these are without doubt the best LED wall lights i have come across. Thank you for the Thingiverse link, i will be trying to do your work justice in the near future.
I am printing this out for myself right now!! I hope that part two comes out soon. But there is no rush because I get that the Pandemic has made it hard to do a lot of things. :)
Hallo ich habe der komplete stl datei auf 90% reduziert und mit Anycubic I3 gedruckt das projeckt ist pefeckt ..habe nur eine frage antsat Y spliter kahn ich der led strip auch Löten oder ? danke tolles projeckt
They need to be solid. For the GLAS you take Lines or ZigZag. Change top/bottom line direction to [180,90] im cura I will explain more in part 2 in my christmas holiday's (in about 2 weeks)
@@groundpounder3396 cheers mate ... might start working on this project as it looks super awesome .. might have a couple of questions along the way :) thanks !!!!
Ja die sind gedruckt und von hinten mit einer dünen schicht weissem farbspray besprüht worden. Filament ist Natural Transparent. (der Difusor wurde auch mit dem gedruckt.)
What is the purpose of the spray paint? Your notes imply you painted the GLAS plates? I considered painting the frames a matte white, but didnt think I would need to paint the plates.
Hey excellent work! Thanks for the stl by the way :) Do you think it is possible to avoid printing glass part by using acrylic sheets? In this case, is there any particular thickness to chose, in order to fit the other STL parts?
Hey make shure to use WS2812 LED stripes. www.amazon.co.uk/dp/B088BPGMXB?pd_rd_i=B088BPGMXB&pd_rd_w=zWWC2&pf_rd_p=011646eb-9e9b-4015-898f-4e475f8c352f&pd_rd_wg=NFjhb&pf_rd_r=3W970067GVCJ2R86KFHX&pd_rd_r=2e2a28e8-502b-44a1-9dfe-b12994826d88
Hey the differents are some tiny lashes on the corners where the LED strip crosses each other. 👍 P2X is for Crossing led parts and P2 for the normal ones (see the routing and printing diagramm in the video)
Na dieses jahr ist ja leider schon fast vorbei 😂😂😂 Spass bei seite, hab die meisten aufnahmen schon im kasten. Muss am wochenede noch alles schneiden und dan lad ich es voraussichtlich am sonntag oder montag hoch 😊 sorry für die lange wartezeit
It was 3D printed. Look at the lowest link in the description. The front panel is in the files. There are tutorials about how you can smooth out 3D prints.
Mit einem Splitter. Denn den ich verwendet habe gibt es nicht mehr zu kaufen. Musst mal schauen was du bei euch so kriegst. So sollte der aussehen: www.digitec.ch/en/s1/product/phanteks-3-pin-digital-y-splitter-rgb-400mm-modding-illumination-10393780?gclid=Cj0KCQiAtqL-BRC0ARIsAF4K3WGeLaTzpHFXy1eRWQUhTwZnvGnqIodxGuQqamzZDryDer_3rGpWhYUaAqAsEALw_wcB&gclsrc=aw.ds
Could I modify your design so I can make different patterns or add a way like the nano leafs since it seams the ending looks a bit darker I assume from lack of power at the end so I wanted to add a way to power inject power from the beginning and end also where’s the vid at?
I have yet to research this topic, but intend to get individually addressable LEDs to ensure this is possible later down the line. I have already started the pieces for it so I'll let you know how it goes.
Wow I thought ur account password got lost or something, but this project was worth the wait love the look. do you think transparent Petg will work I didn’t have any natural pla and I can’t find a perfect one. And I’m trying to print more Petg since it’s stronger and easier on my machine
@@SlippySkip you need to much power for 144 Leds/m (ampere) and most controllers only allow up to 500 - 1000 LEDs to be controlled with. So better go for the 60 Led/m 😊👍
Whats Up brow, Im from mexico, im so proud about this project, its so fu***ng amazing, and im thinking on buy a 3d printer... How did u make the front? with whiteFilament? natural filament? wich one bro?? I really like this video man, this is better than the original hahaha
Very good résults ! I have two question You have two alimentation for the all build ? You thinks we Can have juste one ? You buy special strip led or the basic one ?
@@sentex54 no welding or soldering ❗ used a 3 pin connector splitter 👍 on one side is connection to Bluetooth controller and on the other side are 2x LED stripe 3pin cable connector 😀
any one plz help me .. new to 3d printing .. which parts to print for the build i am not able to understand , there a many similar parts .. need to know . which parts are need to complete one leaf # of parts etc and can i scale it down a bit ?
