The PosiTest AT measures the force required to pull a coating away from its substrate using hydraulic pressure. Pressure is calculated based on force and test area and represents the coating's strength of adhesion to the substrate. The actual pull-off force requirements vary by coating type and job specification. Please contact our technical team for additional information at techsale@defelsko.com or +1-315-393-4450.
The inspector failed my industrial painting coatings because I have to many mils specified by the paint manufacturer .by using the at tester and the adhesion passes can he still fail it?
Our PosiTest AT pull-off adhesion tester measures the adhesion (bond) strength of the applied coating. For measuring paint mil thickness, our PosiTector 6000 (steel/aluminum panels) or PosiTector 200 B (plastic panels) is required. Please contact us for further discussion and solution recommendation at +1-315-393-4450 or techsale@defelsko.com
We provide the test dollies as a single use consumable. They can be reused provided the dolly surface can be returned to its original condition. This is typically performed by heating and scraping the cured epoxy from the surface of the dolly. To discuss this further, please contact us at +1-315-393-4450 or techsale@defelsko.com.
How do we calculate the required pull off force
The PosiTest AT measures the force required to pull a coating away from its substrate using hydraulic pressure. Pressure is calculated based on force and test area and represents the coating's strength of adhesion to the substrate. The actual pull-off force requirements vary by coating type and job specification. Please contact our technical team for additional information at techsale@defelsko.com or +1-315-393-4450.
The inspector failed my industrial painting coatings because I have to many mils specified by the paint manufacturer .by using the at tester and the adhesion passes can he still fail it?
Our PosiTest AT pull-off adhesion tester measures the adhesion (bond) strength of the applied coating. For measuring paint mil thickness, our PosiTector 6000 (steel/aluminum panels) or PosiTector 200 B (plastic panels) is required. Please contact us for further discussion and solution recommendation at +1-315-393-4450 or techsale@defelsko.com
DEFELSKO
I need an apparatus to remove tiles from dollies after the test
We provide the test dollies as a single use consumable. They can be reused provided the dolly surface can be returned to its original condition. This is typically performed by heating and scraping the cured epoxy from the surface of the dolly. To discuss this further, please contact us at +1-315-393-4450 or techsale@defelsko.com.
Advance Polyester powder color adhesion test it's advance than old testing methods of cross hatching