Perfect! Thank you more um time. Just for exemplify, here in my country, the default set to oil change is 6000km!.. But now BMW don't will take me so much money in so less time...
they can check the reset counter using their obd scanner but that will only give them the number of times its been done, not whos done it or how. they usually just check the service books to see if its been stamped by a dealership or not.
Hi, and think you for your video, really. In the Idrive, we have the service historic, what happen about this historic when you do this manip? Thank you, Michaël from France
if youre worrying about any non-dealer work on your car 'voiding the warranty'- dont. make sure you use genuine parts, approved fluids and keep your receipts and dates of work written down and you are 100% sweet. in order for dealerships to refuse a warranty claim based on non-delaer work they need to prove its not been serviced or service wrong.
Most likely your washer pump or jets are blocked. We saw this frequently, even in newer vehicles where the washers hadn't been used for a while. The inside of the washer bottle is dark, warm and moist which means mold can grow in it and cause blockages. You will need to remove and clean the washer bottle with degreaser. Disconnect the hoses from the washer pump and use compressed air to purge the hoses and any remaining gunk inside them. You should see water and air spraying strongly out of the jets when you do this. If you don't, then the washers are blocked too and will need to be removed and cleaned with a small pin. Let me know how you go mate.
Hi BMTroubleUI have succeeded to reset some of them, but after brakepads replacement i get an error message "reset unsuccessful".Any clues or work arounds ?Br. Olsen
Thanks for this, just spent the afternoon fitting me pads and sensors to my M135i... saves a trip to a service place to get this sorted!!!
Thanks for help
Perfect! Thank you more um time. Just for exemplify, here in my country, the default set to oil change is 6000km!.. But now BMW don't will take me so much money in so less time...
they can check the reset counter using their obd scanner but that will only give them the number of times its been done, not whos done it or how. they usually just check the service books to see if its been stamped by a dealership or not.
Good video, thanks. Channel name is hilarious 😜
Hi, and think you for your video, really. In the Idrive, we have the service historic, what happen about this historic when you do this manip? Thank you, Michaël from France
Hi, Do you know where is the engine number located on the F20?
The BMW dealer can detect if i reset the service light indicator on my F20? Thank you about video.
Thanks mate 👍
Thanks heaps bro
if youre worrying about any non-dealer work on your car 'voiding the warranty'- dont. make sure you use genuine parts, approved fluids and keep your receipts and dates of work written down and you are 100% sweet. in order for dealerships to refuse a warranty claim based on non-delaer work they need to prove its not been serviced or service wrong.
Cheers dude... 👌🏼
My windshield pumps aren't working (both front and back) but my headlights' pump is working properly. What might be the problem?
Most likely your washer pump or jets are blocked. We saw this frequently, even in newer vehicles where the washers hadn't been used for a while. The inside of the washer bottle is dark, warm and moist which means mold can grow in it and cause blockages.
You will need to remove and clean the washer bottle with degreaser. Disconnect the hoses from the washer pump and use compressed air to purge the hoses and any remaining gunk inside them. You should see water and air spraying strongly out of the jets when you do this. If you don't, then the washers are blocked too and will need to be removed and cleaned with a small pin.
Let me know how you go mate.
@@BMTroubleU well no energy gets into the plug, what might it be since theres no fuse?
@@bardajoca there is a forum post for this issue here-
www.bimmerfest.com/threads/f20-windscreen-washer.1272850/
See how you go
@@BMTroubleU thanks, I've already posted there too, waiting for an answer. I'll try to reset all car errors
Thanks very much !!! Good explanation !
Just what I needed. Thanks
Thank you, really helpful! 😀👍🏻
Very Helpful THANKS!
B M trouble you 😂😂
Spot on , worked a treat. Thank you.
Hi BMTroubleUI have succeeded to reset some of them, but after brakepads replacement i get an error message "reset unsuccessful".Any clues or work arounds ?Br. Olsen
Nice One... Double handy
Bm troubleu😂