I concur with the thought that you may have hit the limit of current that ESC can pass through it. A 80 amp esc may be in order. I'm still a fan of the low turn Radeon motors. Great video, and I'm certainly impressed that a speed run car is still keeping its great looks. I think mine was wrecked at just over 30 mph. Keep it up! Will you be entering this years poorboys speed run? Its coming up in less than 3 weeks.
In Japan next week, I'm getting a 61T TT02 hop up gear an 25, 27, 29, 31, 33 and 35 motor gear. I will also pick up some cheap hop ups, motors and tamiya program servo has 5 settings.
@rctamiyaaddict4687 thanks, don't worry its not my first time there. The rc cars amd parts are way cheaper and duty free so now it summer I will travel liht and come home heavy 😅
I ended up with "Tamiya 54229 06 Mod. FF03 Pinion Gear 29T" and "Tamiya 54500 High Speed Gear Set" wtih a 64T spur . Motor is Torque Tuned and a 2S LIPO. Runs really fast...I have no way to meassure the speed.
@@rctamiyaaddict4687 I WORK FOR BIDDLE & MUMFORD GEARS LTD. IN BUCKHURST HILL ESSEX ENGINEERING FIRM DOING ASSY AND WE HAVE SAME TROUBLE IF SOMETHING SLIPS ON A SHAFT. GOOGLE MY WORK PLACE
Awesome you got to 30mph, Bummer about the RZ motor... What esc are you using? I think most brushed Tamiya esc are rated for 23 turn motors. If your using the Hobbywing 1060 esc, your good to go down to like a 13 turn motor.. This is where gear ratios will come into play, A motor will only pull to a certain ratio then fall off or over heat, hence, why some ratios are faster with a smaller pinion, its weird....
This is great. I continue to watch with interest!
Awesome, thank you!
I concur with the thought that you may have hit the limit of current that ESC can pass through it. A 80 amp esc may be in order. I'm still a fan of the low turn Radeon motors. Great video, and I'm certainly impressed that a speed run car is still keeping its great looks. I think mine was wrecked at just over 30 mph. Keep it up! Will you be entering this years poorboys speed run? Its
coming up in less than 3 weeks.
It's great that you hit 30mph! I'm looking forward to seeing what you do next.
Thanks. Hopefully we can squeeze some more speed out of it.
In Japan next week, I'm getting a 61T TT02 hop up gear an 25, 27, 29, 31, 33 and 35 motor gear. I will also pick up some cheap hop ups, motors and tamiya program servo has 5 settings.
Very nice. Hope it all goes well for you.
@rctamiyaaddict4687 thanks, don't worry its not my first time there. The rc cars amd parts are way cheaper and duty free so now it summer I will travel liht and come home heavy 😅
I ended up with "Tamiya 54229 06 Mod. FF03 Pinion Gear 29T" and "Tamiya 54500 High Speed Gear Set" wtih a 64T spur .
Motor is Torque Tuned and a 2S LIPO.
Runs really fast...I have no way to meassure the speed.
Have a 63T spur to try out soon
You need to polish the shaft as slipted pinion would of burred up the shaft power motor and polish shaft with emery cloth or fine file
I think you’re right. Hopeful and get it usable again.
@@rctamiyaaddict4687 I WORK FOR BIDDLE & MUMFORD GEARS LTD. IN BUCKHURST HILL ESSEX ENGINEERING FIRM DOING ASSY AND WE HAVE SAME TROUBLE IF SOMETHING SLIPS ON A SHAFT. GOOGLE MY WORK PLACE
@@rctamiyaaddict4687 GOOGLE WHERE I WORK.
BIDDLE & MUMFORD GEARS LTD. ITS IN BUCKHURSTHILL ESSEX
Awesome you got to 30mph, Bummer about the RZ motor... What esc are you using? I think most brushed Tamiya esc are rated for 23 turn motors. If your using the Hobbywing 1060 esc, your good to go down to like a 13 turn motor.. This is where gear ratios will come into play, A motor will only pull to a certain ratio then fall off or over heat, hence, why some ratios are faster with a smaller pinion, its weird....
Hope to see you this year in the PB speed run. Of course driving an," Eddie Van Something " when it's announced.
It has the ESC it came with, THW-1060. Be looking forward to see what car PB RC goes with this year.
@@rctamiyaaddict4687 Awesome, the 1060 seems to be the top choice.
@@Paul__FC Me Paul? Not sure what I'm doing....
@@UncleBobsRC yes! I miss that caddy to this day!
Nice video 👌 shame about that motor 🤔
Thank you. I’ll have to see if there’s anyway to recover it
Hmm that shaft on your motor does not want to cooperate 🙃
Did you find out what was wrong ?
The grub screw was out. Probably the pinion damaged the shaft while it was spinning around.
Great video. But why did you use a bigger spur gear than the stock one?
The stock is 70t, the one installed is 64t giving a better ratio