How to reset service reminder in BMW 1-Series (E81 E82 E87 E88 inspection)
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2015
- Perform BMW 1-Series service reset and clear the reminder in BMW E81, E82, E87, E88. This procedure does not require diagnostic interface. You can do it yourself without visiting your BMW dealer.
In this hidden service menu you can reset service reminders for:
legal and insurance,
emission check,
brake fluid,
engine oil,
general inspection,
front brakes (rotors and pads),
rear brakes (rotors and pads).
More at mr-fix.info/bmw-1-series-servi...
Music by Dan-O at DanoSongs.com - ยานยนต์และพาหนะ
![โกหกเธอทั้งนั้น (Pinocchio) - SERIOUS BACON [Official MV]](http://i.ytimg.com/vi/P1HhTYwrR5A/mqdefault.jpg)
IMPORTANT TIP - this only works if your doors are CLOSED. Otherwise you get the 'exclamation mark' and the reset will not proceed. Otherwise works exactly as posted. Thanks for the post Mr. Fix! Very helpful...
This is exactly what I've been looking for .. many thanks
👍 happy to help!
Top stuff, can finally reset that vehicle inspection reminder 😂😂
Thank you very good information.
Great stuff, thank you.
is there's one for cabin microfilter reset? Thank you.
Thank you, it's super information!
Happy to help! Check my other videos about BMW 1-Series. maybe you'll find something useful.
THNXS MAX this was exacly what I looking for;)
Spot on
Really helpful ! Thank you !!😊
Welcome in the x1 group europe 😉
Nice how to's
Thanks! :)
thanks... used to reset it vie rheingold, didn't know there's an easy solution :D
I believe that if you have navigation you can do it even easier though the iDrive menu.
Thanks for info 👍👍👍
Thanks
Sorry for asking the first light on the menu, how do you call it?
Hi! I have a BMW 120d m47. Few days ago i got the yellow check engine icon in my display. Took my icarsoft BM 2 scanner and found some error codes on air mass meter and the Intake air charger sensor. Both of these is been replaced. I deleted the codes but they just came back :( Is there a way to delete the check engine light in the display?
Thanks for your very informing videoes :)
MAF sensor must be initialized with rheingold software to function properly... so don't waste money on some chineese scaners, either buy proper K-DCAN cable and study on how-to and install rheingold yourself(might be dangerous if you do something you're not supposed to), or visit your local serviceman to fix the issue... malfunctioning or not initialized MAF sensor might cause lack of torque on start(low rpm), because DDE gets wrong measurement and decides to ignore the MAF sensor at all and work on default program, this causes lags and lack of power... if you're not familiar with how the engine alnd all the sensors work i suggest you visit those who do... good luck
also if you read the manual, check engine means exhaust problem, most probably DPF oxygen sensor malfunction or DPF pressure sensor malfunction or DPF itself being clogged... most of chinese sensors only scan engine module so you might not see the problem
p.s. in case you find yor DPF being clogged, i suggest finding a man or a company to cut if out and block EGR/AGR functionin by flashing your DDE... it doesn't cost much but should permanently remove all the problems with the exhaust(just don't get caught if your laws prohibit this xD cause it won't be euro4 anymore)
Thx
good
hello, I just bought an e81 120d msport 2007, it was all working fine then one day I was getting to know all the buttons inside the car, when I turned the car off and locked it, I noticed that the dashboard light showing time and temperature, radio, start button were still on permanently, I had to disconnect the battery. Today I connected it again and went for a quick drive and noticed that the ABS light had come up on the dashboard and the speedometer wasn't working, although the RPM was. What can I do please?
not sure what was your problem, but if you read this - don't a buse disconnecting the battery on 1er e-series, it may cause FRM module malfunction randomly and you'll pay lotta buck to reflash it... its a know issue
Mein Fahrzeug ist Bmw e87 Baujahr 2010. Ich mache genau wie beschrieben, aber nur km wird als "0" geschrieben. Kilometer und Uhrzeit erscheinen nicht auf dem Display.
Make sure doors are closed.
With what buttons i choose new date? thanks
The UP/DOWN wheel on the left stalk.
i tried this on my bmw 120i 2006 with all the doors closed and nothing happens i hold it and hold it and nothing comes up
Wauw
does this work for a 118d sport? 2007
Yes, should work as well.
Sport 🤣🤣
Ok
Doesn't work at all here. 2007 118i E81. When I push the ignition without starting the car, nothing happens. When I keep it pushed in and release it, I get a big exclamation mark, something starts whirring onder the bonnet, and an alarm will sound. The only light on the display is the engine failure-light in yellow. It won't react on the BC button, nor the trip reset. I guess my car has some factory-built in lock against fiddling about with it. Will consult my (non-dealer) specialist soon, he'll probably fix it for free.
Keyless system? Tried with door closed?
Zdraveite. Ush zanolqvah masloto i mi izlqzoha nekvi kodove. I sega nemi izlizat kilometrite na masloto katogo zanolqvam restart imi izliza 0. Kilometer posle kato mina naprimer edin kilometar postoqno mi sve ti cherveno za smqna na maslo. Kakvo da napravq zadami izlezat kilometrite na masloto. Ako znaete.
Yeah, sure.
Didn’t work light still on