How do these home made Nanoleaf panels look when the LED light is off? Do they look somewhat professionally made? I realize they cost a lot less so a good alternative.
Ihese are defintely some of the best DIY looking nanoleaf panels, however can you make a video explaining how you wired everything up? All you did was show you a RGB strip into 3 pieces and looses wire, then all of a suden they were connected, and had adapter wires also connected that I never saw.
Hi nice DIY, it's the cleanest looking in youtube that does not require 3D printing. I'm considering to do it myself and I have a question. Is there a reason why you scored the acrylic sheet? I thought it could help diffusing the light (and preventing hot spots) but it's the job of diffuser sheet. So I couldn't find a reason why you scored the transparent acrylic sheet. *Edit: also not sure what is the function of the transparent acrylic sheet (then later scored). Since the foam board is used as base and the opaque acrylic sheet as diffuser. Can I not use/ omit the transparent acrylic? It would speed up the making process.
Acrylic acts a lot like fiber optic wires, meaning you can shine light into one side and it comes out the other. The scoring catches the beam before it reaches the other side, putting off light in the middle, even though there's no LEDs there. I did a bad job explaining it, but look up LED acrylic nightlight, it uses the same tech I'm talking about.
@@DayPCG yeah I realized that after I tried to make this DIY. Thank you for giving the name of the effect. Just FYI for anyone who is reading my comment and trying to make this, the triangle measurement between clear acrylic and the diffuser should be different because the clear acrylic will be put inside the foam triangle which size has been reduced by the vertical/ side wall. So if the diffuser is 24 cm then the clear acrylic should be 23.4 or less. Also I use 144 LEDs/m strip because the 60 LEDs/m density is just not that bright. I've tried both and besides being brighter the 144 strip gives smoother transition as well. I spent about $50 for 9 panels plus 2 days of my time. The result is okay but nowhere near the nanoleaf quality.
Hmm, nice work but it needs a little adjusting to make the 3 corner "light spots" disappear. I wonder if adding more led's will work for example instead of filling the 3 corners, filling the 3 sides will work better... Well the brightness might be a problem then but lower powered led's might do the trick.. Also a few holes in the back for ventilation might increase the life and brightness expectancy...
@@DBsLAB bah thank you....amio ekta korbo bhabchi with WS2812B strip, led gulo kotha theke kena jay I mean reliable, Amazon prices are too high if I buy in bulk
and plz can u make a separate vdeo on how u made the connection part in details that how u connected all the panels and all....mainly the connection part please
Can you tell me what is the power supply you are using for ws218b lights Is it 5v 10amp?? If I want to add 4-6 more panels what power supply should I use? If possible give us the link of the power supply too Btw greaaaaaat video .....it was my dream to make these... your video made it possible thankyou broo
@@debarghyamukherjee4462 yes I searched 3.6amps for 60 leds in full bright mode ..(considering 60m amp per color) i purchased a 5v 5amp power supply, but don't know how to regulate the current keeping a constant voltage,,.. I don't want to risk damaging my 60 leds with 5amp current from the power supply.(as the strip is not that great quality) Can you tell me how do I limit/regulate the current from the power supply ? Or which power supply did you use for the 60 led setup? Can you suggest me how
Aapni ekhane acrylic sheet with vinyl paper ta keno use korlen ebong acrylic sheet e vinyl paper ta kon dike use korechen mane jedike cross marking korlen, oi dike na tar ulta dike? R set korar samay vinyl side ta upar dike thakbe ki nicher dike?
Acrylic er upor vinyl use korlam light reflector er jonno (photo paper use korle better hoy). Jei dike cross korechi tar opposite side e vinyl lagiyechi. Ar frame er moddhe cross kora side ta uporer dike thkbe, vinyl kora side ta nicher dike.
You can try cutting out a piece so you can block the LED strip from the front, I guess. (That way, the light's hotspot won't be visible from the front of the panels)
hey bud i have a small problem when i connect the pannel to gether / the leds it colors get mixed up it happens then ever i connect more than 2 panels using LED strip WS2812B Controled with DC5-24V Mini 14 Keys RF Wireless Remote Controller For WS2811 WS2812B 5050 RGB LED Strip Light connected with a usb to the pc any help why they lose the colour scheme when i connect more then 3 panels it even seems when red is involved the controler just frezes till i take out some panels
What about input and output you told man iam so confused what the heck you said about Male connector and female connector and about power input and output
@@DBsLAB goddamn i didnt expext u to reply so fast, i mean damn. I respect you bro, i am actually doing this, i brought all the material, heading out to get the glass now, i will share the imgure once i am done.
i am having trouble buying "white laminate sheet". could you provide me with a link from aliexpress or shopee? what is the exact name of this item? thanks! :D
Bluetooth Argb controller - www.amazon.in/WS2812b-Strip-Controller-Control-Android/dp/B08DRTTL1K/ref=sr_1_17?crid=304W7OIQTFLT1&dchild=1&keywords=ws2812b+led+strip&qid=1599935982&sprefix=ws2%2Caps%2C519&sr=8-17
I removed Background Music for Copyright Issue.