Hey Farukh Scaling down is not possible. The difusor will not fit anymore if you scale it. The full part list and build plan you can see at 04:12 in the video Thank yoi 😁
Imma try this now I bought a 3d printer ! . Anyone that is going to try this keep in mind he used natural pla for the front sheet panel and inner defuser, The rest base and spacers are white pla
This is really cool but the tutorial feels incomplete. How are you controlling the LED's? Are you using addressable strips or just regular strips? Is there other parts I am missing?
Hey thx for your comment 👍 this is part 1, i will release part 2 soon. The corona virus destroyed time planing for this project. And now i have to much work and almost no time for making videos. I just released part 1 of the tutorial so you can already start with printing the parts 😊 and part 2 will come in 1-2 weeks. Tomorrow full part list and instructions in the description 😁
Good work but, that's not how the original works bro... Why don't you make it plug and play? Take some LED pins and mount them on the sides, on one side a female connector and on the other 2 sides male connectors, then also mount some cheap small magnets so it will hold it together. When done, you can just plug the panels on other panels like the original one.
hi bro can u plz reply ... i really like your design .. have some questions .. is the diffuser also printed .. can i use any other diffuser material .. and there are different body designs which oe to use .. plz explain
Hey Farrukh the difusor is printed and spray painted with a thin coat of white. You can also use other milky glas materials. At the moment there is only the big orbs pattern. I will be adding more as soon as i can 😊👍
I was thinking of doing the one with the Arduino and soldering but seeing this, I think I've changed my mind. LED Signal 1 to 2 splitter 3pin - I can only find 4 pin options. I assume this will still work assuming you connect it to the right ports? What app did you use for the color combinations? And where's part 2? :) Just saw your update in the description. Sorry to hear about the problems. Possible APP mystery solved, at least for Android, This app looks like it should work play.google.com/store/apps/details?id=com.spled.pzse I get my lights and adapter, ordered this one. According to the app it should work. www.amazon.ca/ALITOVE-Controller-Control-DC12V-24V-Addressable/dp/B07SG394ND
these are without doubt the best LED wall lights i have come across. Thank you for the Thingiverse link, i will be trying to do your work justice in the near future.
I don't see the link, can you please pass it on to me
you did great , Waiting for part 2
These function better then the one you can buy at high cost . Well done 👍
When the part 2 is coming out? I wanna do it!
Goooosh id like to see part 2 now! Ur a master!
super
Wonderful work my friend. One of the best DIY Nanoleaf projects I have seen. Waiting for Part 2!!! when are you planning to have it released?
we need part 2 :D
Nice
Je viens de finir la mienne. Je me suis permis de modifier quelques trucs mais ton post sur thingiverse m'a été d'une graaande aide ! Merci à toi !!
De rien mec 😁👍
wow
You are the boss, it’s awesome!!! I’m gonna star printing so when you upload part 2 i will have the parts to follow along.
BRO YOU ARE LITERALLY GOD
Best cliffhanger ever 😄👍 still no part 2 hahaha
I know you will not believe it...but part 2 is coming soon ☺️😋
Thank you very much. Very inspiring from Indonesia, really like your work :)))))))
Im waiting for Part 2 👌😜😅
No Problem, im printing since 5 days all parts.... Nearly 50% ist done 😅🙄.
@@jansony2670 Still no part 2?
Waiting for part 2
I am printing this out for myself right now!! I hope that part two comes out soon. But there is no rush because I get that the Pandemic has made it hard to do a lot of things. :)
Part 2🇿🇦
good job. i like it
Hallo ich habe der komplete stl datei auf 90% reduziert und mit Anycubic I3 gedruckt das projeckt ist pefeckt ..habe nur eine frage antsat Y spliter kahn ich der led strip auch Löten oder ? danke tolles projeckt
salut a toi super diy mais comment cela ce fait qu'il y ai deux fois les meme a chaque fois dans le fichier
Salut mec, je ne comprend pas la question 😊english?
Your Dyi is the best I’ve seen you really put some time to defuse the led lights and it shows! Badass build brother !
will a second part come?
What print settings (infill density, infill pattern, print speed) do you use for the clear parts (DIFUSOR HIGH and GLAS HIGH)?
They need to be solid. For the GLAS you take Lines or ZigZag. Change top/bottom line direction to [180,90] im cura
I will explain more in part 2 in my christmas holiday's (in about 2 weeks)
@@jansony2670 Hi, thanks for the great job, still waiting the part 2 or more detail.
