If you are after the full 1400 spin then i would stick with the Cotton programs as you should be able to select the full spin to extract as much water as possible. Also make sure that it is a decent load in the machine. If your load is too small then it may not balance properly so it will not spin at the full spin speed.
That liquid soap draw thing is stored in the side of the draw when not in use and you didn't show the auto clean cycle
Hi
I have Ariston Washing Machine 7kgs that is stopping during wash at 28 mins ,counts till 25 mins washes till 19mins stops again timer goes to 15mins, continues to wash till 0,then adds time to 15 mins...
What might be the problem?
It could be that the program you are washing on has a small load capacity? It is standard to add time to a wash if you are putting in a larger load than is set on the machine for the program you are selecting.
This machine that doesn't have a drum clean how often you clean the drum ?
If you use lower temperatures like 20 or 30 degree then i would recommend once a month, or if you use higher temperatures like 60 or 90 degree programs then every couple of months should be ok.
Press and hold down the extra rinse button and that will start the clean cycle, use a little bit of washing machine cleaner in the detergent drawer.
Probably a weird question but can you do a service wash or boil wash program on this machine?
Well, I should've watched all the way through properly - the Whites program goes up to 90°C!
Hi my hotpoint machine did not water supply I used only 2 month I Set the time but my little kid touch the buttons after that water supply did not work kindly guide me .what I do
I've got the same model it would be nice if you could do a video on how to clean the filter at the bottom of the machine
I have a hotpoint too. Honestly it's very easy but you have to prepare. The one big thing I hate is I cannot get a tray shallow enough to fit under the machine to catch the water once the filter door has been opened, so I rely on old towels to soak up the water. So what you do is open and remove the panel at the very bottom of the machine it will come off, slowly turn the round shape knob anti clockwise and you will see water spill out, once the water has stopped you get an old rag and wipe just inside the area and make sure you can gently turn the fan manually inside. Oh and make sure the power to the machine has been turned off !
@@siobhanrose9515
Thank you the filter came out really easy thanks for the advice 🙂
Hi, I bought one of these machines recently. I want to decrease the time on a 60 degree cycle as don’t want the wash to be over 3 hours long. The shop told me to press the extra touch button and this would bring down the time, but when I press this it just keeps bleeping. Can you offer any advice? Thx in advance.
Probably the programme you are using doesn't allow the time saving option, not all of them do. You will need to try other programmes.
Hi. Great video, any reason why all of a sudden my times are WAY off what they should be????? TIA
The only reason normally is that the machine is being overloaded on the program that is meant for a small capacity load
Hi I have a NSWM1045CGGUKN 10KG model for 3-4 weeks .Does the washing machine clean it self .I can't find my manual. .much appreciated.I am happy with it. Thank you 😊
It doesn't normally clean itself but you will normally select a high temperature wash on its own with nothing in it to clean the machine.
Hi again. I've been told there's a filter that I can empty down the the brown panel .How would I take it off ?
I've also been told I press the auto rinse
@SAVOURYONE normally if you get a screwdriver and just prize it off from the middle then the sides it should come off OK.
@@lords-electrical . I never thought of using this tool
Thank you again👏🏼👍👍
Can someone please explain how or what settinf the steam hygiene works thanks
Thanks for the video. I got my machine today are you able to explain more about the liquid thing, please?
I assume you mean the softener section in the soap drawer? Softener is used to reduce wrinkles, prevent static build-up, make your clothes feel softer, and leave them smelling fresh.
@@lords-electrical I use laundry liquid. You mentioned in the video about the liquid coming out quickly
There are three slots in the draw there is always a third one what are they for ?
Main wash, pre wash and fabric conditioner
Middle slot has no purpose, for goodness sake don't put anything in it!
@@lords-electrical No, no pre wash compartment with this machine
15:03 the bottom right of my tray is the same it looks like the plastic has chipped is this a design fault or is it supposed to be like that. I was worried at first thinking it snapped off and went inside my machine but yours is the same.
I use to do 40°, spin 1200 use to take 41 minutes. Is there a standard wash with 40° that doesn't take 3 hours
Most of the Hotpoint machines have a full load program that should enable you to do a full wash in around 45 - 60 minutes.