Please give all materials links
Oof
You can always replace the Audio using TH-cam Studio and select a TH-cam library music 🙄🙄
Embarrassed to admit I didn't expect this much quality from a fellow Indian's channel.
Don't underestimate us🙂
@@aug7776 yeah boiiiiiiiiii ! (⌐■-■)
Ok ok
Why are you so surprising ?😂😂
Indians are in every Top notch places !
This went from I can do this to wait I’m lost 🤔
that too pretty quick 😪
Awesome work
Currently Working on this project (inspired by your work) but with RGB5050 strip lights.
everyone was doing it with 3d printer or they looked ugly , but yours is great
Some quality video by an indian.
How do these home made Nanoleaf panels look when the LED light is off? Do they look somewhat professionally made? I realize they cost a lot less so a good alternative.
Love you from West Bengal..😍
Bro how much sunboard are in this project . Please give hole soundboard measurements.
I did it. 24cms X 24cms X 24cms triangle. You can do it your size too.
Personally I just bought them. The music sync is great. The brightness is better and the colour spreads the panel better
how much you pay?
@@hahaganteng7450 I paid £162 for 15 panels because I had a code to get like 50% off
Ihese are defintely some of the best DIY looking nanoleaf panels, however can you make a video explaining how you wired everything up? All you did was show you a RGB strip into 3 pieces and looses wire, then all of a suden they were connected, and had adapter wires also connected that I never saw.
This channel is underrated af 😍😍 love ur videos
Hola, haces envios? Me gustaria tenerlos en mi nuevo setup. Un saludo desde Sevilla, España 👏🏼😃✨
Bhai deffuser sheet kiske pas milegi kuch idea bta do ye jo material hai sheets wale plz bro 🥺
Hi nice DIY, it's the cleanest looking in youtube that does not require 3D printing. I'm considering to do it myself and I have a question. Is there a reason why you scored the acrylic sheet? I thought it could help diffusing the light (and preventing hot spots) but it's the job of diffuser sheet. So I couldn't find a reason why you scored the transparent acrylic sheet.
*Edit: also not sure what is the function of the transparent acrylic sheet (then later scored). Since the foam board is used as base and the opaque acrylic sheet as diffuser. Can I not use/ omit the transparent acrylic? It would speed up the making process.
Acrylic acts a lot like fiber optic wires, meaning you can shine light into one side and it comes out the other. The scoring catches the beam before it reaches the other side, putting off light in the middle, even though there's no LEDs there. I did a bad job explaining it, but look up LED acrylic nightlight, it uses the same tech I'm talking about.
@@DayPCG yeah I realized that after I tried to make this DIY. Thank you for giving the name of the effect.
Just FYI for anyone who is reading my comment and trying to make this, the triangle measurement between clear acrylic and the diffuser should be different because the clear acrylic will be put inside the foam triangle which size has been reduced by the vertical/ side wall. So if the diffuser is 24 cm then the clear acrylic should be 23.4 or less. Also I use 144 LEDs/m strip because the 60 LEDs/m density is just not that bright. I've tried both and besides being brighter the 144 strip gives smoother transition as well.
I spent about $50 for 9 panels plus 2 days of my time. The result is okay but nowhere near the nanoleaf quality.
Shera hoyeche.Subscribing
Hmm, nice work but it needs a little adjusting to make the 3 corner "light spots" disappear.
I wonder if adding more led's will work for example instead of filling the 3 corners, filling the 3 sides will work better... Well the brightness might be a problem then but lower powered led's might do the trick.. Also a few holes in the back for ventilation might increase the life and brightness expectancy...
why holes in the back?
@@jamestoko heat i guess idk
That was so amazing you did better than the Americans it was unique and quality Wise it was dam good. I will definitely make one of this diy
ohhh god bro i appriciate it very good and clean work its osm bro 🔥🔥🔥
you are the best...I just love love your video...thank you for maki this video..love you
they look super convincing! keep up the good work
Can I use direct defuser ..not Acrylic
Can you make it only with diffuser sheet.
Pls.
Why did you include an acrylic sheet as part of the backing of each triangle? Also, why is the acrylic scored?
wooow nice one bro..