Will be part2?
Will part 2 ever release??
Love it mate. When is the next video coming ?
Hi, really interesting project ... so the body of the triangles is made with white PLA and the top flat "cover" is made of clear pla? thanks
Yes 👍 the clear pla is spray painted with a thin layer of white
@@groundpounder3396 only the flat top part (part named GLAS) printed in clear? The others are all printed in white? Thanks !!!
@@darrylportelli the DIFUSOR part is also Clear.
@@groundpounder3396 cheers mate ... might start working on this project as it looks super awesome .. might have a couple of questions along the way :) thanks !!!!
@@darrylportelli thank you ☺️👍
Monsieur, this is the most perfect DIY one i have seen.
Thanks for the sharing and the inspiration!
I love the internet for content like this :)
Thank you, appreciate it 🍀😁👍
Part 2 pleaseeeeee !!!
This was really helpful!
Hallo kann mir einer sagen ob die abdeck platten gedruckt sind und wenn ja mit welchen Filament
Ja die sind gedruckt und von hinten mit einer dünen schicht weissem farbspray besprüht worden. Filament ist Natural Transparent. (der Difusor wurde auch mit dem gedruckt.)
Can you make a hexagon shape nanoleaf??
What is the purpose of the spray paint? Your notes imply you painted the GLAS plates? I considered painting the frames a matte white, but didnt think I would need to paint the plates.
An extra layer of diffusion and a white back plate would make these better than nano leaf.
Hey excellent work! Thanks for the stl by the way :)
Do you think it is possible to avoid printing glass part by using acrylic sheets? In this case, is there any particular thickness to chose, in order to fit the other STL parts?
bạn dùng cách gì để tản ánh sáng vậy,cảm ơn bạn
Would love a part 2!
Wann kommt Part 2? 😉
i want a second part
Are you happy with the CR-10S Pro I’m in the market for my 1st 3D printer
Awesome machine 👍 i recommend to buy the CR 10sPro V2. Printing almost 24/7 for more than a year now 💪
Hi, which LED strip would you recommend? (aliexpress, ebay, amazon, ..) The one in the label is not available. ☺️ Its great!
Hey make shure to use WS2812 LED stripes.
www.amazon.co.uk/dp/B088BPGMXB?pd_rd_i=B088BPGMXB&pd_rd_w=zWWC2&pf_rd_p=011646eb-9e9b-4015-898f-4e475f8c352f&pd_rd_wg=NFjhb&pf_rd_r=3W970067GVCJ2R86KFHX&pd_rd_r=2e2a28e8-502b-44a1-9dfe-b12994826d88
@@jansony2670 thank you! 👍😊
Did you twisted the led strips at the routing diagram? I'm confused at p2x links, thanks and amazing job dude
Yes correct 👍 thank you 😊
Awesome project dude, now what is the difference between P2 Bottom High and P2X Bottom Hight?. Also P2 Top end High won't fit on P2 Bottom Hight.
Hey the differents are some tiny lashes on the corners where the LED strip crosses each other. 👍 P2X is for Crossing led parts and P2 for the normal ones (see the routing and printing diagramm in the video)
@@jansony2670 Thanks Dude!
Part 2 bro.. 😀
It is coming on Christmas Holiday 😊 sorry for the long waiting
Kommt part 2 noch diese jahr 😂
Brauche dringend Infos zur Verkabelung
Na dieses jahr ist ja leider schon fast vorbei 😂😂😂 Spass bei seite, hab die meisten aufnahmen schon im kasten. Muss am wochenede noch alles schneiden und dan lad ich es voraussichtlich am sonntag oder montag hoch 😊 sorry für die lange wartezeit
@@jansony2670 danke für die schnelle Antwort kanns kaum abwarten freu mich auf den zweiten Teil frohes neues
Are the faceplates 3D printed? Or are they acrylic? If printed how did you hide the layer lines so well?
I am wondering the same thing.
It was 3D printed. Look at the lowest link in the description. The front panel is in the files. There are tutorials about how you can smooth out 3D prints.
Nice Video! I build the lamp too, i buy now all parts and beginn to print! thanks!
wie hast du die 2 led streifen verbunden?
