Internal Grinding on the Lathe
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- For MrCrispin Merchandise visit: mrcrispinenterprises.com
Instagram: mr_crispin
In this video I continue work involving the spindle nose and spindle tooling re grind.
For more information regarding the set up see the video 'Re Grinding a Lathe Spindle Nose'
The Lathe is a Harrison 190 and the Tool Post Grinder is a Dumore No.44
“So you think I don’t know what you do with my toothbrushes”, your brother.
Your videos are getting better and better with every new episode. Love the dry humor as well!
The humor was moistened, with tea. Tea hea hee!😋
With the Trilby Harvest underway, the Crispin Family was sure to feast well that season.
Love it.
Very funny sketches, I laughed and laughed when your butler came in I really wasn't expecting that!! Nice bit of grinding as well
Caption competition. "Getting my hat stuck up in a tree wasn't the worse thing that happened to me today. But it's up there"
Don't worry, ..... I'll get my coat😁😁
Your family and friends have a great scene of humor 😄 Thanks for sharing 👍
"Im unsure if that was a bad gust of wind or a cruel trick by brother Billy"
Thanks for taking the time to pass on your knowledge and experience
Thanks for the video Mr Crispin,you can’t beat a multitude of setting up problems. Well done.👍👍
"I phoned the Fire Brigade like you asked me to my dear, they were awfully rude you know, said they rescue cats, not hats".
🤣👏
"The aftermath of The Affair Of The Toothbrush". Thanks, Mr Crispin, and only the best butlers keep a watchful on Sir's box hedges.
Nice Abom 'crane' reference. I was getting deja vu when you were cleaning the rust off that 4 jaw.
Very nice. Whenever I see that you have posted a new video I get a cup of coffee, get comfortable in my easy chair, and stop worrying about anything for the duration.
Thats very nice to hear
Unorthodox work holding goes hand in hand with unorthodoxly having a gallon jug of oil on top of a cabinet halfway over the edge ready to fall and spill with the slightest change of winds.
And all done with utmost deliberation 😀
G’day Chris and greetings from Tasmania Australia 🇦🇺 I’ve been watching you for a while now and I remember when you started off in that tiny tool shop. How you and your brother turned that dark room into a very comfortable tool shop, even your personality change and love your sense of humour. Great to see you again regards John
Thanks
Timely for me. I am getting more-and-more interested in all forms of grinding. Thanks for the excellent video.
Caption. “Where is Jefferson just when I need him!”.
As always so interesting to hear your thought processes whilst you tackle such a project 👏👏😀👍
Having spent a working life on universal grinding machines in machine tools at Coventry I found this very interesting looking forward to next video 🇬🇧👍.
So nice of your boss to stop by.
Once again, fascinating and interesting. Precision engineering at its best. Your tea must have been cold at the end. LOL. Caption: ‘I went too far this time’. Cheers Mr Crispin.
No it really isnt. the guy destroyed the fit just to improve the finish.
You Tube must be payin good money if you have a Butler now, anyway great film as usuall. As to the hat in the tree how about 'Bugger competely missed the Shaper this time'.
I cracked up when the butler came and asked about tea time. Not something you'd see anywhere else in the world.
It's repeated the length and breadth of the country at various times of the day, I had mine delivered to me whilst watching this video, so a fitting tribute to a civilised way of life.
Hi Kurt, Tea is very important to one's quality of life. If you TH-cam the video of, "How to Drink Tea in a Tank" you might get a surprise. The tea making facility in the Challenger 1 Main Battle Tank is shown at 9:54 mins and these were updated for Mk.2 and will no doubt be further improved for the new Mk.3.
A pocket full of brothers toothbrushes and the addition of a butler? Priceless!
How about: “The willing man never knew his hat could fly that high but he found a way to get it down.”
I have been thinking about doing this to my lathe and chucks for a year or two. Watching these video's a couple more times will probably give me the courage to start...