Hi there I put 3 pillow in wash machine hotpoint 9k but the end cycle become more slow and not drain properly
Could you direct me please what should I do?
Thanks
Sounds like the machine may not be able to balance the load out properly if you have the Pillows in the machine.
If you put some other items like towels in too then it may balance the load a bit better
@@lords-electrical thank you so much mr
From the compartment can you please explain which one to put the soap powder in? Is it the large compartment or the middle one? I feel like I'm doing it wrong and it's not cleaning to its full potential
The large one on the right, the left one with the removable insert is for fabric conditioner, the middle one serves no purpose so don't put anything in it.
Which is the pre wash soap and main wash soap compartment is. Please
No pre wash, main soap is on the right.
Beeping constantly during the cycle...any tips on how to fix that?
Please can you tell me what buttons do you press to get the clean program going
Just watched your video and it’s very informative, we have just purchased the 9kg model and have noticed a couple of odd things.
On the 46 min full load cycle the machine will just sit doing nothing with a drum full of water (timer counting down)
Also the fabric conditioner doesn’t seem to be empty after the cycle.. can you shed any light on this?
Does sound odd, i assume towards the end of the program the water will empty from the machine? sometimes the water will stay within the machine to try and soak the clothes. Sometimes if the water pressure is too low or the tap is not turned on enough, it can struggle to take all the conditioner away as well.
@@lords-electrical tried another load this morning (smaller load) and it seemed to work perfectly. I can only assume that it was overloaded..
The filter at the bottom...? Mine seems to do a quarter turn and won't come out
Good day, I have the 8kg ++
I noticed it drains water out that when start to wash
What is your recommendation to solve this
can this be used in a built in space of washing machine, because I read it is freestanding machine
In theory it can be put into a built in space, but they are really designed to be used in a freestanding space.
How do I open up the bottom to clean out the tube if it's got debris inside. My water is not filtering out properly.
The main thing you can do is to use a flat headed screwdriver to gently prize off the plastic trim on the front of the washer. that way you have access to the pump filter
How do you fix it when it’s rattling everywhere when washing
If this is a new washing machine then make sure the transit bolts have been removed. If they have then it sounds like it could be the bearings that could have gone
Hi. I just purchased this model last week. My question is when I put wash on and the spin cycle happens. The machine physically moves all over my kitchen and by doing this it broke my plug socket. How do i keep it grounded so it doesn't move. I've just had a new kitchen fitted too. Please help. Thanks regards yas
This does sound odd and i would check to see if the transit bolts have been removed from the back of the machine. The main reason a machine will move is if the transit bolts have been left in which will damage the machine and will not be covered under the warranty.
@@lords-electrical thank you I will try that
What’s the normal wash
Excellent instructions thankyou..
How do you unlock the dam door mid cycle?!
You can't normally unlock it mid cycle as it will have water in the drum and it will need to be emptied first. You will need to cancel the program and drain the water before selecting a new program.
@@lords-electrical this seems unusual. I've had machines before where you pause the cycle and the door unlocks after a few minutes where you can either remove an item or add one. What happens if a phone is in a pocket? You wouldnt be able to get it out and essentially would have to run the programme or take the machine apart. This seems like a design oversight from Hotpoint
Is the colour graphite and silver or is it graphite and bronze? It seems to look different colour on different websites. Just a bit confused
This is graphite
Please how do I raise the legs of the machine. I have the 10kg
Under every machine at the front of the machine you will have adjustable feet that are designed to level the machine
Thank you
I purchased a used washing machine model hotpoint 7kg, I noticed 2 things missing the level liquid measuring and the cold water hose at the top left hand corner
Mines has stopped working .what should I look for for trouble shooting .it's only around a year old
First of all is there power to the machine? if there are no lights on at all then it could be a faulty socket or a blown fuse. After that i would see if Hotpoint are willing to help out if its still under a warranty.
There is power to the machine and lights come out .But when you start a cycle it cuts out and locks the door .it actually started by making a loud noise during the spin cycle ,after that is stopped mid cycle .
How do you dry only
This model is only a washing machine and not a washer dryer
Buy a tumble dryer
How can I get my hotpoint to spin only?