Mit einem Splitter. Denn den ich verwendet habe gibt es nicht mehr zu kaufen. Musst mal schauen was du bei euch so kriegst. So sollte der aussehen:
www.digitec.ch/en/s1/product/phanteks-3-pin-digital-y-splitter-rgb-400mm-modding-illumination-10393780?gclid=Cj0KCQiAtqL-BRC0ARIsAF4K3WGeLaTzpHFXy1eRWQUhTwZnvGnqIodxGuQqamzZDryDer_3rGpWhYUaAqAsEALw_wcB&gclsrc=aw.ds
Any idea on when part 2 will be out? Is COVID delaying it?
Part two will be released on Christmas Holiday 😊
@@jansony2670 We are all waiting !!!! is Christmas 2021??? Lol just kiding, but still waiting.
How is the installaton on the wall ?
Wow! How’d you do those patterns with an LED light strip?
how much power supply you use?!?!?!
You sir are a boss, gonna make this for my gaming room :)
@Mr. SONY3DPRINT is it possible to add a mic so it goes on music?
Yes it is posible to run the music from your phone and from your phone microphone 😁👍
and if you have bluetooth on your Pc/Laptop you can play music from them 👍
@@jansony2670 that's awesome so blth it is tough my desktop
Looks cool Dude, I am also a member of the Group too, I will look you up.
For a send I saw 1.76M subs.....YOU THE LIT BRO 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Was hatten die dreiecke für eine maße?
Could I modify your design so I can make different patterns or add a way like the nano leafs since it seams the ending looks a bit darker I assume from lack of power at the end so I wanted to add a way to power inject power from the beginning and end also where’s the vid at?
I have yet to research this topic, but intend to get individually addressable LEDs to ensure this is possible later down the line. I have already started the pieces for it so I'll let you know how it goes.
How long is this led? It’s not 1 meter is it? That’s too small
Gibts eine Möglichkeit das ganze zu erweitern? Kann man weitere Stripes einfach verbinden?
Ja natürlich, aber dann nur mit löten
@@jansony2670 wie sieht es aus mit Part 2 ???
Wow I thought ur account password got lost or something, but this project was worth the wait love the look. do you think transparent Petg will work I didn’t have any natural pla and I can’t find a perfect one. And I’m trying to print more Petg since it’s stronger and easier on my machine
Hey mate 😋 yea i know it is a shame 🙈 yes petg works also for the GLAS and DIFUSOR
@@jansony2670 awesome. Do you think 144 per meter leds would look more defused compared to 60 per meter leds? Also how much did this all cost?
@@SlippySkip you need to much power for 144 Leds/m (ampere) and most controllers only allow up to 500 - 1000 LEDs to be controlled with. So better go for the 60 Led/m 😊👍
@@jansony2670 alright thanks 👍
i need part 2 pleaseeee
Whats Up brow, Im from mexico, im so proud about this project, its so fu***ng amazing, and im thinking on buy a 3d printer...
How did u make the front? with whiteFilament? natural filament? wich one bro?? I really like this video man, this is better than the original hahaha
i need part 2 :(
We're waiting part 2 🙂
Where is the second part?
The frontral plate and white or natural pla? Thank you for your work.
when is coming part 2? :p
im w8 for sart print
Very good résults ! I have two question
You have two alimentation for the all build ? You thinks we Can have juste one ?
You buy special strip led or the basic one ?
Hello , what do you mean by alimentation? 1x Power Supply + 1x Controller
@@jansony2670 you weld the two 5m strip on one controler?
You use basic strip for the build ?
@@sentex54 no welding or soldering ❗ used a 3 pin connector splitter 👍 on one side is connection to Bluetooth controller and on the other side are 2x LED stripe 3pin cable connector 😀
@@jansony2670 thanks. Can't wait to see part 2 😮
@@sentex54 a.aliexpress.com/_dXJ1oLv
No problem 😀👍
Brauche ich 2x 5m LED Stripe oder reicht 1x 5m für alles?
Genau 👍 die werden dann am anfang mit einem splitter verbunden ☺️
@@jansony2670 2x 5m LED or 1x 5m LED. 10m LED or 5m LED?
@@andyfischer7277 2x 5meter
@@jansony2670 thx
part 2 its 2022 now boss we need you
What's the spec's on the power supply?
5 Volt and 10 Ampere
Any news on Part 2 Yet
Will upload on christmas Holiday 👍
What is the maximum of downscaling, because i only have an anycubic i 3 mega
@@sonnenspeedyoffical2830 unfortunately downscaling is not possible. The parts will not fit togheter anymore.
Bro can I make these at home
Yes offcours 👍
Dachte part 2 kommt Montag
warte auch schon ungeduldig :D
how many segments and how many pixels per segment did you use?