Caption " while observing this new born species "the machinist" I noticed when they are tired and hungry they climb back up there tree to there nest for rest, all the while, with the mother watching from below in case it falls then she can burst out in ritual, hilarious laughter"
Great channel, keep up the awesome videos.
Cheers Wylie
Australia
I love your work so much, but your personality is what makes you king.
Thanks
Nicely done Sir! Can't wait for the next episode of Mr Crispin Abbey.
Now my questions are: Where is the main source of grinding stones, WHO makes sure the stones are perfect for grinding, and HOW do we know that the grade of the stones is just right for the job in hand.
A superficial explanation will suffice.
PS: Totally ignorant of that type of engineering, as it was impossible for me to get to do this type of studying, due to my country's (Bloody Greek Politicians) unwillingness to provide for wide ranging Heavy Engineering.
Marvelous explanations @MrCrispin.
Thank you.
Crispin, that was nerve wracking to watch at first but I soon got used to it lol Your attitude to getting the accuracy you want is exemplary. This is what we would expect of a Rolls Royce engineer. Looking forward to the next episode sir!
Just stumbled over this vid by accident and man this is great content! Great setup, very nice result and loving the humor. Will be back for more!
Thanks
When doing a job like this myself I would tend to hit the outer surfaces as well so if you ever set it up again you have good surfaces to indicate from.
“A behind the scenes insight into the unintended consequences of MrCrispin’s infamous hat throwing video introductions”
Entertaining. Informative. Easily the best thing to watch on an advertising led Saturday night load of rubbish. Ignore detractors mr crispin.
Another great video, Sir! So very informative and entertaining, enjoyed it immensely! Was so happy to see your brother's toothbrush again, so very good of him to loan it, as he does. Cheers, for now!😎👍
Great idea with the gauge block.
Yes I found your video very interesting and informative. I like how to explain with detail, handling the unforeseen issues as the arrived.
Ottimo lavoro MrCrispin!
Thrust tests on the new Rolls Royce jet engine went better than expected!
Cracking watch Mr Crispin, and some brave and interesting setups. I myself prefer a glass of Port, but other than that I think we would agree!
Phil
I'm a great fan of port but normally for later on in the evening!
Caption: "Take 29 from the cutting room floor - Crispin misses the machine head yet again!"
Very good!
Insanely entertaining video as always Crispin ! My caption would be "I swear that this is the last time i steal my brothers toothbrush "
I don't know about the Sherry though ! Maybe a coffee royale washed down with a slab of beer 🤣🤣🤣
Good evening Mr. Crispin,
I find it a relief to learn that the civilised habit of availing one's self of a relaxing and medicinal sherry at that time when one's work for the day is complete is still practiced in your area of Great Britain. On a different note and with regard to the removal of the hat from the tree, one might consider the use of a blank shotgun shell discharged from a suitable fowling piece. My preference would be a 410 shotgun. Simple but effective. However, such a method may be frowned upon by the authorities if used in a residential or otherwise populated area.
Yours sincerely,
Bushman.
Queensland.
Australia
Excellent as always! I absolutely love your sense of humor Mr. Crispin!
In a vane attempt to shield his buxus sempervirens from an impending flood, Mr Crispin tosses his famous hat over the beleaguered box and not for the first time tries a bit of tree hugging.
Just thought of another: Using only a few simple props, Mr Crispin explains the concept of the Z axis.
Yes that one is definitely on my list!!
Thank you for the teaching.
Hey! I want my own butler at the lathe. No fair. You Sir........... Are a gentleman and a scholar.
Thanks useful, great to meet you 🙏
Outstanding Mr C. Nice to see you now have a personal valet, very English!
Caption: Mr. Crispin was a rolling stone, wherever he treed his hat was his home
Excellent video, and please give my regards to your brother and to Jefferson.
nice crosshatch finish on the face....it looks good.