There should normally be a program that says Spin or Rinse and spin and turn the rinse off.
How do you dry using this machine ?
This is just a washing machine, not a washer dryer
Good morning! I bought this washing machine and l washed 1 cicle without taking of the transportation screws. At one point it stopped working and it doesn t switch it on at all. Do you think it can be recovered ? Thank you!
Always a difficult one to answer as it may need an engineer in to see what damage has been caused.
@@lords-electrical thank you very much!
Same happened to me. My machine worked after but vibrating and very noisy . Did u find a solution for the problem with hotpoint ?
HOW DO YOU CHANGE DURATION OF WASH
Experiment with changing the programme settings and push buttons, it's really the only way to find what you want.
I put a cotton wash on at 4pm a small wash it’s now 6 pm and it’s still washing ??
That can be correct as even a small cotton load can be over 2 hours
How do I use a program to self clean the machine?
If a machine hasn't got a dedicated self clean program then i would normally recommend just selecting a Cotton program, putting it on a 90 degree wash with no items of clothing in there. That way it will put the machine through a high temperature program to clean the machine
Every time we use the dryer part it knocks the central heating off and when it finishes drying the heating comes back on 💁
That sounds odd, i am not sure what it could be, if its still under the 1 year warranty, i would give Hotpoint a ring to see if they can call out to check it over for you.
Sounds like your heating thermostat is kicking in when your tumble dryer is running.
Good video , but I’ve just bought one and the drum ticks when it spins , and when you hand turn the drum it ticks and goes really stiff … anyone know if it’s normal, thanks
I would keep an eye on it but it could just be the motor brushes bedding in. If it is still the same after around 10 washes, i would contact Hotpoint to get them to have a look at the machine
Can this machine wash,spin and dry ?
This is a washing machine, so can wash and spin but not dry the clothes
I got this machine and after 5 weeks, it make a horrible burning rubber smell. Hotpoint fobbed me off and said it is the drum rubbing against the rubber. It might do that time to time..... 🤨🤨
Hi, do you know how to turn off the finishing cycle beeps??
You can't.
Why some washing powder stay after the washing finish ?
Couple of reasons for this. First of all make sure the water pressure is enough to take the powder through the machine. If its too low then there may be residue left at the end. Also you may be overdosing, so may be worth reducing the amount of powder you put in the machine, as modern machines don't need as much detergent as older machines used to.
@lords-electrical Thank you for that reply .I will try less washing powder ,but if its low water pressure how to fix this plse?
Can this do a 60 degree wash in approx an hour? Thanks
No
But we're is the filter ?
the machine is great but finding that when i use fabric conditioner it smells great when washing done but when it dries on the line smells not so nice why and has musty smell when it dry, it is not the washingg machine and not overfilling the fabric condtioner tray any ideas... it really is driving me mad
How do l clean the filter
If you remove the flap at the bottom of the washer then you should have access behind there.
I was just going to say you missed the auto clean just got ours wasn't sure hiw to do it
Press and hold the extra rinse button, use a bit of washing machine cleaner in the powder drawer.
Thank you I now know more , I can do shorter time washes on rapid option
Excellent video thanks
My machine takes time to come on,and when it's come on it shows F 12 and it's don't work,what should I do sir
I've just had a look and it indicates the the upper control board is not communicating with the main control board. It may just be a case that a connection or wire has come loose for some reason.
I want to know how to remove the lock from it
Lock??
I have the older version of this but in white
Hi, could you perhaps tell me the most energy efficient wash as the manual for the hotpoint nswm944cbsukn washing machine doesn't show energy consumption for all cycles listed. This would be a great help thanks!
Assuming your machine has it, then the Eco 40-60 is normally the most efficient wash. It will take a long time to wash but it is an efficient way of washing.
Mine showing F18 don't know what to do 😢😢
Like it, very useful information
Yeah. Thanks but you didn't cover the section to put liquid soap, detergent , fragrance and bleach. Thanks
Why does my washing machine bleep during cycles
Not too sure, but sometimes it can be that there is an issue with the water supply or it could be the waste outlet that may be blocked if it is struggling to pump water out