How big are the holes for the LED-Stripes?
Wenn du alle kosten zusammen rechnest auf wieviel kommst du da ? :D überlege mir auch einen 3d drucker zu kaufen, da ich eine Nanoleafsucht habe 🤣
Materialkosten für 14panels liegen um die 120.- Euro. Der drucker kostet um 400.- Euro 😝
Danke für die antwort :) ich finde deine sogar besser als die originalen :D
@@Schmooker vielen dank, mir war vorallem wichtig das man die einzelnen LEDs nicht sieht. Was ja beim Original nicht wirklich gelungen ist ☺️😜
Verlaufst du deine zufällig ? xD
@@Schmooker zurzeit noch nicht 😂 😊 werde in 6 monaten ein neues projekt veröffentlichen, vieleicht verkauf ich sie ja dann aus platzmangel 🙃
I was not getting a good 3D printed nano leaf diy ....and found your video
I really need help my 3d printer has troubles printing out triangles lol. It doesn’t stick when makin the angles
Did u try to use a brim?
No.. what’s that?
can u please provide me the 3d print file of nano leaf panel
Hey you can find all the files here 👍
www.thingiverse.com/thing:4353656
A quand la partie 2?
any one plz help me .. new to 3d printing ..
which parts to print for the build i am not able to understand , there a many similar parts ..
need to know . which parts are need to complete one leaf # of parts etc and can i scale it down a bit ?
Hey Farukh
Scaling down is not possible. The difusor will not fit anymore if you scale it.
The full part list and build plan you can see at 04:12 in the video
Thank yoi 😁
@@jansony2670 how about i scale every thing down proportional.
Top , bottom and the diffuser
Waiting for part 2, please
where is part 2?
Imma try this now I bought a 3d printer !
. Anyone that is going to try this keep in mind he used natural pla for the front sheet panel and inner defuser,
The rest base and spacers are white pla
For some reason I feel like eating a croissant now ;-)
Question are you using Arduino
No 😁 Smartphone Bluetooth app 👍
that lamp looks great! any chance of getting second part?
Yes Soon ☺️😅
@@jansony2670 That's good news. Thank you sir :)
This is really cool but the tutorial feels incomplete. How are you controlling the LED's? Are you using addressable strips or just regular strips? Is there other parts I am missing?
Hey thx for your comment 👍 this is part 1, i will release part 2 soon. The corona virus destroyed time planing for this project. And now i have to much work and almost no time for making videos. I just released part 1 of the tutorial so you can already start with printing the parts 😊 and part 2 will come in 1-2 weeks. Tomorrow full part list and instructions in the description 😁
Good work but, that's not how the original works bro... Why don't you make it plug and play? Take some LED pins and mount them on the sides, on one side a female connector and on the other 2 sides male connectors, then also mount some cheap small magnets so it will hold it together. When done, you can just plug the panels on other panels like the original one.
Any hint what kind of signal splitter he was using?
Sorry guys, part two is coming in christmas holiday 😊
what adapter do you use for those 14 led lights? is 5v 10a enough?
Hi, would you sell me the material to assemble it in my house. ????
Waiting for Part 2
Where can I buy that kind of LED strip?
Hey link is in video description 👍
hi bro can u plz reply ...
i really like your design .. have some questions .. is the diffuser also printed .. can i use any other diffuser material .. and there are different body designs which oe to use .. plz explain
Hey Farrukh the difusor is printed and spray painted with a thin coat of white. You can also use other milky glas materials.
At the moment there is only the big orbs pattern. I will be adding more as soon as i can 😊👍
can you give me the file?
Maan. I need part 2 so badly. When will you be releasing the it? Cant wait. Instant sub from me :)
1 week ☺️👍
Still gonna make a part 2 anytime soon?
1 week 😊👍
when are gonna release part 2
I was thinking of doing the one with the Arduino and soldering but seeing this, I think I've changed my mind.
LED Signal 1 to 2 splitter 3pin - I can only find 4 pin options. I assume this will still work assuming you connect it to the right ports?
What app did you use for the color combinations?
And where's part 2? :)
Just saw your update in the description. Sorry to hear about the problems.
Possible APP mystery solved, at least for Android, This app looks like it should work
play.google.com/store/apps/details?id=com.spled.pzse
I get my lights and adapter, ordered this one. According to the app it should work.
www.amazon.ca/ALITOVE-Controller-Control-DC12V-24V-Addressable/dp/B07SG394ND
Thank you so much for putting this out. It helped out a newbie like me !