My caption "No Mr Crispin, you won't find any eggs in the hat!"
Sin ánimos de menospreciar su trabajo ,estos hacia hace más 60 años y me quedo corto!!
Hoy en día hay insertos de "pkd " que cumplen la misma función que una muela por abrasión!!
Alway an enjoyable watch at Mr. Crispin’s.😊
Well done. Thank you for another informative and humourous video. Your 'man' looks like he could be a cameo by another relation 👀
18:58 - LMFAO WTF??? He was seriously interrupted too... 🤣
MrCrispin, hopefully, here once again.
Greetings from Poland, the homeland of that plate :)
Thanks for bringing us along.
“Not the chucking hat-trick Crispen was looking for”
Well grounded Mr C.
Caption: She - I hope there's no birds nest in there! Mr. Crispen - If there is we'll be having squab for dinner tonight!
Caption..."Mum, he's right there! Yes he's invisible but he's standing on his head...can't you see the hat?"
Although I'm not a machinist and it's not a hobby of mine (love model steam engine) , but I am fascinated and have learnt so much from you esp setting up and truing of equipment , keep up the excellent work 👍👍👍👌
Thanks
First, once again 😊 I’m glad to see you finally got a Butler.
caption: "we now return to our live coverage of the Yorkshire games"
Well done. I have D1-8 spindle and taper is holding so hard that i have to pry chucks in order to release them after unlocking studs.
Release is followed with "thud" sound.
A whole new level of tongue in cheek.
Mr Crispin’s new source of funding was nuts
Bugger! Spent 5 minutes cleaning up the laptop after spitting out my tea when the butler came in!!!
So fine. I like it !
Don’t call the fire department I’ll save it. Great video as always
👍 good show! Always well though out and explained.
Finally, Mr. Crispin was barking up the right tree.
I gave up after reading the toothbrush comment. That would be hard to beat. 😂
And Cheers from the pacific northwest of the U.S.
X2
Excellent! Thank you for such a detailed video.
Nice work and an entertaining video. Cheers from Southern California.
Ah Humbug...My favorite hat... I am made to clime cut, not climb a tree!!!
Very interesting video, thank you
Regards,
Paul
Its something like in a song .....all around my hat! 🤣🤣🤣
Very interesting and typically quirky!
Caption: "Silly hat, trees are for the birds"
almost... almost got me tempted to start work on that heald head i have... absolute monster... and on the very end, out on this long arbor... a wee lil 1/2 inch stone :) i suspect its got some really nice bearings in there.
i think the whole casting weighs more than my lathe.
Very interesting! The triumph 2000 at work has a fairly poor spindle nose. The 17 inch Harrison is much bigger but same style cam lock in better condition
Great result . I run 100 dia straight wheels on my one with a 3/8 shaft . I find it gives a better result all round . Nice '' Hat-trick''' ! 👍
I came up with your clamping idea before you mentioned it, woah hey, bravo me, hahaha😃
Excellent as always!!!
The martial music was a nice touch.
Caption: MrCrispin - Field and Stream edition.
Caption
"It's all right baby, daddies got you."
The AL rivets were a cool idea
Very excellent. Good description of setups and the various issues. 👍. Insufficient info on the tea though, and absolutely no discussion of proper biscuit choice.
nicely done,
I say ol chap,i thinks we should have caught a few crispn leaves by now!
Great video as always.
I can’t Waite for part 2 love this video. But I do take exception to Jeffery he did not ask if you wanted any rubber ducklings in your bath water lol 😊
Caption! My work mates said I should branch out on my channel.
Glad my lathe's D1-4 nose and back plates weren't handled by Bubba prior to my acquisition. I think I'd look to my wallet and not my grinding skills if they were!
Why yes, every shop needs a butler!🤣
Billy's revenge
"Some exercise as a break from the daily grind"
"D....n Rooks will steal anything to make a nest. I hope it's clean when I get it"