Great DIY man, subscribed....where do I buy these stuffs in Kolkata?
Metro goli te. Professional photography we uplo diker dokane
@@DBsLAB bah thank you....amio ekta korbo bhabchi with WS2812B strip, led gulo kotha theke kena jay I mean reliable, Amazon prices are too high if I buy in bulk
@@2009aritra OFFLINE SHOP - KOLKATA CHANDNI CHOWK ( LED SHOPPE )
t.ly/EySP
@@DBsLAB I called them they do not have WS2812B 144LED/m strip, onno kothao check korbo
LED World
please could make a video teaching how to connect the leds, it would help a lot
check out my latest video, about RGB and ARGB LED
Any way to make it more diffusible ..like I feel like I can see the leds
Bro sunboard kitne by kitne ka Lena padega
The shop, where i can buy 3core wire and male and female header strip please :3 Just say, where you buy it
Thanks so much brother, these came out nicely!
Hey! how did you make it possible for every triangle to have the same color of light?
Banger of a video. Always top tier content
Can I cut acrylic sheet with a normal cutter
Can I use aluminum foil as a light diffuser
you deserve 1mil subs
and plz can u make a separate vdeo on how u made the connection part in details that how u connected all the panels and all....mainly the connection part please
ha. otar upor kaj choleche..
@@DBsLAB ❤️
bro can we use 3mm acryillic sheet and alluminium foil in the back
omg you have best ideas im subscribing
no words just vibes
Appreciate your work bro but could you tell where you got the diffuser sheet from
U can get it from old tv
What is the reason for scribing the acrylic sheet? Just for light diffusion?
Searching for the same ... Why did he do it ?
hi, how do you manage the same color in the same panel?
By using argb led
Male female header led controller they are not available on amazon bro?
Would it look bad without the 4mm acyrolic?
led head should fully cover with acrylic edge.
@@DBsLAB acyrolics are expensive 🥺
I use fiber glass instead of acrylic glass. It's too cheap.
Where are you from?
@@DBsLAB Bangladesh
Why did you used the acrylic sheet like that you could just jave used the diffuser sheet instead?
I am confused how does the acrylic sheet help?🤔🤔
Can you tell me what is the power supply you are using for ws218b lights
Is it 5v 10amp??
If I want to add 4-6 more panels what power supply should I use?
If possible give us the link of the power supply too
Btw greaaaaaat video .....it was my dream to make these... your video made it possible thankyou broo
Ws2812b 5m strip 300leds will draw approximately 5v 3Amps
@@DBsLAB so can I connect a 5v 5amp supply to a 60 led setup like yours??
@@cobaltblue6051 yes you can but its too much. it will work tho
@@debarghyamukherjee4462 yes I searched 3.6amps for 60 leds in full bright mode ..(considering 60m amp per color)
i purchased a 5v 5amp power supply, but don't know how to regulate the current keeping a constant voltage,,..
I don't want to risk damaging my 60 leds with 5amp current from the power supply.(as the strip is not that great quality)
Can you tell me how do I limit/regulate the current from the power supply ?
Or which power supply did you use for the 60 led setup?
Can you suggest me how
Really appreciate your hard work
Bro please put voiceover in your videos this will help us to understand better.
how many millimeters of acrylic?
Hi! Thank you so much! Can you please make an explain video about when you weld wires with rgb led strip? :)
If you find a video please tell me me too i didn't understand how he accord it hope he make a video
I will make a video on this purpose.
@@DBsLAB thank you soo much😊
If I send this video to my local electrician... will he able to make this
Wow Cool
wanted to ask abt the core wire could not find a correct one.I need help. Pls send amazon link
Any single wire 3 parallel
Hey what is the name of the white length from which you made the frame?
Sunboard
its awesome!! gona make this soon
I appreciate you ,your work is excellent ।
Can you prepare these things for my company,I will pay you for it👍🏻
I can make one for you
If you want I can send you pictures of the one I made
@@AVANI983 what about money
@@ramandeepofficial7657 RS 4000/-
Can I use a led strip
Do I have to code the strip? Or just a controller will do?
I use Additional controller. And please stay with us we will make diy Nanoleaf controller.
Can you make this for me? ❓️
can i link this with my motherboard? to sync with my pc..
1 m argb strip is enough right? for 8 panels
Yes you can
Aapni ekhane acrylic sheet with vinyl paper ta keno use korlen ebong acrylic sheet e vinyl paper ta kon dike use korechen mane jedike cross marking korlen, oi dike na tar ulta dike? R set korar samay vinyl side ta upar dike thakbe ki nicher dike?
Acrylic er upor vinyl use korlam light reflector er jonno (photo paper use korle better hoy). Jei dike cross korechi tar opposite side e vinyl lagiyechi. Ar frame er moddhe cross kora side ta uporer dike thkbe, vinyl kora side ta nicher dike.
@@DBsLAB thanks brother for reply. Aapna ke copy korar chesta korchi.😊
bro is there a way to eliminate the hotspots in the corners it will look perfect without those
You can try cutting out a piece so you can block the LED strip from the front, I guess. (That way, the light's hotspot won't be visible from the front of the panels)
add foam inside where the LEDs are
How about tilting the led lights downward?
@@taruntushar8337 that would make the lights less bright since the LED isn't directly towards the diffuser, I think.
Nice vidéo 🤞💪
But what are the specifications of the triangle
24cm each sides
@@DBsLAB thank youu 💪
Awesome... Description ta hebbi likhechis toh!!
Hi can you please help me out in getting the Light Diffuser Sheet.Can you please provide any Link.?
Kindly share acrylic sheet buying link
Can I buy those please
Is their any online link for buying light defuser sheet??
just buy milky white acrylic sheets from amazon or a school supply, lighting store
hey bud i have a small problem when i connect the pannel to gether / the leds it colors get mixed up it happens then ever i connect more than 2 panels using LED strip WS2812B Controled with DC5-24V Mini 14 Keys RF Wireless Remote Controller For WS2811 WS2812B 5050 RGB LED Strip Light connected with a usb to the pc any help why they lose the colour scheme when i connect more then 3 panels it even seems when red is involved the controler just frezes till i take out some panels
Use high amp power.
What about input and output you told man iam so confused what the heck you said about
Male connector and female connector and about power input and output
Excellent work bro... Can you do a video on the DIY PSU Shroud side plate?
Nice :) also im that guy from the TS discord server :)
Thanks bro
I have a question, can we use the layers of a monitor for the front part?
Bro, can i use real glass instead of acrylic glass , please respond real quick.
No. Only acryliv glass or fiber glass.
@@DBsLAB goddamn i didnt expext u to reply so fast, i mean damn. I respect you bro, i am actually doing this, i brought all the material, heading out to get the glass now, i will share the imgure once i am done.
What kind of glue do you use for that material?
Flexquik (strong gule)
Asowme bro.... can we get the link to the led controller ur using???
www.amazon.in/dp/B081RSX7C8/ref=cm_sw_r_cp_apa_i_xxQOFbJHZWDPP?psc=1
With out remote www.amazon.in/dp/B06XSJ9Q2C/ref=cm_sw_r_cp_apa_i_8xQOFbMKX9GKZ?_encoding=UTF8&psc=1
I don’t have the skill to make this but fun to watch
i am having trouble buying "white laminate sheet".
could you provide me with a link from aliexpress or shopee?
what is the exact name of this item? thanks! :D
Hey, how do you manage the addressable RGB?
u can use a cheap controller or u can use a esp8266 with wled flashed on it the esp one is just wayyy better
can you please put some links where buy these products?
Check out description
It’s look great 👍
dada tmr sheet er pechonei toh white plastic chilo toh ota tule vinyl diye kno wrap korle alada kore acrylic??
ota vinyl er alternative photo paper use korle better hoy.. tokhn amr kache ota chilo.. tai vinyl use korechi.
@@DBsLAB thank u
Hi, can i get the link to buy the connecters (male and female header connecter) i cant find it in local stores
Absolute insanity
Sab acha hai..bas lighting buhat halki hai
Is it possible to connect other smart LED controller. ??
Yes you can use any ws2812b led controller. Please check description.
Bro why 30 LED? Why Not 60 LED? Can u explain?
good
Can we use 4mm
Beautifully done...keep it up :)
what is the measurement of one side of pannel
cool
Respect ✊
Calidad 💪🏼👌🏻
How do u control that a-rgb strip with mobile or wifi something??
ARGB Controller with Bluetooth
You can buy from amazom
Can u give me a link for that??
Bluetooth Argb controller - www.amazon.in/WS2812b-Strip-Controller-Control-Android/dp/B08DRTTL1K/ref=sr_1_17?crid=304W7OIQTFLT1&dchild=1&keywords=ws2812b+led+strip&qid=1599935982&sprefix=ws2%2Caps%2C519&sr=8-17
@@DBsLAB I am looking for 1 which is compatible with Alexa if possible :)
Nice,
Thanks
why dont just use white/milky acrylics?
Sad to say, I didn’t have that at the time. And you are right I would have gotten better results if I had used white acrylic alt of defuser.
How much centimetre is it
Bro I have a small question , if I place led on 3 sides instead of 3 corners , will the hotspot dissapear
What to do now?